Complete Epson Stylus CX3810 Setup Guidance

  1. Set the Epson Stylus CX3810 box on the floor.
  2. Cut open the sealing tapes holding the top flaps together.
  3. Fold back the flaps.
  4. Take all the Epson printer accessories out of the box.
  5. These include the Epson printer CD, ink cartridges, power cable, and user guide.
  6. Grasp the printer carefully with both hands and take it out of the box.
  7. Place it on a table that is close to a wall socket.
  8. Peel off all the tapes from the Epson Stylus CX3810 setup
  9. Raise the CX3810 printer’s scanner assembly.
  10. Take off the tape covering the ink cartridge holder and discard it.
  11. Close the scanner assembly.
Epson Stylus CX3810 Setup

Power Connection

  1. Take the Epson power cable out of the package.
  2. Remove the twist tie and uncoil the cable.
  3. Connect it to the CX3810 printer’s Power port and the wall outlet.
  4. The Epson Stylus CX3810 setup’s Power button is located on the top-left portion section of the printer.
  5. Press it and wait until the machine initializes.
Stylus CX3810 Power Connection Guide

Install the Ink Cartridges

  1. Raise the Epson Stylus CX3810 setup’s scanner assembly until it locks into place.
  2. Access the ink cartridge slots by opening the cartridge cover.
  3. Take an Epson ink cartridge, rock it back and forth, and then unpack it.
  4. Place the Epson ink cartridge in its slot on the CX3810 printer and press it until it snaps into place.
  5. Install the rest of the Epson ink cartridges in the same way.
  6. Secure the cartridges with the cartridge cover by closing it.
  7. Close the scanner assembly as well.

Ink Charging

  1. Once the Epson Stylus CX3810 setup’s ink cartridges have been installed, and the scanner assembly has been closed, touch the button with the ink drop icon.
  2. Wait for about 2 minutes until the ink is charged.

Loading Paper

  1. Flip open the CX3810 printer’s paper support and extend it fully.
  2. Similarly, lower the output tray and extend it.
  3. Push the feeder guard away from the paper support.
  4. Move the paper guide to the left end.
  5. Set a paper stack in the XC3810 machine’s paper tray against the right edge guide.
  6. Make sure that you load the paper in the vertical orientation.
  7. Return the feeder guard to its original position. (against the paper tray)
  8. Install the CX3810 software on your computer to complete the rest of the setup.
Loading Paper in Stylus CX3810 Printer

Epson Stylus CX3810 Driver Download

The Epson Stylus CX3810 Windows 64-bit driver can be downloaded by clicking the Download button given below.

Driver Download for Epson Stylus CX3810

Epson Stylus CX3810 Manual Download

The Epson Stylus CX3810 setup abridged user guide can be downloaded by clicking the Download button given below.

Epson Stylus CX3810 Manual Download

Guide: Epson Stylus CX3810 Driver Install

  1. Double-click the CX3810 software package that you downloaded from this site.
  2. Alternatively, insert the CX3810 driver CD into your computer and launch the setup.
  3. The list of Epson tools that can be installed is displayed on the screen.
  4. Deselect the tools that you don’t need and then click the Install button.
  5. The Epson software tools are installed on your computer.
  6. The CX3810 software installer prompts you to select a connection mode.
  7. Choose Wireless and then click the Next button. Choose the setup device for the first time option.
  8. The wireless connection can be established either by tapping buttons on the Epson Stylus CX3810 setup or via a USB cable to share the computer’s connection data with the printer.
  9. Select the preferred connection method and follow the on-screen prompts to establish the connection.
  10. This completes the CX3810 driver installation.

Epson Stylus CX3810 Wireless Setup Guide

  1. Power on the Epson Stylus CX3810 printer.
  2. Make sure that your PC is connected to the wireless network to which you want the Epson Stylus CX3810 setup to be connected.
  3. Run the CX3810 software package installer on this computer.
  4. Accept the license terms and choose the Epson software packages to be installed.
  5. When prompted to choose a connection method, select the Wireless or USB mode.
  6. If you choose Wireless, you will be guided through the wireless setup by using the CX3810’s control panel.
  7. If you choose USB, the installer’s prompts help you establish the wireless connection by connecting the CX3810 printer and the computer via a USB cable.
  8. Follow these prompts to complete the CX3810 wireless setup.

Epson Stylus CX3810 Scanner Driver

The Epson Stylus CX3810 scanner driver can be downloaded from the manufacturer’s site.The CX3810 scanner driver for Windows 10 64-bit computers can be downloaded by clicking the link given below.

Win10 64-bit Scanner Driver Package(Old Version)

Scanner Driver for Epson Stylus CX3810 Setup

Win10 64-bit Scanner Driver Package(New Version)

Epson Stylus CX3810 setup’s Scanner Driver

How to Clean Epson Stylus CX3810 Printhead?

Before cleaning the Epson Stylus CX3810 setup, you need to print a nozzle check pattern to find out whether cleaning is required.

  1. Power on the CX3810 printer.
  2. Ensure that the INK LED on the printer is off. If it blinks, it means that a cartridge replacement is required.
  3. Now, after changing the ink cartridge, the Ink LED should no longer blink but remain off.
  4. Go to the computer on which the CX3810 software has been installed.
  5. Navigate to the taskbar and right-click the printer icon.
  1. Choose Nozzle Check. 
  2. The Nozzle Check window appears.
  3. Click Print.
  4. The CX3810 printer prints the nozzle check pattern.
  5. If there are dotted lines in the pattern, printhead cleaning is required.
  6. Return to the printer icon on the status bar and right-click it.
  7. Choose Head Cleaning and then click Start.
  8. Print a nozzle check pattern and check whether another printhead cleaning cycle is required.

Epson Stylus CX3810 Setup Troubleshooting Guidance

If you face a printing issue on the CX3810 printer, you can follow the guidelines given in the following topics to resolve it. Typically, users face issues such as the printer is offline, paper jam, the printer does not print, error LEDs blinking, etc.

Fixed: Epson Stylus CX3810 Offline Issue

  1. Check whether the Epson Stylus CX3810 setup is connected to the computer. 
  2. If the Epson printer is connected to the computer via a wireless network, connect a phone or smart device to the network, and check whether there is internet access.
  3. If not, restart the router, check whether there is internet access, and then find out whether the offline issue has been resolved.
  4. If the connection is via a USB cable, check the cable for damage. Replace the cable if it is damaged.
  5. Turn off the antivirus and firewall on your computer. This resolves the offline printer issue in some cases.
  6. There is a chance that the ‘Use Printer Offline’ option has been enabled.
  7. Go to Start-->Control Panel-->Hardware & Sound-->Devices & Printers-->Right-click Epson CX3810-->Select the Printer tab-->Ensure that the ‘Use Printer Offline’ option is unselected.
  8. Uninstall the CX3810 driver and restart the computer.
  9. Download and install the latest CX3810 driver on your computer from the manufacturer’s site.

Solved: Epson Stylus CX3810 Paper Jam Error

If there is a paper jam in the CX3810 printer, the paper jam red error LED flashes.

  1. When this happens, tap the CX3810 machine’s Start Color button.
  2. The jammed paper should be ejected.
  3. If not, remove it manually.
  4. Power off the CX3810 printer.
  5. Raise its scanner assembly and take the jammed paper out carefully.
  6. Take care not to pull the paper from the sheet feeder in the backward direction. Doing so could damage the sheet feeder.
  7. Lower the scanner assembly.
  8. Power on the Epson Stylus CX3810 setup and check whether the paper jam error has been cleared.
Stylus CX3810 Paper Jam Solution

Epson Stylus CX3810 not Printing Guidance

  1. Power off the CX3810 printer, the computer, and the networking devices.
  2. Check the cables connecting the printer, computer, and router.
  3. Replace the cables if they are faulty.
  4. Ensure that the CX3810 printer is set as the computer’s default printer.
  5. Go to Start --> Settings --> Printers --> Right-click Epson Stylus CX3810 --> Set as Default.
  6. Run a printhead cleaning cycle on the CX3810 printer by using the Epson printer software on your computer.
  7. Replace the Epson Stylus CX3810 setup’s ink cartridges if the old cartridges have run out of ink.

Epson Stylus CX3810 All Lights Flashing Issue

  1. You can try these solutions if all the lights on your CX3810 printer are flashing, rendering the printer unusable.
  2. Open the Epson Status Monitor on your computer and check whether the ink pad has reached the end of its service life.
  3. If the ink pad has reached the end of its service life, you need to get the pad replaced by an Epson professional.
  4. Look for paper jams. If there are any, remove them.
  5. Replace the Epson ink cartridges if they are low on ink.
  6. Power off the CX3810 printer and open the scanner assembly.
  7. Detach the power cable from the Epson Stylus CX3810 setup and the wall outlet.
  8. Clean the light sensor(white strip on the rails over which the printer’s ink cartridge carriage moves.)
  9. Close the scanner assembly and reattach the power cable.
  10. Power on the CX3810 printer and check whether the ‘all lights flashing’ issue has been resolved.

Steps: Epson Stylus CX3810 Reset

  1. Power on the Epson Stylus CX3810 printer.
  2. When the CX3810 printer is powered on, detach the power cable from its Power port.
  3. Remove the power cable from the wall outlet.
  4. After a few minutes, reattach the cable to the wall outlet and the printer.
  5. If the CX3810 machine does not get powered on by itself, press its power button and wait until it initializes.
  6. The Epson Stylus CX3810 setup is now reset.
How to Reset Epson Stylus CX3810 Printer
printer setup support