Canon Pixma MG6620 Setup Guidance

  1. Set the Canon MG6620 box on a flat surface and cut the sealing tapes open.
  2. Fold back the printer box’s flaps.
  3. Unpack the contents such as the Canon power cable, setup CD, instruction guide, and the Pixma printer itself.
  4. Set the Canon Pixma MG6620 Setup on a level surface and peel off the orange tapes. (Keeping the printer on an uneven surface may affect its functionality)
  5. Lower the front door.
  6. Raise its control panel, remove the tapes stuck in the cartridge space below it and then close the panel.
  7. Access the MG6620 printer’s rear surface and peel off the tape stuck there.
Canon Pixma MG6620 Setup
MG6620 Printer Connection

Power Connection

  • Unwind the Canon power cable.
  • Attach it to the MG6620 printer’s rear power port and wall electrical outlet.
  • The MG6620 printer’s Power button is located beside its control panel. Press it.
  • When you see a setup message on its LCD, press OK.

Ink Tank Installation

  • Raise the MG6620 machine’s control panel and wait until the ink tank carriage stops moving.
  • Lower the paper output tray.
  • Remove the ink tanks from the package and peel off the protective films stuck to them.
  • Also, remove the orange tabs attached to the ink tanks. 
  • Install the ink tanks in their respective slots. (Refer to the color markings on the ink tanks and the slots.)
  • Ensure that all the ink tanks’ LEDs glow steadily.
  • Raise the paper output tray and lower the control panel.
  • The MG6620 printer displays a message on its control panel stating that the printhead cleaning is in progress.
  • When you see the notification prompting you to press OK to start the printhead alignment, press OK.

Loading Papers

  • Grasp the tab on the right side of the Canon Pixma MG6620 setup’s front tray and pull the feeder out.
  • Push the paper width guide all the way to the right.
  • Load a paper stack in the paper feeder such that it rests against the paper width guide.
  • Push the paper width guide slightly inward to secure the stack.
  • Push the feeder into the printer until the alignment mark on the front tray aligns with the mark on the printer.
  • Slide-out the paper output tray and raise the support.

Canon Pixma MG6620 Driver Download Guide

Canon Pixma MG6620 Driver for Windows

The MG6620 printer driver from this site for your Windows 10 computer.

Canon Pixma mg2922 Driver for Windows

Canon Pixma MG6620 Driver for MAC

The MG6620 printer driver from this page for your Mac OS Catalina v10.15 computer.

Canon Pixma MG2922 Printer Driver for Mac

Canon Pixma MG6620 Manual Download

The Canon Pixma MG6620 setup user manual for your Windows computer from this page. For Mac users, the Canon MG6620 user manual can be downloaded

User Manual for Canon Pixma MG2922 Printer

Install Canon Pixma MG6620 Driver Guide

  • Double-click the MG6620 driver that you downloaded from the manufacturer’s site.
  • Accept the MG6620 driver installer’s license agreement.
  • Click the Next button when the MG6620 driver installer dashboard appears.
  • Select the connection method from the ‘connection method’ screen.
  • Click Next.
  • Follow the MG6620 driver installer’s on-screen prompts to install the driver on your computer.
  • You will be prompted to connect the Canon MG6620 printer to a Wi-Fi network to complete the driver installation.
Install Canon MG6620 Driver

How to Change Ink Cartridge in Canon Pixma MG6620?

  1. Lower the Canon Pixma MG6620 setup’s front door.
  2. Raise the control panel and wait until the ink tank carriage stops moving.
  3. Remove the new Canon ink tank from the package.
  4. Remove the plastic film and the orange tab from the ink tank.
  1. Install this ink tank in its respective slot on the ink tank carriage.
  2. Check whether its LED glows steadily.
  3. Lower the MG6620 machine’s control panel and raise the front door.

How to Connect Canon Pixma MG6620 to Wifi?

  1. When installing the MG6620 driver, the installer prompts you to start the wireless setup.
  2. Go to the MG6620 printer’s control panel and press the Home button.
  3. Swipe across its screen and locate the WLAN icon.
  4. Tap it.
  5. Tap the Wireless LAN setup.
  6. If the MG6620 printer detects that a WPS-compatible access point is located nearby, it displays the message on the screen.
  1. When installing the MG6620 driver, the installer prompts you to start the wireless setup.
  2. Go to the Canon Pixma MG6620 setup’s control panel and press the Home button.
  3. Swipe across its screen and locate the WLAN icon.
  4. Tap it.
  5. Tap the Wireless LAN setup.
  6. If the MG6620 printer detects that a WPS-compatible access point is located nearby, it displays the message on the screen.

How to Scan on Canon MG6620?

  1. Raise the MG6620 printer’s scanner cover and place a document/photo on the platen.
  2. Lower the scanner cover.
  3. Open the IJ Scan Utility on your computer.
  4. Click the Start icon, select All Programs, 
  5. Open Canon Utilities and click IJ Scan Utility.
  6. Make sure that the MG6620 printer is selected from the ‘Product Name drop-down list.’
  7. Click the Settings button and tweak the scanning preferences.
  8. Select the OK button after setting the preferences.
  9. Click Document or Photo to begin scanning the document/photo.
Canon Pixma MG6620 Setup

How to Clean Printhead in Canon Pixma MG6620?

  1. Power on the Canon Pixma MG6620 Setup.
  2. "Load a paper stack in the MG6620 machine’s cassette and push the cassette into the printer.
  3. "Choose" the type of paper that you have loaded in the cassette.
  4. Lower the paper output tray.
  5. Tap the Home button.
  6. Select Setup(screwdriver & a pair of pliers) -->Maintenance(multi-colored ink drops)-->Cleaning-->Yes.
  7. Wait for about a minute until the printhead cleaning is completed.
  8. Select Yes when the pattern print confirmation screen appears.
  9. The nozzle check pattern is printed.
  10. "Tap" All A if the printed pattern matches the pattern on the confirmation screen.
  11. "Tap" 'Also B' if there are missing lines.
  12. The MG6620 printer begins the printhead cleaning process.

How to Clean Paper Jam Canon Pixma MG6620?

  • When there is a paper jam in the Canon Pixma MG6620 setup, a support code is displayed on the computer screen, which is accompanied by a message as well.
  • Perform the actions displayed on the screen to remove the jammed paper and press the OK button.
  • For example, the 1300 code means that the jammed paper is located in the output slot. The error code 1303 occurs when the paper is jammed while duplex printing is being performed. The 1304 error code appears when the jammed paper is torn and cannot be taken out from the paper output slot/transport unit.
  • Before attempting to remove the jammed paper, turn the printer off.
  • If you are unable to remove the jammed paper from the output slot, set the printer on its right side and open the transport unit lid. Remove the jammed paper and close the transport unit lid. Power on the MG6620 printer.
  • n case the jammed paper cannot be removed from the paper output slot or transport unit, raise the control panel and remove the jammed paper carefully. Close the control panel when the paper has been removed.

How to Reset Canon Pixma MG6620 Setup?

  • Tap the Home button on the MG6620 printer’s control panel.
  • Select 'Setup' and then the Reset setting option.
  • Tap the Reset all option to revert all the MG6620 printer settings to factory default.

Fixed: Canon Pixma MG6620 not Printing

If the MG6620 printer does not print, you can consider

  • Performing nozzle check
  • Checking whether there is sufficient ink in the ink tanks.
  • Cleaning the printhead
  • Performing deep printhead cleaning.

Canon MG6620 Error Code Solution

Solved: Canon MG6620 Error Code B203

When you see the B203 error code, you need to power off the printer and detach its power cable from the wall outlet. The Canon Pixma MG6620 setup requires service.

Solved: Canon MG6620 Error Code 1403

Error code 1403 means that the printhead might be damaged. Consider replacing the printhead or have the printer serviced.

Solved: Canon MG6620 Error Code 5B00

The 5B00 is an MG6620 printer internal error. Get in touch with the service center.

Solved: Canon MG6620 Error Code B203

B203 error code means that the MG6620 printer requires service. Power the Pixma printer off and detach the power cables before calling the service center.

Solved: Canon MG6620 Error Code 5011

If the 5011 error code(internal error) appears, power off the MG6620 printer and then power it on. If the error code persists, get in touch with the manufacturer’s service center.

Solved: Canon MG6620 Error Code 6000

The error code 6000 indicates that there is an internal error. Power off the printer and power it back on. If that does not clear the error code, get in touch with the service center.

Solved: Canon MG6620 Error Code 6502

For the error code 6502, try powering off the printer, detaching the power cord, reattaching the power cord, and powering on the Canon Pixma MG6620 setup. However, if the error code persists, have the printer serviced.

Copyright © 2020 - 2021 printer-setup.us | All Rights Reserved.

➤