Canon Pixma TS6320 Setup

The following procedure helps you to set up the Canon printer physically.

  1. Unbox
  2. Power connection
  3. Install ink tanks
  4. Load paper in the paper cassette
  5. Install software
  6. MAC Driver installation
Canon Pixma TS6320 Setup

Canon Pixma TS6320 Printer Unboxing

Canon TS6320 Unboxing Guide

Unbox

  1. Take the Canon Pixma TS6320 setup out of the box and check if the printer accessories such as ink tanks, power cord, Setup CD, and Manuals are present.
  2. Unpack the Canon pixma printer by removing the packaging tapes and protective materials, then open the scanning unit and also remove the packaging tapes from the inside of the printer.
  3. Lower the scanning unit after the removal.

Power connections

  1. Next, connect the power cord between the printer and an electrical wall socket.
  2. Press the power button on the operational panel to turn on the printer.
  3. After the printer turns on, use the navigation keys and the OK button to select your preferred language.

Install ink tanks

  1. Keep the scannerunit open and wait untill the print head remains stable.
  2. Remove the new ink tank from the packet and take off the tapes, film, andthe orange cap from the ink tank.
  3. See that you do not touch the red colored parts of the ink tank.
  4. Insert the ink tanksinto the print head in their respective slots one by one until they snap in a position. 
  5. After installing each ink tank, check the display for a small box above the ink color code letter.
  6. When the ink tanks installation is done, close the scanning unit.

Load paper in the paper cassette

  1. When you see the “Start alignment to improve print quality?” message on the printer’s display, choose  Yes .
  2. Draw the paper cassette out of the printer and take off the cassette cover.
  3. Move the paper guides towards the tray’sedge and place it to fit the paper size you are loading.
  4. Neatly arrange the papersand place them on the cassette against the front edge, with the print side up.
  5. Now, replace the paper cassette cover and insert the cassette into the Canon Pixma TS6320 setup.
  6. Look out for the messages on the printer display, and select the OK button to complete the process.

Install software

  1. When the printer hardware setup is over, proceed to install the printer software on the computer.
  2. You can also connect your mobile phone to the printer.

Canon TS6320 Driver Installation

Driver installation

  1. You can obtain the Canon printer driver from the Canon Pixma TS6320 setup installation CD and the official Canon website.
  2. From the browser, visit the official website and find the printer model.
  3. Now, as you enter into the support page of your printer model, navigate to the  Driver & Downloads  section, and download the driver.
  4. Open the software installer file, after which the printer installation window opens up. 
  5. Click the Next  button in the window, and when the system prompts to enter the administrator username & password, enter them to continue.
  6. Select the  Start Setup button in the window and click  Next .
  7. Read the License Agreement;after that, select the  Agree  button to accept.
  8. Choose the connection method, then select the software you want to install.
  9. Follow the steps and complete the installation.
Canon Pixma TS8220 Unboxing

Canon Pixma TS6320 Driver Download

Follow the steps to download the printer driver online.

  1. Launch the web browser on your computer and go to the official manufacturer website.
  2. Using the search bar, find the  Canon PIXMA TS6320 printer model and enter its support page.
  3. Select the  Drivers & Downloads tab, then choose the Operating System from the drop-down menu.
  4. Selectthe recommended driver package and download it to your computer.
Canon Pixma TS6320 Driver Download

Canon Pixma TS6320 Manual Download

The Canon Pixma TS6320 setup manual is available online as a downloadable pdf file. Use the following steps to download the manual.

  1. Go to the official Canon website from the web browser and open the support page of your printer model.
  2. Click the  Manuals tab, under  Guides & Manuals , a list of manuals appear on the page.
  3. Select the manual you want and click the  Download
Epson EcoTank Pro ET-5800 setup User Manual Download

Canon Pixma TS6320 Wireless Setup

  1. Enable the Wi-Fi router network and connect your computer to the network.
  2. Write down the network SSID and password.
  3. Download the software driver package on the computer or use the installation CD.
  4. Turn on the printer and hold the  Wireless connect button on the printer’s operational panel.
  5. Release the button when the “ Processing ” message appears on the display panel.
  6. Next, open the installer file on the computer and start to run the installation.
  7. After the Canon installation window shows up, click  Next .
  8. When the system asks for the Administrator Username and password, enter them and click  Install Helper .
  9. Select  Start Setup , go on to read the License Agreement,and accept it.
  10. Choose the Wireless connection method and click Yes .
  11. When the network SSID appears on the screen, confirm it, and enter the password.
  12. When the connection is complete, click the  Add Printer button and continue to add the printer to the system.
  13. Finish the wireless setup.In case you have to install any other software, you can go online by clicking the  Continue online .

How to Scan on Canon Pixma TS6320 Setup?

  1. The computer and the scanner should be on the same network.
  2. Download the  Canon IJ Scan Utility on your computer from the official support page of the printer model.
  3. In the  Drivers & Downloads section, download MP Drivers, which includes the IJ Scan Utility.
  4. Open IJ Scan Utility under Canon Utilities, and then make the necessary scan settings in the  Canon IJ Scan Utility
  5. After the settings are done, click OK  to save the changes. 
  6. Select the printer model from the drop-down menuand choose the scan mode from the given options and start scanning.

Canon Pixma TS6320 Print Setup

  1. After feeding paper and checking the ink level, connect the printer and the computer via the router network.
  2. Open the document or image you are about to print on the computer and click the  Print
  3. After that, the  Printing Preferences window shows up. In the  Quick Setup  panel, set the required print settings.
  4. Click OK  to complete the print setup.

Canon Pixma TS6320 Print from Phone

For Android & iOS mobile devices:

  1. Connect the printer and the mobile device to the same network.
  2. Download and install the Canon Print app from the Google Play Store(Android) or App Store(iOS).
  3. From the app, open the email or webpage, then select the  Print menu and choose the printer model name.

Canon Pixma TS6320 Airprint Setup

Apple AirPrint is a technology that enables you to print from the Apple devices. Use the following steps to print using the AirPrint.

  1. See that the Canon Pixma TS6320 setup and your Apple mobile are connected to the same Wi-Fi network.
  2. Open the file you want to print; after that, tap the share icon and then the print icon.
  3. Choose the printer model and select the number of copies.
  4. Finally, tap the  Print menu at the top right corner of the screen.

Canon Pixma TS6320 Setup Troubleshooting Guidance

When the printer operations interrupt or get blocked, it signifies that the printer encounters some problems. If an error message appears on the printer’s display, try to resolve it by following the user manuals and online troubleshooting solutions. To easily solve the printer issues, contact our support team.

Fixed: Canon Pixma TS6320 Offline

During the printer functioning, if the printer goes offline, then consider the below solutions.

  1. See if the  Auto Power Off mode is enabled, and turn it off in the Canon Pixma TS6320 setup Assistant Tool on the computer.
  2. On a Windows computer, open the  Devices and Printers window and right-click the printer name. Verify if the  Use Printer Offline  is disabled or  Use Printer Online  is enabled.
  3. Check the wireless network connection status on the printer, and if itis a wired network setup, then verify if the cables are secure at the ends.

Canon Pixma TS6320 Paper Jam Solution

Paper Jam Inside the Printer:

Follow the steps to clear the paper jam from inside the printer.

  1. Turn off the printer and open the scanner unit.
  2. Check for jammed paper inside.
  3. Move the print head either to the left or the right end.
  4. Hold the jammed paper with both the hands and gently take it out without tearing.
  5. Close the scanner unit.

Paper Jam in the Rear Side:

  1. Check whether the printer is turned off.
  2. Open the rear tray cover and then remove the rear cover from the printer.
  3. Locate and remove the jammed paper.
  4. Place the rear cover back into the printer and close the rear tray cover.  

Canon Pixma TS6320 won’t Print Solution

  1. Look if the printer’s power cable is properly plugged into the socket.
  2. Make sure that the printer and the computer are connectedby checking all the network and USB connections.
  3. If anincorrect printer driver has been installed, then the printer does not print. Reinstall the proper printer driver version on the computer and perform the setup.

Steps: Canon Pixma TS6320 Reset

If you want to change the entire printer settings back to the factory default settings, reset the Canon Pixma TS6320 setup by following the below steps.

  1. On the operational panel, press OK to open the  Settings
  2. Select the  Device settings menu; following that, choose  Reset settings .
  3. Now, select the  Reset All option and choose  Yes  to confirm the reset action.