How To Perform The Canon Pixma TR7020 Setup

Canon PIXMA TR7020, the all-new smart all-in-one printer, endeavors to get hold of the chore printing jobs at home. The machine comes with a seamless connectivity option, which allows you to connect with your smartphones or tablets over Wi-Fi and Bluetooth.  To perform the Canon Pixma TR7020 setup, make use of these steps.

Unwrap The Printer

Unpack the printer and find the following components inside the package:

  1. Power cord
  2. Safety and important information
  3. Getting started manual
  4. FINE cartridges (color and black)
  5. Discard all the protective tapes and tags from the printer.
  6. Lift the scanner unit, remove the orange tape and other protective materials, and lower the scanner unit.

Connect The Printer

  1. Unpack the power cord, then connect it to your printer and the main power source.
  2. Press the power button on your printer and turn it on.
  3. Use the directional buttons to set your preferred language. Ensure to save the details entered.

Ink Installation

  1. Open the scanning unit to install the FINE cartridges.
  2. Grasp and open the cartridge locking cover on the right side.
  3. Unpack the FINE cartridge that came along with the package.
  4. Hold the cartridge by its side and remove the protective tapes from it.
  5. Insert the FINE cartridge into its slot and press it until you hear it click.
  6. Repeat the same step to install the color FINE cartridge on your printer.
  7. Finish installing and close the cartridge locking cover followed by the scanning unit.
  8. Go to the printer's control panel and follow the on-screen instructions to complete the ink setup.

Paper Installation

  1. You may now see the 'Start alignment to improve print quality?' message on the printer's control panel. Select YES and proceed to install paper.
  2. Remove the paper cassette and slide the edge guides to the extreme.
  3. Take out a stack of paper and load it on the paper cassette.
  4. Now, slide the paper guides towards the paper.
  5. Place the paper cassette into the printer and pull out the output tray.
  6. Go to the control panel and perform the on-screen instructions to complete the paper setup.

Software Setup

  1. Visit Canon's official page to install the printer software for your printer.
  2. Follow the instructions and complete the Canon PIXMA TR7020 printer setup.

Canon PIXMA TR7020 Driver 

Canon Pixma TR7020 setup for driver download - Our support page provides an easy way to download and install the printer driver for your Canon PIXMA TR7020 printer. We have provided a driver downloading option that is available for both Windows and Mac. Find and select the Driver Download button you see on this page. Once you click the button, the printer driver for your computer will be downloaded.

Canon PIXMA TR7020 Driver Download Windows

  • You can download the printer driver for the Canon PIXMA TR7020 printer from our support page. But if you wish to download it from the official site, then keep reading the page.
  • On your computer, go to a web browser and navigate to your Canon printer’s official page.
  • Click the Drivers & Downloads tab.
  • Select your Windows OS version. Then go to the Drivers tab.
  • Choose the printer driver you want to download and click on the Download button.
Driver for Canon Pixma 8320 Printer

Canon PIXMA TR7020 Driver Download Mac

  • Click on the Driver Download button provided on this page to download the printer driver for your Canon PIXMA TR7020 printer.
  • Otherwise, visit your printer’s official support page and download the printer driver from the Drivers & Downloads section.
Driver for Canon Pixma 8320 Printer

Canon PIXMA TR7020 Driver Install

  • Complete the driver downloading process by following the steps mentioned on this page.
  • Now extract the downloaded file by double-clicking on it.
  • Agree to terms and conditions to begin the installation.
  • Carry out the on-screen instructions and complete the installation.

Canon PIXMA TR7020 Wireless Setup

Follow the simple steps below to perform the Canon Pixma TR7020 setup for wireless connection.

  1. Keep your printer and computer turned on.
  2. Run the printer software on your computer.
  3. Select Wireless on the select your connection type screen when you're prompted.
  4. Now, on your printer's control panel, select Device Settings > LAN settings > Wireless Direct > Advanced mode > Next, followed by the ON option.
  5. The wireless direct is enabled now on your printer.
  6. Now, connect your computer to the printer’s wireless network.
Canon Pixma TS8320 Offline Guide

Canon PIXMA TR7020 Print Setup

  1. Check whether you've loaded enough paper on your printer and make sure you've connected your printer to the computer.
  2. Launch the document or photo you want to print on your computer.
  3. Press Control and P key simultaneously. The print dialog box will appear on your screen.
  4. Modify the settings as per your preferences and click Print.
Canon Pixma TS8320 Offline Guide

Canon PIXMA TR7020 Copy Setup

  1. Make sure that your Canon printer is turned on and you've loaded enough paper on your printer.
  2. Next, load the original document in the ADF or on the platen.
  3. Confirm the page size, color mode, and you can also set the number of copies on the printer's control panel.
  4. Configure the copy settings and select Start.
  5. Your Canon PIXMA TR7020 printer will begin to copy.

Canon PIXMA TR7020 Scan Setup

  1. Visit the Canon official page to download the IJ Scanner Utility.
  2. Choose your printer model from the drop-list and click on the Download button.
  3. Double-click on the downloaded file folders and install the application on your computer.
  4. Connect your printer to the computer.
  5. Place the original on the scanner glass or + +.+. in ADF.
  6. Start IJ Scan Utility and click Auto.
  7. Modify the scan settings as per your preference and select Scan.
  8. Your Canon PIXMA TR7020 printer will now begin to scan.

Canon PIXMA TR7020 Troubleshooting

Most of the Canon printer's issues are well-known. Always identify the cause of the error and rectify the problem, which will lead you to resolve the issue efficiently. You can instantly solve the standard errors when performing the Canon Pixma TR7020 setup by following the quick steps provided on this page. If you're stuck in between, then contact our technical team for assistance. Click on the Call button given on this page to talk to our support team. 

Canon PIXMA TR7020 Photo Quality Issues

  1. Check whether you've loaded enough photo paper on your printer. Otherwise, reload them properly.
  2. Remove the cartridge from your printer, clean the cartridge slot, and reinstall it.
  3. Check for any print head nozzle clog on your printer. If there is any, then perform Print Head Deep Cleaning and clear the issue.
  4. Inappropriate paper thickness, unauthorized paper, and low-quality ink can give rise to such issues. Resolve all these issues and try to print from your Canon PIXMA TR7020 printer.

Canon PIXMA TR7020 Not Printing

  1. Check the connection between your Canon printer & computer and ensure network connectivity.
  2. Ensure to turn on your printer.
  3. If your printer is in sleep mode, bring it back to working condition and then try to print.
  4. Check for any error messages or alerts on the printer's control panel. If there is any, follow the on-screen instructions and resolve the errors or warnings on your printer.
  5. Check for any paper jams or torn paper on the printer. In such a case, remove the damaged paper, then reload the bundle and try to print. If you need remote assistance to perform the Canon Pixma TR7020 setup, call us.
printer setup support