Canon Pixma Megatank g7020 Setup

Unpack

  1. Unbox the printer and check if the printer accessories are present in the box.
  2. Take off all the packaging materials from the printer, then lift the scanner unit and remove the protective materials from inside of the printer. carry out these below-mentioned steps the Canon Pixma Megatank g7020 Setup

Insert the print heads

  1. Keep the print head locking cover open, and then unpack anew print head.
  2. Peel off the label and the protective film on the print head and insert it into the corresponding slot in the printer.
  3. Likewise, insert the other print head and close the print head cover properly.
  4. Make sure that the C color print head is placed on the left, and the B color print head is on the right-hand side.
  5. Next, press the two joint buttons at once and make sure they snap into position.

Fill ink

  1. Unfold the ink tank cover and turn open the tank cap.
  2. Now, open the ink bottle and see that you are using the right ink to fill the ink tank.
  3. Place the ink bottle outlet port into the filling port on the ink tank, slowly hold the bottle upright.
  4. Wait until the ink tank is full; after that, remove the ink bottle from the ink tank.
  5. Close the ink tank with the cap, then close the ink tank cover and fill the other ink tanks in the same way.
  6. Lower the scanner unit of the printer.

Power connection

  1. Get the power cord and attach it to the printer and connect the other end to an electrical wall socket.
  2. On the operational panel, press the power button to switch on the printer.
  3. Next, set the language and region on the display panel using the keypad.
  4. Use the following steps we can execute the Canon Pixma Megatank g7020 Setup.
Canon Pixma Megatank g7020 Setup

Load paper

  1. Continue with the printer settings on the display panel.
  2. When the message ‘Start alignment to improve’ appears, choose Yes and proceed to load the paper.
  3. Draw the paper cassette out ofthe printer and shift the paper guides to the edges of the cassette.
  4. Position the front edge guide to the paper size you are loading.
  5. Then, place the paper in the cassette against the front edge with the printing side facing
  6. Now, adjust the paper guides to the edge of the paper.
  7. Also, make sure you do not bend or cripple the paper.
  8. See that the paper level is below the maximum level indicator.
  9. Place the paper cassetteback into the printer and extend the paper output tray.
  10. Following that set the required print settings on the printer’s display panel.

canon pixma megatank g7020 driver download

  1. Open a browseron your computer, enter URL of Canon printer’s official website in the address bar, and press Enter.
  2. When the webpage opensup, search for the printer model Canon Megatank G7020.
  3. On the support page, and click the Drivers & Downloads
  4. Select the suitable Operating Systemfrom the drop-down menu and choose the Language from the given list.
  5. Next, select the download link given below to download the driver package tothe computer.
  6. Using these steps we can execute the Canon Pixma Megatank g7020 Setup.
Driver for Canon Pixma IP4700 Printer

canon pixma megatank g7020 manual download

  1. From the browser window, visit the officialCanon website.
  2. Find the printer model for which you want the manual, and enter its support page.
  3. Navigate to the Manualssection, choose the Language, and select the manual you want to download.
  4. The printer user manuals are available in PDF format.
Canon Pixma IP4700 Printer User Manual

install canon pixma megatank g7020 driver

  1. You have to acquire the printer driver for installing.Either download the printer driver or else insert the installation CD in the computer.
  2. Open the CD drive and double-click the driverinstaller file.
  3. The installation window opens up on the screen.Now, select Start Setup and continue with the installation.
  4. After reading the Licence Agreement, accept it by clicking the Agree
  5. The setup wizard will scanfor the available networks; if the Ethernet cable is connected, the printer detects the network, and if it is a wireless network, the network name appears in the window.
  6. Complete the guided steps to finish the driver installation and finally select Continue onlineto install additional software from the website.
  7. By following steps we can execute the Canon Pixma Megatank g7020 Setup.

canon pixma megatank g7020 wireless setup

  1. Turn on the Wi-Fi router and connect the computer to the network.
  2. Write down the network name and the password.
  3. Get the printer driver from online orthe installation CD.
  4. Open the driver installer file to start the setup.
  5. When the printer window opens up on the screen, click the Start Setup
  6. Following that, click Nextto continue with the process.
  7. Read the License Agreement and select Agreeto accept the terms & policies.
  8. Follow the on-screen instructions and choose Wireless networkas the connection type.
  9. When the network name appears in the window, enter the password and click Yes.
  10. Confirm the connection method and complete the wireless setup.

canon pixma g7020 print setup

Printing setup:

  1. Load paper and check the ink level in the printer before printing
  2. Connect the Canon printer and your computer having the printer software to the same network or connect them directly via a USB cable.
  3. Now, open the Canon printer software program on the computer.
  4. When the window opens up, in the Quick Setuppanel, set the Media Type, Printer paper Size, Paper Source, number of copies, and Print Quality.
  5. To set the current settings as default, check the Always Print with Current Settings 
  6. If you want to preview the print document, tick the checkbox nearPreview before printing and select OK.

canon pixma g7020 scan setup

Using Canon IJ Scan Utility:

  1. After connecting the computer and the scanner to the same network, open the document cover of the printer.
  2. Place the document or picture to be scanned on the scanner glass and close the cover.
  3. Launch the Scan utility on the computer and select Settings.
  4. Select the printer name and choose the scan type to start the scan.
  5. Perform these following steps we can execute the Canon Pixma Megatank g7020 Setup.

canon pixma g7020 troubleshooting

When the printer faces any issue related to the network, or the printer functionalities like printing, scanning, paper jam, print quality, etc., an error message appears on the printer’s display panel. You can resolve the issue by following the instructions on display and by checking the manuals. If you need more help, then contact our support team.

canon pixma g7020 offline

When the printer goes offline, consider the following solutions to fix the problem.

  1. Launch the Canon Printer Assistant program on the system and select the Auto Power menu. Underthat, make sure the Auto Power is turned on.
  2. Check the network connection status of the printer.In case it is a wired network, verify if the cable contacts are secure.
  3. Make sure the router is working properly, if not, then restart and check if it connects.
  4. See if the printer has pending or paused print jobs on the computer. Then delete those jobs and restart the printer.
Canon Pixma Megatank g7020 Setup

canon pixma g7020 paper jam

Paper jam in cassette:

  1. Whilefeeding paper, if the paper gets stuck in the paper cassette of the printer, use the below steps to fix the jam.
  2. Take out the paper output tray,tray extension, and the paper cassette from the printer.
  3. Use both hands to pull out the clogged paper from the printer.
  4. After removing the paper, replace the tray, cassette, and the extension into the printer.
  5. By using these steps we can execute the Canon Pixma Megatank g7020 Setup.

Paper jam in the rear tray:

  1. If the paper is stuck in the rear tray, then gently pull out the paper either through the output slot or the rear tray.

Copyright © 2022 - 2023 printer-setup.us | All Rights Reserved.

printer setup support
➤