Unpack

1. Unbox the printer and checkif the other printer accessories are present in the box.
2. Now, remove all the packaging tapes and protective materials from the printer.
3. Open the scanner unit, then take off the protective materials from inside and lower the scanner unit.  

Power connection

1. Use the power cord provided with the printer to connect the printer and the wall socket.
2. After that, press the power button on the operational panel of the printer.
3. When the printer display panel turns on, go on to select the language of your choice on the operational panel.

Load paper

1. Open the printer's front cover and the paper output cover of the printer, and then draw the paper cassette outwards.
2. Adjust the paper guides to the edge of the cassette and arrange the paper in the cassette.
3. Keep the printing side of the paper should face down, and the paper level below the maximum level indicator.
4. Slide the paper guides to the edges of the paper and check if it is not too tight; or else, the paper gets folded or crippled.
5. Following that, close the front cover and set the paper settings on the operational panel.
6. Follow these steps we can execute the Canon Pixma Tr4520 Setup.

Install ink cartridges

1. Open the printer's front cover and then unfold the paper output cover.
2. Wait until the cartridge holder stops at a position.
3. Unpack the ink cartridge and peel off the protective tapescovering the metal contacts.
4. Hold the cartridge by its side and see that you do not touch the contacts.
5. Insert the ink cartridge in a slightly tilted angle into the corresponding slot inside the printer.
6. When the cartridge snaps into position, then it is successfully installed.
7. Install the other ink cartridge in the same way and close the paper output cover, then the front cover.

Software Installation

1. When the hardware setup of the printer is done, proceed to install the printer software and perform the network setup.

canon pixma tr4520 driver install

1. If you do not have the software installation CD, then download the printer driver online.You can click the Driver Download button on this page.
2. Insert the Setup CD into the computer and open the CD drive on the system.
3. Mount the software installer file in the driver package, after which the Canon printer installation window opens up.
4. Click the Start Setup buttonand then confirm the security settings of the system by selecting Next.
5. Choose the Country or Region.Following that, read the License Agreement and accept the terms & policies.
6. The wired or wireless network connection method of the printer appears in the window.
7. Follow the guided instructions, and finally,select the software to install and click Next.
8. After the installation is complete, close the setup window.

how to change ink cartridge on canon pixma tr4520

When the ink cartridge expires or damages, you have to replace the ink cartridge in the printer. Follow the below steps to change the ink cartridge printer the Canon Pixma Tr4520 Setup.

Ink cartridge replacement:

1. Purchase the original Canon ink cartridge for the Canon printer model. 
2. Switch on the Canon printer and open the front cover of the printer.
3. Unfold the paper output tray cover.Now, the cartridge holder moves to the original position.
4. Wait until the cartridge holder becomes static, then press down the ink cartridge, which you are replacing to unlock it from the slot and take it out. 
5. After the removal, unpack the new cartridge that you bought and take off the films on the cartridge.
6. Install the ink cartridge in the printer's slot following the steps mentioned in the setup procedure.

canon pixma tr4520 wireless setup

Printer's wireless setup:

1. Turn on the Wi-Fi router network and connect your computer to it.
2. Note down the wireless network name and password for connection purposes.
3. Switch on the printer, later hold the Wireless connect button on the operational panel for three seconds.
4. When the display panel shows the instructions, start following the process.
5. Open the downloaded printer software installer or install the driver from usingthe CD drive on the computer.
6. In the printer software installation window, click Start Setupand then go on to select the Region.
7. Read and agree to the License Agreement.
8. Now, select wireless network connection as the connection method, after which the printer software scans for the available wireless network.
9. When the network name appears in the window, enter the network password to establish the network connection.
10. After the connection is set up, perform a test print to verify the wireless network connection.
11. Select the printer model as the default printer by clicking the checkbox beside Set as default printer.
12. Carry out the instructions displayed onthe screen to complete the wireless Canon Pixma Tr4520 setup.

canon pixma tr4520 double sided printing

Duplex printing setup:

1. Connect the printer and the computer having the printer software installed to the same router network via a wired or wireless network.
2. Now, launch the printer setup window on the computer, and go to the Page Setup
3. Tick the checkbox of the Duplex Printingand the Automatic options to print on both sides of a page
4. Following that, set the other print settings such as page layout, page size, orientation, and a number of copies.
5. Also, set the Print Area Setupbecause, with the duplex printing, the print area can narrow on the document.
6. After all the paper and print settings are done, click the OK

how to load paper in canon pixma tr4520

Loading Photo paper:

1. Make sure to use the original Canon photo paper for photo printing.
2. Open the printer's front cover and gently extend the paper cassette until it stops.
3. Shift the paper edge guides to the edges of the cassette, then arrange the photo paper in portrait orientation with the printing face down in the cassette.
4. Place the paper against the back edge of the cassette and slide the paper guides to the paper edges.
5. See that you do not squeeze the paper.
6. Next, holding the front cover, place the cassette inside the printer and check if the arrow mark aligns with the printer edge.
7. Draw the paper output trayand then proceed to set the paper settings on the operational panel and print.

how to scan on canon pixma tr4520

Scan setup:

1. Install the Canon IJ Scan utility program on your computer and connect the computer to the router network.
2. Also, connect the Canon printer to the same network.
3. Next, lift the document cover of the printer and place the document on the platen glass in landscape orientation.
4. Align the left edge of the paper with the left edge of the glass and close the document cover.
5. Open the Scan utility on the computer and make the necessary scan settings and click OK.
6. Select the scan mode from the given options and begin the scan.
7. Perform these steps we can execute the Canon Pixma Tr4520 setup.

canon pixma tr4520 scan multiple pages

1. You can scan multiple pages using the platen glass, but the easiest way is to scan using the Auto Document Feeder.
2. Remove the other scan documents from the scanner unitand then unfold the document tray of the printer.
3. Move the document guides to the ends and arrange the document with the side to be scanned facing up in the tray.
4. Do not stack more paper, arrange it loose.Stop when it reaches the edge.
5. Shift the document guides to the edges of the scan document and continue with scanning.

canon pixma tr4520 double sided scanning

Using ADF for double-sided scan:

1. Connect the computer with the IJ Scan Utility and the Canon printer to one router network.
2. Arrange the scan document in the document tray such that the front page of the document is on the top.
3. After placing the document and adjusting the document guides, move to the computer.
4. Launch the Canon IJ Scan Utility Liteprogram on the screen and then click the Settings
5. Next, the Settingswindow shows up. Under the Document Scan section, set the required scan settings.
6. Choose Document (ADF)as the Select Source and tick the checkbox of Scan both sides when scanning from the ADF.
7. When the scan setting is done, click the OKbutton and then select a scan option to start scanning.
8. By using these steps we can execute the Canon Pixma Tr4520 setup.

1. Turn off the printer and connect the telephone cable from the wall jack to the LINE port on the rear side of the printer.
2. After connecting, turn on the printer and press the Setup button on the operational panel.
3. A list of options appears under theSetup menu, select Fax settings, then choose FAX user settings.
4. Next, choose the Telephone Line Typemenu and then select either the Rotary pulse or Touch tone

5. Return to the FAX screen by pressing the FAX button.
6. For receive mode settings, press the Menu/Wirelessconnect button of the panel and go to the main Fax screen.
7. Choose the Receive mode settingsoption and go on to select a receive mode.
8. You can also configure the advanced settings.
9. Now, save the changes and complete the fax settings.

canon pixma tr4520 troubleshooting

When you face any trouble with the printer, you need the right steps to overcome it. Sometimes, the printer displays error messages indicating a particular issue. You can contact us to get simple steps to solve any printer issues. Below are some of the common printer issues that you might come across while using your printer.

canon pixma tr4520 offline

If the printer goes offline, then use the below solutions to solve the problem.

1. Verify whether the power supply is proper to the printer and see if the power cable is damaged.
2. Check the network connection status. If the network is not stable, then secure the ends of the network cable.
3. Open the printer window on the computerconnected to the printer via a network, and if there are pending print jobs, then remove them.
4. Restart the router and retry the connection setup.
5. Use these steps we can exceute the Canon Pixma Tr4520 setup.

canon pixma tr4520 paper jam error

When there is a paper jam inside the printer, follow the below steps to resolve the issue.

1. Switch off the printer and disconnect the power & network cables.
2. Open the printer's front cover and take out the paper cassette from inside.
3. If the paper is stuck behind the ink cartridge holder, move the holder to an end and slowly remove the stuck paper.
4. In case the paper is clogged in the printer system, then use both the hands to pull the paper out without tearing into pieces.
5. Remove even a small piece of paper from the inside, then replace the paper cassette and close the front cover.
6. Plug the power cord and turn on the printer. Verify whether the paper jam is clear.

canon pixma tr4520 printer not responding

1. Sometimes,the printer does not respond to your commands; in such case, check if the network cables are secure.
2. Poor wireless network can cause trouble tothe printer communication, ensure the printer is in the range of a good wireless network.

canon pixma tr4520 won't connect to wifi

1. See if the other Wi-Fi devices can connect to the Wi-Fi router network; if it does not, then restart the router.
2. When the wireless setup of the printer is not proper, the printer cannot connect to the Wi-Fi network.
3. Verify whetheryou are using the correct network SSID and password to connect the printer to the router network.
4. Place the printer near the Wi-Fi router network signal.

canon pixma tr4520 reset

1. Reset changes all the printer settings to the factory defaults. 
2. On the printer's home screen, go to the Settingsmenu and then choose Reset setting.
3. From the given options, select the appropriate reset option, choose All datato reset all the printer settings, and press OK.
4. By utilizing these steps we can execute the Canon Pixma Tr4520 setup.