Canon Pixma IP4600 Setup Guidance

1. Open the printer carton and find the printer along with its components.
2. The components are the printer manual, AC power cord, setup CD-ROM, MP-101 sheet, and warranty document.
3. Keep the Canon Pixma IP4600 Setup on your desk.
4. The printer requires less space on your desk since it is a compact device.

Power Up the IP4600 Printer

1. Attach the AC power cord to the power port at the back of the printer and electrical wall outlet directly.
2. Use the power button to switch on the Canon Pixma IP4600 printer.
3. The printer powers on when the power light starts to flash in green.

Insert the Print Head

1. Open the paper output tray and top access door of the Canon Pixma IP4600 Setup.
2. Take out the orange-colored protective cap from the print head.
3. Insert the print head into its place.
4. Close the lock lever of the print head.

Fix the Ink Tanks

1. Press the PUSH mark on the ink tank until it fits into the place.
2. Make sure that the ink lamp of the printer starts to flash in red.
3. Insert all the other tanks in the same way as explained in the previous steps.
4. Now close the access cover at the top.

Launch the Canon Pixma IP4600 Driver Software

1. Download the driver for the Canon Pixma IP4600 printer on your computer.
2. Install the software after downloading it.

Note : Make use of the Driver Download button on this page to computerize the software on your computer.

1. Remove the cassette from the printer and take out the cover on it.
2. Pull the tab on the cassette and extend it.
3. Move the guides to both the edges of the cassette.
4. Load suitable sheets in the paper tray of the printer.
5. Slide the guides and fix the sheets.
6. Re-fix the cover and install the cassette into the Canon Pixma IP4600 Setup.

Canon IP4600 Printer Driver for Mac

If you are using the latest versions (above OS X 10.7) of the Mac system, make use of the in-built printer software on your computer.

The installation procedure of the Canon Pixma IP4600 printer software varies based on the OS version of your computer or laptop.

Canon Pixma IP4600 Manual Download

The manual of the Canon Pixma IP4600 printer includes guidelines to set it up and perform its functions.

Give a click on the above given key and computerize the manual of the Canon Pixma IP4600 setup for free.

Canon Pixma IP4600 Wireless Connection Guidance

1. "Make sure" that your Canon Pixma IP4600 printer has a WPS button.
2. Hold the "Wi-Fi key" on the control panel of the printer.
3. Press the Wi-Fi button on your router within a few seconds.
4. Wait until the printer gets connected to the network of the router.
5. Make sure that the light of the wireless key starts to flash.

How to Load Paper in Canon Pixma IP4600?

Simple Steps to Keep the Sheets in the Rear Tray

1. Open the cover of the rear tray.
2. Slide the guides to both edges of the Canon printer.
3. Keep enough sheets in the center of the tray.
4. Slide the guides against the edges of the sheets.

How to Remove Canon IP4600 Printhead?

1. Check if the Canon IP4600 printer is turned on.
2. Open the output tray and access cover at the top of the printer.
3. Once you open the access cover, the print head moves to the center of the printer.
4. Take out the ink tanks from the printer by using its tab.
5. Open the print head lock lever and remove the print head from the printer.
6. Unpack the new print head which you have purchased to replace the old one.
7. Insert the print head into the respective place of the printer.
8. Insert the removed ink tanks and gently press the PUSH mark on them to fix into the place.
9. Re-fix the inner door and close the top access door.

How to Reset Canon Pixma IP4600 Printer?

• Power up the Canon Pixma IP4600 setup if it is turned off previously.
• Find the Setup menu by using the arrow keys.
• Select Device Settings.
• Locate the Reset Settings option and tap OK to select it.

Fixed: Canon Pixma IP4600 not Working Issue

• Examine the power connection of the Canon Pixma IP4600 printer.
• Make sure that the power cord of the printer is connected properly.
• Also, make sure that the power source is working properly.
• Delete the Canon Pixma IP4600 printer software on your computer.
• Reinstall newly launched Canon printer software on your computer.
• You can avail the software from this page for free.
• Set up the connection between your Canon Pixma IP4600 setup and computer while installing the software.
• Perform a function of the Canon printer and ensure that the issue is solved.
• If the Canon Pixma IP4600 printer is not working yet, call our technical support team for more solutions.

Solved: Canon Pixma IP4600 Flashing Lights Issue

• Reload the paper in the rear tray and cassette of the Canon
• Pixma IP4600 printer.
• Make sure that the sheets are compatible with the tray and cassette.
• Make sure that the output tray of the printer is opened.
• Reinstall the ink tanks and print head of the Canon Pixma printer.
• If the ink level of the ink tanks are low or it is damaged, replace them with a new set.
• Make sure that the inner cover of the printer is closed.
• If the ink absorber of the Canon Pixma IP4600 Setup is full, replace it with a new one.