HOW TO PERFORM THE CANON PIXMA TR4527 SETUP?

Canon Pixma TR4527 Setup

Canon Pixma TR4527 is a wireless photo color printer with additional features for faxing, scanning, and copying. The compact printer produces one of the best print outputs with 4800 x 1200 dpi. The printer can print at a rate of 4.4 pages per minute for color prints and 8.8 ppm for black prints. The Canon Pixma TR4527 Setup also supports additional features like AirPrint to make printing easier.

Contents in the box:

  1. The Canon Pixma TR4527 printer
  2. The Installation CD
  1. Sample paper
  2. PG-243, CL-244 Ink cartridges
  1. Power cord
  2. Telephone cord

HARDWARE SETUP:

  1. Unpack the Canon Pixma TR4527 printer from the carton.
  2. Place the printer away from direct sunlight and preferably closer to the computer and the wireless router.
  3. Remove the protective tapes surrounding the Pixma printer and discard them.
  4. Open the Canon printer's front access door and remove the orange material present inside and also the protective packaging.
  5. Remove the power cord from the sealed packaging, connect it to the printer and the power source. Turn on the Canon Pixma TR4527 Setup.
  6. Choose the language and press the OK button.
  1. Open the front door and the cartridge access door. Wait for the print head to come to its optimal position.
  2. Unpack the ink cartridges from the cover.
  3. Gently place the color ink cartridge into the slot and push it until it snaps into place (repeat the same step for the black ink cartridge), and close the cartridge access door.
  4. Place a stack of paper into the input tray and adjust the paper guides to hold the stack firmly.

Now it's time to conclude the Canon Pixma TR4527 setup process.

SOFTWARE SETUP:

  1. Place the installation CD into the CD/DVD drive of your computer.
  2. For computers without the CD/DVD drive, download the printer software from this page or the official Canon support page.
  3. Once the printer driver download is complete, run the setup file for installation.
  1. Click the Get Started button and follow the prompts on the screen.
  2. When the connection method screen appears, select the type of connection you want for the Canon Pixma TR4527 Setup and complete the software setup.

CANON PIXMA TR4527 DRIVER

If you want to use the Canon Pixma TR4527 printer from your computer, you need to have the printer driver downloaded and installed. You can download the printer driver either with the installation CD (provided with the printer), from this support page, or the official Canon support page.

CANON PIXMA TR4527 DRIVER DOWNLOAD WINDOWS

  1. On this very page, click the Driver Download button for Windows.
  2. The next moment, the printer driver will be downloaded onto your Windows computer.
  3. If you wish to download the printer driver from the official Canon support page, you can do so.
  4. Open the support page for Canon Pixma TR4527 Setup.
  5. Click the Drivers & Downloads tab.
  1. In the Drivers & Download section, click the Operating System drop-down list and select Windows. Choose the OS version as well.
  2. Click the Language drop-down list and select English.
  3. Click the Drivers tab.
  4. Select the TR4500 series Full Driver & Software Package (Windows) option and click the DOWNLOAD button.
Driver For  Printer

CANON PIXMA TR4527 DRIVER DOWNLOAD MAC

  1. Locate and click the Driver Download button for Mac on this support page.
  2. Your printer driver will be downloaded the very next second.
  3. An alternative way to download the printer driver for Mac is from the official Canon support page.
  4. Open the Canon Pixma TR4527 printer support page.
  1. Click the Drivers & Downloads tab.
  2. Select the Mac OS option from the Operating System drop-down list and choose the language of your choice. Also, select the OS version.
  3. Click the Select button for the TR4500 series Full Driver & Software Package (Mac) option and click DOWNLOAD.
Driver for  Printer
`

CANON PIXMA TR4527 DRIVER INSTALL

  1. Once the driver download is complete, you can proceed with the installation.
  2. Double-click the driver file and wait for the installer to open.
  1. Follow the commands on the screen and wait for the connection screen to appear.
  2. Select the type of connection you want for the Canon Pixma TR4527 Setup and complete the driver installation.

CANON PIXMA TR4527 WIRELESS SETUP

Easy Wireless Connect method:

Canon Pixma TR4527 Wireless Setup
  1. Make sure that the Canon Pixma TR4527 printer is turned on.
  2. Now, press and hold the Wireless/Menu button for about 3 seconds.
  3. The display will show the message, Follow the instructions.
  4. Open the printer driver you have downloaded.
  1. Follow the on-screen commands until you see the connection screen.
  2. Once the screen appears, you will see the printer serial number and your wireless network.
  3. Click the Yes button.
  4. You will now see the Setting Up message.

Once the wireless connection is set up, you will see a green check icon.

CANON PIXMA TR4527 PRINT SETUP

  1. Open the document in the print-supported software on your computer.
  2. Click File -> Print.
  3. Select the Canon Pixma TR4527 printer.
  1. Click Printer Properties and make changes based on your print requirements.
  2. Click the Page Setup tab and select the layout, orientation, etc.
  3. Click the Apply button and proceed with your printing.

CANON PIXMA TR4527 AIRPRINT

AirPrint is a mobile printing feature. It strictly supports only iOS devices (iPhone, iPad, and iPod Touch) and Mac devices. Please ensure that the iOS device and the printer are connected to the same wireless network because that's how AirPrint works.

  1. Open the document on your iOS device.
  2. Tap the Share icon and select Print.
  3. Select the Canon Pixma TR4527 printer.
  1. Tap the + icon to increase the number of copies.
  2. Press the Print button at the top-right corner of the iOS device.
  3. Install Canon iPrint Inkjet App on your mobile to printer wirelessly.

CANON PIXMA TR4527 COPY SETUP

  1. Open the document cover and then place the original on the scanner glass.
  2. Press the Copy button on the Canon printer control panel.
  1. Confirm the page settings you have set on the printer.
  2. To start copying, press either the Black button or the Copy button.

CANON PIXMA TR4527 SCAN SETUP

The simplest way to scan a document is with the help of the Canon IJ Scan utility (download from the official Canon support page).

Canon Pixma TR4527 Scan Setup
  1. Once the download is complete, open the utility.
  2. Place the document you wish to scan on the scanner glass or in the ADF.
  3. Click the Product Name drop-down list and select the Canon Pixma TR4527 printer.
  1. Select the Auto option in the utility.
  2. The scanning will begin.

CANON PIXMA TR4527 TROUBLESHOOTING

Like any other printer, the Canon Pixma TR4527 printer might go through some issues of its own. On this page, we have mentioned some issues you might face with the Canon Pixma TR4527 Setup. The steps to troubleshoot the problems are also described.

CANON PIXMA TR4527 PRINTER OFFLINE

The Canon Pixma TR4527 printer going offline is not new. Printers tend to go offline if they are idle for too long or they have some internal issues. Here are the two best methods that can resolve the offline problem.

METHOD 1: DISABLE THE FIREWALL

  1. Open the Control Panel on your computer.
  2. Select the Programs option and click the Uninstall a program button.
  3. The window will now open a list of applications.
  4. Select the antivirus/firewall application and click the Uninstall button.

METHOD 2: DISABLE THE USE PRINTER OFFLINE OPTION

  1. Open Devices and Printers (Control Panel).
  2. Do a right-click on the Canon Pixma printer.
  3. Select the option, See what's printing?
  4. Click the Printer tab.
  5. Deselect the checkbox next to the Use Printer Offline option.

CANON PIXMA TR4527 NOT PRINTING

  1. Check if the Canon Pixma TR4527 printer is turned on.
  2. If not, check if the power source is proper in the location where the printer is placed and then turn it on.
  3. If you have a wired setup, check if the USB cable is properly connected to the printer and the computer.
  1. Replace the USB cable if it's damaged in any way.
  2. Ensure that you have the right set of media loaded into the paper tray to match the print settings.
  3. Delete the pending print jobs in the queue to resolve the not printing error.

CANON PIXMA TR4527 PRINTHEAD CLEANING

Canon Pixma TR4527 Printhead Cleaning
  1. Make sure that the Canon Pixma TR4527 printer is turned on.
  2. Press the Setup button on the printer control panel.
  3. Use the navigation buttons and select the Maintenance option; press the OK button.
  1. Now, select the Cleaning option and press OK.
  2. For deep cleaning:
  3. Select the Deep Cleaning option and press the OK button.
  4. The print head cleaning will start now. The process will take about a minute or two to complete.

Testing the wireless connection:

If you are still have queries on Canon Pixma TR4527 Setup, feel free to call us.

printer setup support