Epson ET-2750 Setup

Step 1: Unpacking the printer

  1. Take out the Epson ET-2750 setup from the carton.
  2. Remove the packing materials such as tapes, protective films, and plastic covers.
  3. Open the scanner unit and remove the packing materials.

The printer accessories included in the printer package consist of the following.

  1. Power cord 
  2. Ink bottles
  3. Installation disc
  4. Manuals
  5. Power cord

Step 2: Filling ink tanks

  1. It is recommended to use only genuine Epson ink to fill the tanks.
  2. Raise the ink tank cover.
  3. Open the cap of the tank that you are going to fill.
  4. Unpack the black ink bottle and open the bottle cap.
  5. Insert the ink bottle upside down into the ink tank slot.
  6. Make sure not to squeeze the ink bottle as the ink will flow automatically and stop when the ink tank is full.
  7. Replace the tank's cover and close the black ink bottle's cap.
  8. Continue with the same procedure to fill the other ink tank slots.
  9. Verify the color code on the ink tank and make sure to fill the correct colors.
  10. Close the ink tank cover and printer cover.

Step 3: Connecting the Power Cord 

  1. Connect the supplied power cord to the Epson ET-2750 setup's rear side and plug the other end to an AC outlet.
  2. Raise the control panel of the printer to a convenient angle.
  3. Touch the Power button on the printer to turn it on.
  4. Select the language using the navigation buttons. Press OK
  5. Now, press the Help button on the control panel and hold it for about three seconds to start the ink charging process.
  6. Select Done when the ink confirmation message displays on the LCD.
  7. Make sure not to turn off the printer until the process is complete.
  8. You can also refill the ink tanks if required.
    9.  
Epson ET-2750 Setup

Step 4: Loading Paper

  1. Pull out the paper input tray.
  2. Move the paper guides to the ends of the tray by sliding them.
  3. Fan a stack of paper and load it into the input tray.
  4. Slide the paper guides to the paper's edges such that they do not fold the paper edges.
  5. Pull out the paper output tray.
  6. Set the correct paper settings on the control panel of the printer. 
  7. Make sure that the paper size you have loaded and the paper size you have set are the same.

Step 5: Installing the printer software

  1. Install the Epson printer software on your computer to connect the printer and computer.
  2. Choose the preferred type of connection.
  3. You can print directly from any iOS devices by connecting the printer and device to the same wireless network.
  4. Check the network settings by printing the network configuration sheet.

Epson ET-2750 Driver Download

Driver for Printer
  1. Open your browser and type the official Epson website URL in the address bar.
  2. Go to the Epson Support page and select Printers.
  3. Choose All-In-Ones and select the ET Series. Select your printer model from the displayed list. 
  4. Click the Downloads tab and choose your operating system. Select the required driver for your computer and click on the Download button.
  5. You can also click on the Driver Download button on this page to download the driver.

Epson ET-2750 Manual Download

User Manual for Lexmark X792de Setup
  1. Go to the official Epson ET-2750 setup website.
  2. Click the Support tab and choose your region from the displayed list.
  3. Type the printer model number and hit the Enter key.
  4. Select the Manuals and Warranty tab and choose the required manual.
  5. Click the PDF link next to the manual to open the document.
  6. Click on the Download icon and save the PDF file to a preferred location.
  7. Otherwise, click on the Manual Download button available on this page to download the manual.

Install Epson ET-2750 Driver Software

  1. The Drivers and Utilities Combo Package Installer is the most recommended driver for the printer.
  2. You can either install the driver from the installation disc or use the downloaded driver.
  1. Run the installer file and accept the license agreement.
  2. Choose the preferred connection type when prompted and continue with the on-screen instructions to complete the installation.

How To Check Ink Levels On Epson ET-2750?

  1. You can visually examine the Epson ET-2750 setup's ink tanks to check the ink levels.
  2. If you have connected the printer to a Windows computer, double-click on the Printer icon on the taskbar.
  3. You can check the ink levels on a connected Mac computer by opening the System Preferences window.
  1. Select Print & Fax. Choose your printer and click Options & Supplies.
  2. Click Utility and select Open Printer Utility.
  3. Select Epson Status Monitor to check the ink levels.
  4. You can now refill ink in the required tanks.

Epson ET-2750 Wifi Setup

  1. Configure your wireless router before starting the wireless connection process and keep it turned on.
  2. Load the installation disc into the CD drive of your computer.
  3. Run the installer file and choose the Wireless Connection in the Printer Setup window when prompted.
  4. Select the 'Epson ET-2750 setup for the first time' option and click Next.
  5. When the Wi-Fi Auto Connect window appears, click Yes.
  6. Select the 'Using control panel' option.
  1. You can see the network credentials on the screen. 
  2. Touch the Home button on the printer.
  3. Select the Wi-Fi Setup option using the navigation buttons.
  4. Select the Wi-Fi (Recommended) option and select OK. 
  5. Navigate to the Wi-Fi Setup Wizard section and choose your wireless network name and type the password correctly. Press OK.
  6. Continue with the on-screen instructions to complete the installation.
  7. You can now print and scan wirelessly from your computer.

How To Connect Epson ET-2750 To Computer?

  1. You can connect the printer and computer using Wireless connection or Direct USB connection.
  2. For a Wireless connection, connect your computer to the network.
  3. Install the printer software and choose the connection method as Wireless. 
  4. For a Direct USB connection, connect the USB cable to the printer and computer when prompted while installing the software.
  5. Once you have connected the printer to your computer, you can easily print and scan from your computer.

Epson ET-2750 Power Cleaning Printer Head

  1. Make sure that the Epson ET-2750 setup is turned off.
  2. Now, check the ink levels visually. If you find it below 1/3rd level, fill the ink tanks.
  3. Press the Power and Help button at the same time and hold them until you see the Power Cleaning screen. 
  4. Continue with the on-screen instructions to run the power cleaning process.
  5. Once the cleaning is done, print a nozzle check pattern to check the print quality.

Epson ET-2750 Print Setup

To print from your computer, you have to install the printer driver. Make sure to connect the Epson printer and computer by any means. Once you have set up the connection, open the document, web page, or photo you want to print. Select the Print command and set the required printing preferences. Now, click OK to print the document.

How To Scan On Epson ET-2750?

Make sure to connect your computer and Epson ET-2750 setup to the same wireless network and install the printer software on your computer.

  1. Open the scanner cover and place the document on the scanner glass.
  2. Press the Home button and select the Scan option.
  3. Set the preferred scanning settings and press Scan.
  4. Once the scan is complete, select an option to save the scanned document.
Epson ET-2750 Scan Setup

How To Scan Multiple Pages On Epson ET-2750?

  1. To scan multiple pages, you have to place the documents on by one on the scanner glass.
  2. Open the scanning software on your computer and set the scanning preferences.
  3. Click on the Scan button.
  4. After the first page is scanned, click on the Add or + button.
  5. Continue with the same procedure to scan all the pages and save the scanned document to your computer.

Epson ET-2750 Fax Setup

The Epson ET-2750 setup does not support fax and you can't send a fax.

EPSON ET 2750 FAX SETUP

Epson ET-2750 Firmware Downgrade

  1. If you are facing issues after an update, you can downgrade the firmware.
  2. First, turn off the Epson printer.
  3. Touch the Home and the Power button on the Epson ET-2750 setup and hold it for about 30 seconds.
  4. When the display shows normal, the firmware will be downgraded.

Epson ET-2750 Firmware Update

  1. Connect the printer and computer prior to updating the firmware.
  2. If you want to update the firmware of the router, visit the official Epson website.
  3. Now, select the printer model. Click the Downloads tab.
  4. Select Firmware and click on the Download button next to the latest version.
  5. Run the downloaded file and continue with the on-screen instructions to update the firmware.
  6. Restart the Epson ET-2750 setup once the updating process is complete.

Copyright © 2020 - 2021 printer-setup.us | All Rights Reserved.

printer setup support
➤