CANON PIXMA TR7520 TROUBLESHOOTING STEPS

Some of the commonly occurring Canon Pixma TR7520 printer problems and some Canon Pixma TR7520 troubleshooting steps to resolve them are provided on this page. You can even get help from our technical experts by clicking the Call button, if at any point you feel you require assistance.

CANON PIXMA TR7520 PRINTER OFFLINE

  1. Make sure you have chosen the Canon Pixma TR7520 printer for printing.
  2. Turn off the printer, leave it for a few seconds, and turn on the printer.
  3. On your Windows 10 computer, go to the Start menu and click the Settings option followed by the Select Devices option.
  4. Right-click the printer icon and click the Use Printer Online option.
Canon Pixma TR7520 troubleshooting

CANON PIXMA TR7520 PAPER JAM

Jammed paper in the rear tray

  1. Pull out the paper that is jammed in the paper output slot or rear tray.
  2. Reload a plain paper, resume printing, and check if the issue has been resolved if not use our Canon Pixma TR7520 troubleshooting steps.

Jammed paper in the cassette

  1. Hold the jammed paper gently and pull it out from the cassette.
  2. Take out the cassette cover, press the down lock, and load a paper in the cassette.

Jammed paper inside the printer

  1. Turn off the Canon Pixma TR7520 printer.
  2. Raise the scanning unit/cover of the printer.
  3. Move the print head holder and remove the jammed paper without any tear.
  4. Make sure to clear any torn pieces of paper from the scanner area.
  5. Close the printer’s scanning unit/cover properly.

CANON PIXMA TR7520 NOT PRINTING

  1. Make sure the printer’s power cord is properly plugged into an electrical outlet.
  2. Check if the Canon Pixma TR7520 printer is turned on.
  3. If you have been using the USB cable for connection, connect it directly between the printer and your computer without a USB hub.
  4. There is also a chance that the problem might be with the USB cable. In such a case, replace the damaged cable with a new one.
  5. The paper that you have placed in the rear tray or cassette should match with the paper setting.
  6. Clear the unnecessary print jobs.
  7. Set your printer as a default one.
  8. The print speed might be slow if you are printing large data.
  9. Restart your computer if you are printing from it.

CANON PIXMA TR7520 WON’T CONNECT TO WIFI

  1. Make sure the router is placed nearer to the Canon Pixma TR7520 printer.
  2. There should be no obstacles between them. A device like a microwave oven emits radio waves that might conflict with the wireless signal. Place these types of devices far from the router to avoid interference.
  3. Customize the wireless router settings to use the 2.4 GHz bandwidth.
  4. You have to provide the correct network information for establishing a wireless connection.

CANON PIXMA TR7520 WON’T SCAN

  1. Make sure the Canon Pixma TR7520 printer is turned on.
  2. Try to connect the USB cable to a different USB port on your computer.
  3. If you are using a USB hub, disconnect it and establish a direct connection between the Canon printer and the computer using a USB cable.
  4. The printer driver might have been installed incorrectly. Uninstall the current MP driver and reinstall it using Canon Pixma TR7520 troubleshooting steps.
  5. Lastly, restart the computer.

CANON PIXMA TR7520 WON’T CONNECT TO COMPUTER

  1. Remove the USB cable from the Canon Pixma TR7520 printer and your computer.
  2. Check if the USB cable is not damaged. Get a new one for the connection.
  3. Also, try to connect the USB cable to a different USB port on the computer.
  4. The USB cable 's length must not be longer than 10 feet (3 meters).
  5. Do not use any intermediates like a USB hub.
  6. Check if the computer OS supports the Hi-Speed USB connection. In such cases, install the most recent update for the computer.
  7. Make sure you have the right driver installed.
  8. Restart the printer and computer, and re-establish the connection between them using the Canon Pixma TR7520 troubleshooting steps, 

CANON PIXMA TR7520 FACTORY RESET

  1. Select the Setup icon on the Canon Pixma TR7520 printer’s control panel.
  2. Select Settings -> Device Settings -> Reset Settings.
  3. The following options will be displayed on the printer’s display panel.
  4. Web service setup only
  5. LAN settings only
  6. Telephone number only
  7. Settings only
  8. Device info sending settings only
  9. FAX settings only
  10. Reset all
  11. To reset all your printer settings, choose the Reset All option.
  12. Select the OK option followed by the Yes option.
  13. This will restore all the printer settings to the factor defaults.

CANON PIXMA TR7520 ERROR CODE 6004

  1. Turn off the Canon Pixma TR7520 printer and unplug the power cable from it.
  2. Open the printer’s scanning unit/cover.
  3. If you see any scraps of paper or other foreign material in the scanner area, remove them.
  4. Lower the printer’s scanning unit/cover.
  5. Plug the power cord into the printer’s rear port and then power up the printer. The error should have been cleared by now once you uses the Canon Pixma TR7520 troubleshooting steps.

CANON PIXMA TR7520 ERROR CODE 1240

  1. The error code appears when the operation panel is kept open while you attempt to print a document,
  2. Open the Canon Pixma TR7520 printer’s operation panel.
  3. Pull the paper output tray as well as the paper output support out of the printer.
  4. After you open the output tray extension, select the OK option on the printer’s control panel.
  5. This will resume the paused print job.
  6. To cancel the print job, select the Stop option.

CANON PIXMA TR7520 PRINTER IN ERROR STATE

Printer connection

  1. Make sure the connection between the Canon Pixma TR7520 printer and your computer is secure at both ends.
  2. If needed, re-establish the connection between them.
  3. Use a new USB cable if it is damaged.
  4. Restarting your printer and computer
  5. Turn off the printer and turn it back on after one minute. Restart the computer as well.
  6. Printer driver
  7. Uninstall the current printer driver from the computer.
  8. Download the most recent version of the printer driver from the official Canon website.
  9. Locate the downloaded file, double-click it, and continue with the on-screen prompts.
  10. Once done with the installation, exit the wizard.
  11. Restart both the printer and the computer.
  12. Check if the error code has been resolved.
  13. If it persists, click the Call button, and our technical experts assist you in resolving the ‘Canon printer in error state’ problem using the Canon Pixma TR7520 troubleshooting steps.
printer setup support