Canon Pixma TS702 Setup

Unpack

1. Unbox the printer and check if the other printer accessories are present in the box.
2. Remove the packaging materials and the protective tapes from the printer.
3. Lift the printer’s top cover, then peel off the tapes from the inside of the printer and close the top cover.

Switch on the printer

1. Hook up one end of the power cord to the printer and plug the other end to an electrical socket. 
2. Now, press the power button on the control panel to switch on the printer, after which the printer display turns on.
3. Set the language using the control panel and press the OK button.

Insert ink tanks

1. Again,open the top cover, wait till the print head stops moving, then unpack the new ink tank.
2. Remove the orange film and cap from the tank, install the ink tank into the print head and gently press it such that it locks into
3. Verify if the ink indication mark appears on the display panel.
4. Similarly, install all the other ink tanks in the printer and close the top cover of the Canon Pixma TS702 setup.
5. After that, check the display panel for a message and press OK.

Load paper to the paper cassette

1. After you install the ink tanks, when the message saying to start the alignment appears on the display,  press Yes.
2. Slowly take out the paper cassette from the printer;then take off the cassette cover.
3. Move the paper guides to the paper size you are loading.
4. Neatly arrange the paper such that the print side is down, against the front paper guide in the cassette.
5. Then shift the paper guides to fit the paper size, but see that you do not squeeze the paper.
6. Replace the paper cassette cover and then insert the cassette into the printer.
7. Draw the paper output tray outwards until it stops, and see if there is any protective material, then remove it.
8. Extend the paper output support, which is below the paper cassette.
9. Check the messages on the printer’s display panel, respond in an appropriate way.

Install the printer software

1. When the physical setup is complete, proceed to install the printer software on your computer for easy functioning.

Canon Pixma TS702 Driver Download

The below steps will help you to download the printer driver online;

1. Open aweb browser on your computer and visit the official Canon support page.
2. Search for the Canon PIXMA TS702 printer model and go toits support page.
3. Click the Drivers & Downloadstab and choose the appropriate Operating System and the Language from the drop-down menu.
4. Select the driver below and click the Download

Canon Pixma TS702 Manual Download

With the below steps, you can download the softcopy of the Canon Pixma TS702 setup’s user manual.

1. After you enter the support page of the Canon printer model, go to the Manuals 
2. Choose the guide you want to download from the list of user guides and click the SELECTbutton then proceed to download.
3. The manuals are available in PDF format.

Canon Pixma TS702 Driver Installation

1. Insert the printer CD, then go to the CD drive, and open the software installer file.
2. Otherwise, download the printer driver from the official website.
3. Mount the software installer file and click the Start Setupbutton on the installation window.
4. Choose the preferred language, then read and accept the License Agreement.
5. Select the connection type and verify it.
6. After that, select the software you have to install and click Next.
7. Fol class="ulclr"low the guided instructions and complete the installation.

How to Scan on Canon Pixma TS702?

1. The Canon Pixma TS702 setup does not have a scanner glass or ADF; instead, it relies on the mobile phone camera.  
2. Install the Canon Print app on the mobile phone;when scanning, make sure the mobile and the printer are on the same network.
3. Go ahead to scan the document and send it to the printer via the app.

Canon Pixma TS702 Wireless Setup

1. Turn on the Wi-Fi router network and connect your computer to the network. 
2. Note down the Network SSID and password.
3. You can get the Canon printer software from online or use the installation CD.
4. Open the installer file and select the Start Setupbutton in the installation window.
5. Click the Nextbutton to continue with the setup process.
6. Next, choose a suitable language from the drop-down menu.
7. Read the Licence Agreement and click the Agree
8. Select Wireless as the connection type, and confirm it by clicking Yes.
9. If the wireless network name appears onthe window, select it, and enter the password.
10. In case the network name does not appear, then add the network manually using the network SSID.
11. When the connection is established, you can see the connection status on the screen.
12. Fol class="ulclr"lowing that, go on to print the test page to verify the connection.
13. Then select the software for installation and complete the wireless setup.

Resolved: Canon Pixma TS702 Offline Issue

When you are operating the printer, if the Canon Pixma TS702 setup goes offline, try out these measures to fix the problem.

1. On Windows computer, open the printer window and right-click the printer name, then see if the Use Printer Onlineis enabled or the Use Printer Offline is disabled; if not, then select it to enable it.
2. Check if the network cables and the power cable of the printer are secure at the ends.
3. Open the Print window, check if any printing job is stalled, and then remove the stopped printing job.

Fixed: Canon Pixma TS702 Setup Paper Jam Issue

Fixed: Pixma TS702 Setup won't Connect to Wifi Issue

If the printer does not connect to the Wi-Fi network, use the fol class="ulclr"lowing sol class="ulclr"utions.

1. Verify if the wireless router network is turned on, and check the service by connecting the other Wi-Fi devices to the network.
2. In case you are using theol class="ulclr"d printer driver, download the latest printer driver, and install it on the printer.
3. See if the network credentials like SSID and passwordare correct.
4. Due to incomplete wireless setup, the printer can face such an issue, therefore reinstall the driver and perform the wireless setup properly.

Fixed: Canon Pixma TS702 won't Scan Issue

1. You can scan with the mobile app and send it to the printer.
2. The mobile with the scan app and the printer should be connected to the same network.
3. Update the scan app on the mobile device and see if the app can scan.

Fixed: Canon Pixma TS702 won't Print Issue

1. Check if all the Canon Pixma TS702 setup and cable connections are correct and secure at the ends.
2. Make sure the device from which you are giving the print job is connected to the printer via a network.
3. Extend the paper output tray to the maximum and try to print again.
4. Check the ink levels in the ink tank; if it is low, then replace it with new ones.