Epson EcoTank Pro ET-5850 Setup

You need to install the printer’s hardware and start performing the different functions the printer supports. Follow the below procedure for Epson EcoTank Pro ET-5850 setup

Epson EcoTank Pro ET-5850 Setup

EcoTank Pro ET-5850 Printer Guidance

BAsic setup

1. Unbox

    Place the carton on a stable surface and unbox the printer.
  • Check if you have received the other printer accessories in the box.
  • Peel off all the packaging tapes and remove the protective materials from the inside and outside of the printer.

2. Fill up ink tanks

  1. Keep the ink tank cover open; after that, unfold the cap of the ink tank, which you are about to fill.
  2. Now, remove the new ink bottle from the package, and turn open the bottle cap when you are filling.
  3. Place the bottle opening into the ink tank inlet port and hold the bottle until the ink tank fills.Also, see that you do not squeeze the bottle.
  4. After the ink tank is full, take the bottle out from the filling port and close the bottle with the cap.
  5. If there is ink remaining in the bottle, you can use it later.
  6. Continue to fill the other ink tanks using the corresponding ink bottles and finally close the ink tank cover.

3. Power connection

  1. Attach the power cable to the printer, then plug the other end to a wall socket.
  2. Switch on the Epson printer by pressing its Power button.
  3. See if the printer display shows any error message, if there is no message, then the printer setup is correct.

4. Basic Settings

  1. On the home screen, set the language, time & date, and region/country for the Epson EcoTank Pro ET-5850 setup.
  2. Following that, the screen displays the message “Start Here.” At that time, press the OK button for 5 seconds to start with the ink charge in the printer.
  3. For each color in the printer, you have to confirm the ink charge on the printer’s LCD panel by selecting Proceed, and then tap Startto begin ink charging into the printer system.
  4. When the ink charging completes, a message displays on the printer screen. Now, select Close

5. Feed paper in the cassette

  1. Draw out the paper cassette from the printer and move the paper guides to the extent of the tray.
  2. Arrange the paper stack by keeping the print face down and then place it against the front edge of the cassette.
  3. Now, adjust the paper guides to the edges of the paper, but do not bend or cripple the paper.
  4. Verify that the paper level is below the maximum limit indicator.
  5. After that, replace the paper cassette into the printer and continue to set the paper settings on the LCD screen.

6. Fax connection

  1. Connect the telephone cord from the telephone wall jack to the LINE port on the printer.
  2. Open the Fax settings on the control panel and make the necessary settings.

7. Install printer software

  1. Later, when the hardware setup is done, proceed to install the Epson printer software on your computer.

Epson EcoTank Pro ET-5850 Driver Download

The printer driver enables you to manage and control the printer operations from the computer when both the devices are on the same network. The printer driver is available online and on the installation CD. Follow the steps to download the driver.

  1. Open the web browser on your computer and enter the official Epson support website.
  2. Find the Epson EcoTank ET-5850 printer model and go to its support page.
  3. Click Downloadand choose the appropriate Operating System from the drop-down menu.
  4. Select the driver link and continue to download it.

Epson EcoTank Pro ET-5850 Manual Download

  1. The Epson EcoTank Pro ET-5850 setup manuals are present on the manufacturer’s support site.
  2. You can get the printer manuals in PDF format by visiting the support site of the Epson printer model.
  3. Under the Manuals and Warranty tab, the Notices& Warranty, Installation Guide and User’s Guide are available.
  4. Click the link and download it on your device.

Install EcoTank Pro ET-5850 Driver Windows 10

Epson printer driver is in-built on the Windows 10 system; therefore, you need not run the installation separately. By adding the printer to the computer, you can install the printer software.

Add the Printer to the Windows 10 Computer:

  1. Power on the printer and directly connect your Windows computer and the printer using a USB cable.
  2. Now, go to the Settingswindow, then select the Devices menu, and choose Printers & Scanners.
  3. Click the Add a printer or scannermenu, select the printer name, and click Add device.
  4. In case the printer name did not appear, select Add a local printer or network printer with manual settings.
  5. Next, select the printer port and then choose the Epson brand in the Manufacturer list.
  6. The different Epson printer model names appear in the Printerspane, click your printer model and select Next
  7. If the printer model is not present, then update the Windows system and select the name.
  8. After installing, close the window.
Epson EcoTank Pro ET-5850 Driver

Guide: EcoTank Pro ET-5850 Wireless Printing

You can print through a wireless network by following the below steps:

  1. At first, complete the physical setup of the printer, then turn on the wireless router network.
  2. Note down the Network SSID and the password and connect your computer to the router network.
  3. The printer must remain turned on during the entire process.
  4. The printer driver package is required to install the software on your computer.
  5. You get the driver package online or from the printer’s installation CD.
  6. Next, open the software package and run the installation.
  7. Read the license agreement and accept it.
  8. For the Connection method, make sure to select Wireless connection and follow the guided instructions to complete the installation.
  9. Then, choose Using Control Panelas the Wireless Network Setup Method.
  10. After which you have to enter the wireless network name and password to connect.
  11. Next, move to the printer, press the Home button on the control panel, and navigate to the Wireless Settings 
  12. Under Wi-Fi (Recommended),go on to choose the Wi-Fi Setup Wizard
  13. Find the wireless router network name and enter its password to connect the printer to the network.
  14. Finish the on-screen instructions of the printer software on the computer to complete the wireless setup.
  15. Now, add the Epson printer to the Devices list on your computer.
  16. Open the document or photo which you want to print and click the Print
  17. Choose the right printer model in the Epson window that appears on the screen and change the necessary print settings.
  18. Click OKand proceed to print.
  19. Make sure that the Epson EcoTank Pro ET-5850 setup and the computer are connected to the same network for undisturbed operation.
Epson EcoTank Pro ET-5850 Wireless Printing

Epson EcoTank Pro ET-5850 Wifi Setup

Using Wi-Fi Direct:

The Wi-Fi Direct mode of the printer lets you connect your computer or mobile device without the router network.

  1. On the printer’s control panel, go to the Home screen and select the Wireless connection
  2. The Network Connection Settingsmenu shows up on the LCD panel. Choose Wi-Fi Direct and then select the Start Setup
  3. Select the OS version of your device. If it’s a mobile phone, then scan the QR code that appears on the printer display.
  4. In the case of the computer, an SSID and password will appear.Use them to connect the computer to the printer network.
  5. When the computer is successfully connected to the printer, the Wi-Fi setup is done.

Epson EcoTank Pro ET-5850 Scan To Computer

  1. The printer and the computer on which you want to store the scanned document should be on the same network.
  2. Now, lift the scanner cover and place the document on the scanner glass.
  3. Next, select the Scanmenu on the printer’s home screen and then choose Computer under Scan to.
  4. The computers connected on the network will appear on the screen; select the correct computer nam Following that, set the scan settings and choose a suitable option in the Select actionmenu.
  5. Press the Sendbutton on the control panel to start the scan operation.

Epson EcoTank Pro ET-5850 Setup Troubleshooting Guidance

The printer encounters trouble when there is any physical damage, the setup is incorrect, or if the device does not satisfy the minimum requirements. In those conditions, the error message appears on the printer’s display. See that you resolve the error and fix the problem.

Guide: Epson EcoTank Pro ET-5850 Reset Toner

Before you refill the inks tanks in the printer, first, check the ink levels in the ink tanks.If the ink level remains below the lower line, then the ink is low in the tank and needs to be refilled.

However, you can see the ink capacity on the control panel itself, press the Home button to go to the home screen.

  1. Select the Settingsmenu, then choose Supply Status. View the balance ink capacity.After that, press the Home button again. 
  2. After you refill the ink tanks, go to the Settingsmenu on the control panel, and select Maintenance.
  3. Then, choose the Fill Inkoption to reset the ink levels on the printer.

Epson EcoTank Pro ET-5850 Factory Reset Guide

Performing a factory reset on the Epson printer changes all the printer settings to the default factory settings.

  1. Open the home screen of the control panel and navigate to the Settings
  2. Under General Settings, choose System Administration and then type the administrator password when the system prompts.
  3. Next, select the Restore Default Settingsoption, after which a list of options appears.
  4. To change all the printer settings to the default state, choose the Clear All Data and Settingsmenu and select Yes to confirm.

Fixed: Epson EcoTank Pro ET-5850 Scan to Computer not Working Issue

When you face a problem with the Epson EcoTank Pro ET-5850 setup Scan to Computer feature, then consider these solutions to fix the problem.

  1. Check the network connection of the computer and the scanner.If the computer is not in the same network as the scanner, you cannot scan to the computer.
  2. If the computer is in the offline or sleep mode, then the scanner cannot detect it, so keep the computer turned on during the scan operation.
  3. You cannot scan to a computer that has low storage memory; free up space on the computer and retry scanning.
  4. Using an outdated printer/scanner software causes such an issue, so update the software whenever required.
printer setup support