CANON PIXMA TS202 SETUP

The Canon Pixma TS202 Setup Inkjet printer does a wonderful print job at a good print speed. It can print at a maximum resolution of 4800 * 1200 dpi.

CANON PIXMA TS202 SETUP

To perform the initial hardware Canon Pixma TS202 Setup of the printer, carry out the quick steps mentioned here.

  1. Check for the essential components that are included in the box.
  2. Remove the tapes as well as the protective materials from the inside and the outside of the Canon Pixma TS202 printer.
  3. Plug the power cable into the Canon printer’s rear port and the power source and turn it on.
  4. Unpack the black FINE cartridge and insert it into the cartridge slot. Repeat the same to install the color FINE cartridge.
  5. Load enough plain paper into the paper cassette of the Canon Pixma TS202 printer.
  6. Download and install the Canon printer driver on your computer.

CANON PIXMA TS202 SETUP MAC

  1. Download the setup file of the Canon Pixma TS202 printer on your Mac computer and double-click it.
  2. Once the installation wizard starts, click the Next button at the bottom-right end of the screen.
  3. Enter the Mac administrator name in the Password field and click Install Helper.
  4. Click the Useful Software option in the Start Setup window.
  5. Choose your country from the ‘Select your country or place of residence’ drop-down menu.
  6. Accept the terms and conditions of Canon by clicking the Yes button in the License Agreement window.
  7. Select ‘Do not agree’ or ‘Agree’ in the Extended Survey Program window.
  8. Select the checkbox beside the software that you want to install and click Next.
  9. Select the Create shortcut or Do not create shortcut option, and click Next -> Exit.

CANON PIXMA TS202 DRIVER DOWNLOAD

Driver for  Printer
  1. Download the driver of the Canon Pixma TS202 printer by clicking the Driver Download button available on this web page.
  2. Alternatively, you can download the printer driver from the manufacturer website.
  3. To do this, visit the official Canon web page from a web browser.
  4. Search for the Canon Pixma TS202 Setup printer and click the Drivers & Downloads tab.
  5. The computer’s OS will be detected automatically. If you need to change it, choose the computer’s OS from the Operating System drop-down menu.
  6. Navigate to Recommended Driver(s) section. Click Select and then click Download next to Full Driver & Software.

CANON PIXMA TS202 MANUAL DOWNLOAD

User Manual for Canon Pixma TS202 Setup

To download a soft copy of the Canon Pixma TS202 printer manual from the manufacturer website, proceed with the following steps.

  1. Access the official Canon web page and type your printer name in the search bar.
  2. When you see the next web page on the screen, click the Manuals tab and go to the Recommended Manual(s) section.
  3. Click Select -> View next to User Manual. After you click the Download icon, the soft copy of the printer manual will be downloaded saved in the Downloads location.
  4. Alternatively, click the Manual Download button provided below to download the Canon printer’s soft copy manual.

CANON PIXMA TS202 DRIVER INSTALLATION

  1. Turn on the Canon Pixma TS202 printer.
  2. Insert the Setup CD-ROM into the Windows computer’s CD drive.
  3. The installation wizard starts automatically.
  4. Note: You can also download the setup file of the printer from the official Canon website.
  5. Click Start Setup, choose your region of residence from the Select Country or Region drop-down menu, and select the Next option.
  6. Click Yes in the License Agreement window to accept the terms and conditions of the Canon software.
  7. Select either the ‘Do not agree’ or ‘Agree’ option in the Extended Survey Program window.
  1. When you see the Firewall Settings window, select the checkbox next to the Deactivate the block option and click Next.
  2. Once the Printer Connection window opens, use a USB cable to establish a connection between the Canon Pixma TS202 printer and the Windows computer.
  3. Click the Next option thrice.
  4. Select the additional software that you need to install and click Next -> Skip or Register Now.
  5. Click the Exit button to close the Canon Pixma TS202 Setup and installation wizard.

HOW TO CHANGE INK CARTRIDGE CANON PIXMA TS202

  1. Make sure the Canon Pixma TS202 printer is turned on.
  2. Lower the front cover of the printer.
  3. Remove the used or empty FINE cartridge from the printer.
  4. Take a new FINE cartridge out from the package.
  5. Remove the protective tape from it.
  1. Push and insert the new unpacked FINE cartridge into the Canon Pixma TS202 printer.
  2. You will hear a locking sound only if the FINE cartridge is installed correctly in its slot.
  3. If you need to replace the other FINE cartridge, repeat the procedure.
  4. Once done, close the Canon Pixma TS202 Setup printer’s front cover.

CANON PIXMA TS202 TROUBLESHOOTING

Most of the commonly occurring problems on the Canon Pixma TS202 printer are paper jams and offline. The troubleshooting instructions to resolve these problems are mentioned below. Resetting the printer might fix some of the problems, but it is advised to perform it only if all the other troubleshooting methods fail for a particular problem. If you need technical assistance in resolving the Canon Pixma TS202 Setup printer, contact our support members by clicking the Call button available on this web page.

CANON PIXMA TS202 PAPER JAM ERROR

Jammed paper in the rear tray

Hold the jammed paper tightly with both your hands and pull it out gently either from the rear tray or paper output slot.

Jammed paper inside the printer

  1. Turn off the Canon Pixma TS202 printer and remove the power cable from it.
  2. Open the printer’s front cover.
  3. If the jammed paper is present under the FINE cartridge holder, slide the holder left or right and remove the jammed paper.
  4. Note: Pull out the paper slowly without any tear from the Canon Pixma TS202 printer.

CANON PIXMA TS202 RESET

  1. With the Canon Pixma TS202 printer turned on, hold the Resume button and release it after the Alarm LED blinks 13 times.
  2. This will reset all the settings to factory defaults.
  3. After resetting, you have to set up the Canon printer settings again.

CANON PIXMA TS202 OFFLINE

  1. Check if you have installed the correct Canon Pixma TS202 printer driver on your computer.
  2. Also, check if the USB cable is connected firmly between the printer and the computer.
  3. Turn off the Canon printer. After a minute, turn it on again.
  4. If the problem persists, set the Canon Pixma TS202 printer to online by performing the steps given here.

Step 1

  1. Windows 10 - Choose the Settings option from the Start menu and click the Devices option.
  2. Windows 8 - Go to Settings -> Control Panel -> Hardware and Sound -> Devices and Printers.
  3. Windows 7 - Choose the Devices and Printers option from the Start menu.
  4. Windows Vista - Go to the Start menu, choose the Control Panel option, and click Hardware and Sound followed by Printers.
  5. Windows XP - After you select the Control Panel option from the Start menu, click the Printers and Other Hardware option followed by the Printers and Faxes option.

Step 2

  1. Right-click the Canon Pixma TS202 printer icon and select the Use Printer Online option.
  2. If needed, set the Canon Pixma TS202 Setup printer as a default one.
printer setup support