Canon Pixma IP4000 Setup Guidance

• Remove all the wrappers around the Canon Pixma IP4000 printer box.
• Open the box and take out the printer from it.
• "You" can find the printer components inside the box.
• "Printer" software installation kit, print head, ink tanks (68K Black, 3eBK Black, Magenta, Cyan), and power cable are the components that are provided in the Canon Pixma IP4000 printer carton.
• "Remove" all the protective wrappers and components from the printer.
• "Connect" the power cable to the electrical port of the printer and grounded power supply directly.
• "Power up" the Canon Pixma printer by force pressing its power button.
• "Unpack" the print head provided in the printer box.
• "Peel off" the orange-colored cap from the print head.
• "Lift" the lock lever of the print head.
• Place the print head in its holder.
• "Unpack" the ink tanks and insert them into the print head of the printer.
• Load enough sheets in the Auto Sheet Feeder of the Canon Pixma IP4000 Setup.
• Extend the cassette to its maximum position at the front of the printer and remove it.
• Take out the top cover of the printer.

• Gently slide the long edge paper guide to the left of the printer and the short guide to the front.
• Load suitable sheets in the Cassette.
• Re-fix the top cover and place the Cassette into the Canon Pixma IP4000 printer.
• Install the Canon Pixma printer software and complete the setup.

Canon Pixma IP4000 Manual Download

Use the Manual Download button to computerize the softcopy of the Canon Pixma IP4000 printer’s manual for free.

Canon Pixma IP4000 Driver Installation Guidance

• Start to install the software for the Canon Pixma IP4000 printer after downloading it.
• The procedure for installing the printer software varies based on the OS
• version of your computer or laptop.
• Make sure that you have downloaded the Canon Pixma IP4000 printer software on your computer.
• Open the printer software file and follow the guidelines to install the driver.

Solved: Canon Pixma IP4000 Printhead Error

• Make sure that the Canon Pixma IP4000 printer is powered on.
• Raise the output tray and cover at the top of the printer.
• Now the print head holder slides to the center of the printer.
• Raise the inner door and take out the tanks from the printer.
• Lift the print head lock lever of the printer.
• Take out the print head from the printer.
• Re-fix the print head into its holder.
• Also, insert the removed ink tanks.
• Close all the doors and check if the print head error is fixed.

Fixed: Canon Pixma IP4000 won't Print

• Make sure that the Canon Pixma IP4000 printer is turned on.
• Check if the ink tanks are inserted into the respective slots.
• Also, ensure that the print head is inserted into its holder properly.
• Examine if the paper tray is loaded with compatible sheets.
• Check if the print settings are configured correctly in the software of the printer.
• Relink your Canon Pixma IP4000 printer and computer.
• For detailed solutions to fix the Canon Pixma IP400 printer will not print issue, call our technical support team.

Solved: Canon Pixma IP4000 not Printing Colours

• Check if the ink tanks are inserted into the respective slots.
• Also, ensure that the cartridges are not damaged.
• If the cartridges are damaged, replace them with a new set.
• It is advisable to use genuine ink cartridges to get rid of the printing issue with the Canon Pixma IP4000 Setup.

Canon Pixma IP4000 not Printing Black

• Open the access cover of the Canon Pixma IP4000 printer.
• Remove the black ink cartridge from the Canon printer.
• Check if the cartridge is not damaged.
• If the cartridge is damaged, replace it with a new black ink cartridge.
• Make sure that the print head is working properly.
• Also, check for any damages on the print head.
• Replace the print head with a new one if it is damaged.
• Re-fix the black ink cartridge into the respective place of the printer.
• Close the access door and check if the Canon Pixma IP4000 printer not printing black issue is solved.

Solved: Canon Pixma IP4000 Orange Light Flashing Issue

• Reload the sheets in the cassette or rear tray of the Canon Pixma IP4000 printer.
• Tap the Resume or Cancel key.
• Open the output tray of the printer if it is closed.
• Check for jammed sheets in the tray of the Canon Pixma IP4000 Setup and remove them.
• Make sure that the ink tanks are installed in the respective place.
• Replace the ink absorber with a new one if it is filled.
• If you find it hard to fix the orange-colored light flashing error, reach our well-qualified technical experts.