CANON PIXMA MX432 SETUP

Canon PIXMA MX432 is a compact, all-in-one, wireless printer which is ideal for home use. The wireless printing feature helps in printing from anywhere and any wireless device, be it a computer or mobile phone. Read the below procedure to perform the Canon Pixma mx432 Setup.

Step-1: Unpack the printer

  1. Take out the printer from the carton and check for the other printer accessories inside the box.
  2. Keep the accessories safe for later use.
  3. Now, remove all the packaging tapes and materials from the printer.
  4. Open the front cover, paper output tray, document cover, and paper output cover.
  5. Remove all the protective tapes and covers from the inside of the printer.
  6. Next, close the paper output cover and the document cover.
CANON PIXMA MX432 SETUP

Step-2: Power connection

  1. Take the power cord, plug it to a wall outlet, and connect the other end to the printer’s power cord connector.
  2. Power up the printer by pressing the ON button on the operational panel.
  3. Following that, set the language and press the OK button.

Step-3: Install the ink cartridges

  1. Keep the paper output tray and paper output cover open.
  2. Slowly lower the cartridge lock lever and then unpack the ink cartridge.
  3. Remove the protective tape covering the electrical contacts and insert the cartridge into its slot. The black cartridge should be installed on the right slot and the color on the left slot.
  4. Raise the lock lever to hold the cartridge in position. 
  5. Now, Canon Pixma mx432 Setup and install the other ink cartridge in the same way and close the paper output cover.

Step-4: Feed the paper

  1. When the Wireless LAN setup screen appears on the display panel, select Cancel for now to proceed with the setup.
  2. See that the paper output tray is open, then open the paper support.
  3. Move the right paper guides to the edge.
  4. Arrange the paper with the print side facing down and insert it.
  5. Shift the paper guide to hold the paper in a position, but do not make it too tight.
  6. Next, open the paper output tray and paper output support.

Step-5: Install the software

  1. Once you complete the physical setup of the printer, install the printer software on your computer.
  2. The printer software enables you to manage and control the printer operations from the computer.

CANON PIXMA MX432 DRIVER DOWNLOAD

Canon Pixma mx432 Install

The printer driver is provided on the installation CD along with the printer. Also, it is available online. Read the below steps to download the printer driver.

  1. Use the search icon to find your printer model and download its driver from our website.
  2. Save the driver installer file on your computer.
  3. Otherwise, input the official Canon website URL in the address bar of the browser and press Enter.
  4. When the support page opens up, search for the printer model.
  5. Next, click the Drivers & Downloads tab and select your computer’s OS version from the Operating System drop-down menu.
  6. Click the Select button beside the driver you are downloading and click Download.

CANON PIXMA MX432 DRIVER INSTALLATION

You can manage the printer operation from the computer only after you install the printer driver.

  1. Get the printer driver installer either by download or from the installation CD.
  2. Open the driver installer file on the computer to begin the installation.
  3. Set the language, read the license agreement, and complete the connection setup.
  4. Choose the software you are downloading under Software Installation List and click Next.
  5. Read the Extended Survey Program, either agree or disagree it, and finish the process.
  6. Once the driver installation is complete, click Exit to close the window.

CANON PIXMA MX432 MANUAL DOWNLOAD

User Manual forCanon Pixma mx432 Setup
  1. The user manual booklet is provided during the printer purchase. Even if you lose it, you can download it online.
  2. Visit the official Canon webpage from the browser and find the printer model to go to its support page.
  3. Next, navigate to the Manuals section.
  4. Select the user manual you want to download and click Download.
CANON PIXMA MX432 MANUAL DOWNLOAD

CANON PIXMA MX432 WIFI SETUP

  1. Enable the router’s Wi-Fi network and connect the computer to it.
  2. You need to know the wireless network name and password for the wireless connection setup.
  3. Insert the installation CD into the computer and run it to start the installation process.
  4. If you do not have the CD, download the printer driver installer file.
  5. When the setup window opens up, select the preferred language and click Next.
  1. Choose Wireless Connection as the connection type and then select Wireless LAN setup.
  2. Click Other Methods and select the Start Again button.
  3. Keep a USB cable ready and click Wireless Setup Using the USB cable.
  4. Follow the instructions to complete the wireless connection setup.
  5. Print a test page to verify the wireless connection.

HOW TO CHANGE INK CARTRIDGE CANON PIXMA MX432

When the printer is low on ink, see that you replace it with a new one. Make sure to get the genuine Canon ink cartridge.

  1. Keep the printer powered on during the entire process.
  2. Open the front cover, paper output tray, and paper output cover in this order.
  3. Now, the cartridge holder will return to its original position, and the head cover will open automatically.
  4. Wait until the cartridge holder remains static.
  5. Press the lock lever down, then remove the used ink cartridge.
  6. Unpack the new ink cartridge, install it in the respective slot, and lift the lock lever.
  7. Finally, close the paper output cover.
CHANGE INK CARTRIDGE CANON PIXMA MX432

HOW TO SCAN WITH CANON PIXMA MX432

Step-1: Install MP Drivers 

  1. The MP drivers are available on the Canon website from where you can download easily.
  2. Run the downloaded driver file on your computer to install it.
  3. Open the IJ Network Scanner Selector EX on the computer and select Scan-from-Operational-Panel under Settings.
  4. Choose your Canon scanner and click OK.

Step-2: Connect the computer and scanner

  1. Only if the scanner and computer are connected, you can perform the scan operation.
  2. Connect both the devices to a Wi-Fi network.

Step-3: Start scanning

  1. Press the Scan button on the operational panel and then select a scan type.
  2. Choose the device on which you are saving the scanned document.
  3. Make the necessary scan settings and then load the document on the printer’s platen glass or in the ADF.
  4. Now, press the Color or Black button to start scanning.

CANON PIXMA MX432 SCANNER SOFTWARE DOWNLOAD

You need to download and install the scanner software on your computer to perform scan any document using the printer.

  1. Open the browser and visit the official Canon website.
  2. Search the printer model and go to the printer’s support page.
  3. Click the Drivers & Downloads tab, select the appropriate operating system, and view the printer’s drivers & software.
  4. Select the MP Driver, download it, and run the tool to install it.
  5. Find the MP Navigator EX scanner software under Software and then download it.

CANON PIXMA MX432 SCAN DOCUMENT

After installing the MP Navigator EX software on the computer, you can follow the steps given below to scan a document.

  1. Turn the printer ON and connect it to a computer. Make sure both the devices are connected to the same wireless network.
  2. Load the document on the platen glass or in the ADF of the printer.
  3. Next, select All Programs on the desktop and select Canon Utilities > IJ Network Scanner Selector EX to open the MP Navigator EX window.
  4. Click Photos/Documents on the main screen and choose the suitable Document Type on the left panel.
  5. Now, click the Specify button, make the required scan settings, and click OK to save the changes.
  6. Select the Scan button and again click Scan in the pop-up dialog box to begin scanning.

HOW TO RECEIVE FAX ON CANON PIXMA MX432

  1. Before you Canon Pixma mx432 Setup and configure the Fax settings, connect the telephone cable to the printer’s telephone line port. 
  2. Open the Fax settings and configure the telephone line type. 
  3. Next, press the Fax button and then the Menu button.
  4. Use the navigation keys to move to the Receive mode set menu and press OK.
  5. Select receive mode, press OK, and then choose Yes to proceed.
  6. For each setting item, select an option to configure the advanced fax settings.

CANON PIXMA MX432 FIRMWARE UPDATE

The latest printer firmware is available online on the printer’s support page.

  1. Visit the official Canon website and search for the printer model.
  2. Click the printer name and go to the support page. Then, select the Drivers & Downloads tab.
  3. Now, click Firmware to view the new firmware update versions.
  4. Select the firmware update you are downloading and click the Download button.
  5. After saving the firmware update on the desktop, open it and run the Canon Pixma mx432 Setup and installation. 

CANON PIXMA MX432 TROUBLESHOOTING

When the printer does not respond or gets interrupted while performing any printer operation, immediately check the printer display for the error message. The error message indicates the printer’s problem and you can refer to the user manuals for the basic solutions to fix the error. If you cannot solve the Canon Pixma mx432 Setup problem, contact our technical team for more support. 

CANON MX432 PRINTER OFFLINE

If the printer displays the error message “Printer is offline,” try out the below steps to fix the error.

  1. See that the printer is connected to an active network. If the network signal is weak, move the printer within the strong Wi-Fi router.
  2. If the power cord connection is not secure, tighten the cord ends to ensure that the printer is turned on.
  3. On the Windows computer, open the Run dialog box by pressing both the Win and the R keys at once. Enter “control printers” and click OK to view the printer’s list. Now, right-click your Canon printer and disable Use Printer Offline.

HOW TO FIX A PAPER JAM ON A CANON PIXMA MX432

When the paper gets stuck in the paper output slot, follow these steps to clear the paper jam.

  1. Remove the paper fed to the printer.
  2. Use both the hands to slowly pull the paper out.
  3. If you cannot pull the paper, then restart the printer. The printer will eject the paper and you have to clear the paper.
  4. Again, load enough paper in the printer and resume printing.

HOW TO RESET CANON PIXMA MX432

Reset the printer only when required, because resetting erases all the printer settings and restores the default factory settings.

  1. On the operational panel, press the Setup button and select Reset Settings.
  2. Use the navigation keys to view the different reset options.
  3. Choose All data to clear all the printer settings.
  4. Once the reset is done, all the printer settings will be reset to the default factory settings.

CANON PIXMA MX432 SCANNER NOT WORKING

Sometimes the scanner might not respond to the user commands causing trouble. Read the following fixes to resolve the scanner issue.

  1. Verify that the printer is not in the offline mode and it has a stable power connection.
  2. If the printer is connected to your computer using a USB cable, check the cable connection and tighten the ends.
  3. Connect the Canon Pixma mx432 Setup USB cable to any other USB port on your computer and see if the scanner works.
  4. Restart the scanner if the error persists.
printer setup support