Canon Pixma IP4500 Setup Guidance

Remove the Canon Pixma IP4500 printer from its package and keep it on your desk.
Make sure that the desk is flat and clean.
Attach one end of the power cable provided the printer carton and the other end to an electrical wall outlet directly.
Tap the power button on the control panel of the Canon printer and turn it on.
Open the access cover at the top of the Canon printer.
Now the print head holder of the printer to the center of the printer.
Raise the inner cover of the Canon Pixma IP4500 Setup.
Take the print head provided in the printer box and unpack it.
Take out the orange-colored cap from the print head.
Open the print head lock lever and insert the unpacked print head into the printer.
Gently push the print head until it fits into the holder. Close the lock lever.
Unpack the ink tanks provided in the Canon Pixma IP4500 printer carton.

Remove the Canon Pixma IP4500 printer from its package and keep it on your desk.
Remove the orange-colored tapes from the ink tanks.
Also, remove the protective caps at the bottom of the tanks.
Insert the tanks into the respective holders.
Once you fix the ink tanks, the ink lamp starts to flash in red.
Now close the inner and top cover.
Place the provided sheets in the rear tray of the Canon Pixma IP4500 printer with their printing side facing up.
Arrange the sheets by sliding the paper guides.
Extend the cassette of the Canon Pixma IP4500 printer to its maximum limit.
Remove the packing material from the cassette.
Load suitable sheets in the cassette with their printing side facing down.
Thus the hardware setup of the Canon Pixma IP4500 Setup is executed successfully.

Canon Pixma IP4500 Driver Download Guidance

After setting the hardware of the Canon Pixma IP 4500 printer, you have to computerize its software. Refer to the above topic to set up the hardware of the Canon Pixma IP4500 printer. Make use of the Driver Download key below to download the printer software on your computer for free.

If you are in search of the Canon Pixma IP4500 printer software for the Windows operating system, click the key below to download the software for free.

Note : The provided software is compatible with the Windows OS 8.1 and below versions. If you are using the Windows OS of version 10, make use of the built-in printer software to execute the printer functions.

Mac users can utilize the Driver Download key provided below to download the Canon Pixma IP4500 printer software on your computer.

Note : The printer software is compatible with the Mac OS of versions 10.5, 10.8, 10.6, and 10.7. The latest versions of the Mac devices have in-built printer software to perform the functions of the Canon Pixma IP4500 printer.

Canon Pixma IP4500 Manual Download Guidance

The manual for the Canon Pixma IP4500 Setup includes a set of instructions to perform its operations and fix any issues with it. You can also find complete guidelines to set up the hardware and software of the printer in the manual. We provide soft copy of the manual for free. Give a click on the Manual Download key for downloading the soft copy of the Canon Pixma IP4500 printer’s manual on your computer for free.

Canon Pixma IP4500 Driver Installation Guidance

The installation process can be executed in two ways. One is by using the Driver Download key provided on this page or the software CD provided in the printer box.
Refer to the following steps to install the Canon Pixma IP500 printer software by using the installation CD.
Insert the CD into your computer in which you need to install the Canon printer software.
Follow the prompts and guidelines on the display to install the printer driver.

Note : To install the software by using the Driver Download button, click the key, open the downloaded driver file and follow the prompts on the screen for installing the Canon Pixma ip4500 printer software.

Canon Pixma IP4500 Wireless Printing Guidance

Refer to the following topic to print from your "Canon Pixma IP4500 printer wirelessly".

How to Print on Canon Pixma IP4500 Printer?

"Make sure" that the cassette of the Canon Pixma IP4500 setup is loaded with suitable sheets.

Connect your Canon Pixma IP4500 printer and computer to the same network of a router.

Configure the print settings.

Open any document you need to print in any application.

"Locate" the Print option and select it.

"Make sure" that your printer name is selected.

Set the other print settings and tap Print to begin the printing process.

How to Scan & Fax on Canon Pixma IP4500?

The Canon Pixma IP4500 printer is well known for printing photos. "It is not capable of executing the scan and fax functions".

Canon Pixma IP4500 Setup Troubleshooting Guidance

Troubleshoot any problems with the Canon Pixma IP4500 printer by availing assistance from our customer support team. Our experts are well-qualified to provide easy solutions to fix any issues with your Canon Pixma IP4500 printer.

Canon Pixma IP4500 Setup not printing black issue

Fixed: Canon Pixma IP4500 not Printing Black

Make sure that the blank ink cartridge of the Canon Pixma IP4500 printer is installed correctly.
Restart your Canon printer and computer.
If you find that the black ink cartridge is damaged or not working properly, replace it with a new one.
Always use genuine cartridges to get rid of the printing issues with the Canon Pixma IP4500 printer.
The cartridges can be purchased from the manufacturer’s store.

Fixed: Canon Pixma IP4500 Printhead Reset

It is impossible to reset the print head of the Canon Pixma IP4500 setup. Instead, you can clean it.
Refer to the following steps to clean the print head.
Power on the Canon Pixma IP4500 printer by using its power button.
Open the front feeder and output paper support.
Load suitable sheets in the front feeder or auto sheet feeder of the printer.
Tap the Menu key on the control panel of the printer.
Go to Maintenance or Settings and tap OK.
Locate the Cleaning option and select it.
Wait until the Canon Pixma IP4500 printer cleans the print head.

How to Reset Canon Pixma IP4500 Printer?

Switch off the Canon Pixma IP4500 printer if it is turned on.
Now hold the power button to turn on the printer and press the Resume key.
Again press the Resume button for 2 times and release both the buttons.
Now the green light on the printer starts to flash.
Tap the Resume key for 4 times.
Turn off the printer and power it on.
For more guidance to reset the Canon Pixma IP4500 setup, call our well-qualified technical support team.