Epson Et-7750 Setup

Start Here – Installation Guide

Read the following instruction to the Epson ET-7750 Setup for the printer before you start the printer operations.


  1. Unbox the printer and check for the printer accessories like ink cartridges, power cord, installation CD, and manuals.
  2. Carefully remove all the packaging tapes and protective materials from outside the printer. Also, raise the scanner unit and remove the protective materials from inside.

Filling ink tanks

  1. Raise the ink tank cover and open the ink tank cap.
  2. Take the ink bottle and remove it from the packet.
  3. Now, turn open the ink bottle cap, place the bottle outlet onto the corresponding ink tank's inlet port.
  4. Lift the bottle upright and wait until the ink fills the tank. Do not squeeze the ink bottle to force the ink into the tank.
  5. When the ink tank reaches the maximum level, remove the ink bottle from the filling port and close the ink bottle with the cap. Also, close the ink tank cap.
  6. Similarly, fill all the ink tanks with the corresponding color inks.
  7. Perform the ink charge using the next step.

Power connection

  1. At the back of the printer, find the power port, and connect the power cord.
  2. Then plug the other end of the power cord to a wall socket, and press the power button on the printer's control panel to switch it on.
  3. In the control panel, set the language. Following that, the message 'Start Here' appears on the display panel.
  4. Now, press OK, then press and hold the OK button for three seconds.
  5. Press the Start button to start the ink charging process and wait until the completion message appears on display.
  6. Next, press OK and continue to set the print settings.
Epson Et-7750 Setup

Feeding paper

  1. Lift the control panel, open the front cover and draw the paper cassette out of the printer.
  2. Move the paper edge guides to the cassette’s edge and alter the front edge guide according to the paper size.
  3. Arrange the papers and place them in the cassette with the print side facing down.
  4. Position the paper against the front edge and adjust the paper edge guides to fit the papers.
  5. However, see that you do not squeeze or fold the paper, and the paper level is below the maximum limit mark.
  6. Replace the paper cassette into the printer, extend the paper output tray, and go on to set the paper settings on the control panel.

Software installation

  1. After the hardware setup is complete, you have to install the printer software on the computer.
  2. The printer driver is available on the installation CD and also can be downloaded.

Ecotank Epson Et-7750 Setup For Driver On Windows 10 [Download & Install]


  1. Open a browser on your computer, then visit the official Epson website and search for the printer model for which you want to download the driver.
  2. Under the Downloads section, select Windows 10 (64 or 32 bit) as the Operating System from the drop-down menu.
  3. Continue to download the driver package to the Windows computer.


  1. Double-click the downloaded printer software package and open the installer file.
  2. In the installation window, read the license agreement and accept it.
  3. Following that, select the software and click the Install button.
  4. Choose the suitable connection type, select the setup option, and continue with the remaining prompts.
  5. Complete the installation steps and close the window.

Ecotank Epson Et-7750 Setup For Driver On Mac [Download & Install]


  1. Go to the Epson website from a web browser.
  2. Search the Epson printer model on the printer's webpage and go to its support page. Then click the Downloads tab.
  3. Select the appropriate Mac version from the Operating System drop-down list.
  4. Click the Download link beside the driver's name to download the printer driver to Mac.


  1. Locate and open the Epson driver installer file.
  2. When the installation wizard opens, choose the software to be installed in the Software Selection window and click Install.
  3. After reading and accepting the license agreement, select Continue.
  4. Select the connection type and then the setup option.
  5. Follow the instructions displayed on the installation wizard to complete the driver installation.

Epson Ecotank Et-7750 Manual Download

The printer manual is available online, which can be downloaded in case you have lost the user guide booklet. The steps to download the manual are given below.

  1. Launch the web browser window, type the official Epson website’s URL in the address bar, and press Enter.
  2. As the page opens, search for the printer model Epson Ecotank ET-7750 and access its support page.
  1. On the support page, click the Manuals and Warranty tab. When the tab expands, click the PDF link beside the user manual you want to download.

Epson Et-7750 Setup For Wireless Connection

Consider the below steps to set up the Epson ET-7700 printer to a wireless network.

  1. Turn on the wireless router and connect your computer to the wireless network.
  2. Note down the network name (SSID) and the network password.
  3. Switch on the printer and keep it turned on during the entire setup process.
  4. Download the Epson printer driver on your computer or use the installation disk to open the driver package.
  5. Run the driver installer file and click the Install button in the installation wizard.
  6. Choose Wireless connection as the Connection type; then, select the suitable setup option.
  7. If you need to connect to the Wi-Fi network automatically, click Yes under Wi-Fi Auto Connect.
  1. Now, select Using control panel as the Wireless Network Setup Method.
  2. The software scans for the available networks, and when the network name appears in the window, note down the SSID and password of the wireless network.
  3. Next, move to the printer, press the home button on the control panel, and select Wi-Fi Setup.
  4. Under Wi-Fi Setup, choose Wi-Fi (Recommended), after which the printer scans for the router network.
  5. If the network name is displayed, select it and enter the password to connect
  6. Otherwise, enter the network SSID manually and try to connect to the network.
  7. When the connection setup completes, proceed to print a connection report.

Epson Et 7750 Scan Setup

Scan using the Control panel:

  1. At first, connect the scanner and the router via the wired or wireless network.
  2. Then connect your computer to the same router network and install the scanner software.
  3. Reboot the computer after installing the necessary software.
  4. Open the document cover of the printer, place the document to be scanned on the scanner glass, and close the cover.
  5. Press the home button, then navigate to the Scan menu and select it.
  6. The scan options appear on display, choose any one of the options, and continue to proceed.
  7. In case the scanner and the computer are connected using a USB cable, then you can directly store the scanned document to the computer.
  8. Press the Start button to begin the scan.

Epson Et-7750 Setup To Scan Multiple Pages

Epson Scan 2 program:

  1. The Epson Scan Utility program enables you to scan multiple pages.
  2. After connecting the scanner and the computer, make sure the Epson Scan utility is installed on the computer.
  3. Place the original document on the scanner glass of the printer and launch the scanning program on the computer.
  4. In the Epson Scan 2 window, select the printer name and set the scan settings in the Main settings panel.
  5. Enable the checkbox near Add or edit pages after scanning and click the Scan button.
  6. When the scanning is done, add the next document for scanning.

Epson Et-7750 Setup For Troubleshooting

The printer faces various issues related to the network, paper, print, print quality, etc. When these errors occur on the printer, an error message appears on the printer's display panel. By following the on-screen instructions, you can resolve the printer errors. To get the guidelines on the printer's display panel, press the Home button, then navigate to the Help menu and press OK. You can also contact our support team to fix the printer issues easily.

Epson Et 7750 Offline

If the printer stays in the offline mode, then try to fix the problem using the below solutions.

  1. Open the print window on the computer and check if there are any paused or pending print jobs. If any, then remove those jobs and restart the printer.
  2. Check the network connection of the printer, and if it is not proper, then disconnect all the connections and reconnect them to fix the connection problem.
  3. Using the older version of the printer software can be a reason for the problem. So update the printer software and verify that the printer returns online.

Epson Et-7750 Setup For Factory Reset

Performing a reset will change all the printer settings to the default factory settings. When you cannot overcome a problem, then go for the reset option.

  1. Open the home screen by pressing the home button on the printer’s control panel.
  2. After that, select the Settings option and choose Restore Default Settings.
  3. Select the appropriate reset option and proceed to reset.
Epson Et 7750 Troubleshooting

Epson Et 7750 Print Quality Issues

After you print, if you find the print quality is not good, then use the below measures to make the print quality better.

  1. Start the nozzle check to find if there are any clogged print heads. If found, then clean the print heads.
  2. Check the ink level in the printer’s ink tank. If it is low, the print quality degrades over time. So refill the ink tank with the required amount of ink.
  3. See that the paper you load in the printer is not damp, as it can smudge the ink on the paper. The above mentioned steps are the procedure for Epson Et-7750 Setup.
printer setup support