GUIDANCE FOR CANON PIXMA iP2770 SETUP

Canon Pixma iP2770 is a stylish, low-cost inkjet printer that can easily print high-quality photos. It also has an in-built USB 2.0 connection for faster data transfer. Continue reading the below steps to know the Canon Pixma iP2770 setup.

CANON PIXMA iP2770 SETUP

Step-1: Unpack the printer

  1. Take the printer out of the carton, place it on a stable surface, and then look for the other accessories in the box.
  2. Keep the power cord, ink cartridges, user manuals, and installation CD aside for later use.
  3. Remove all the packaging tapes and protective materials from the printer.
  4. Lift the front cover, remove the orange protective tapes and objects from inside, and close the cover.

Step-2: Power connection

  1. Use the power cord provided with the printer to connect it to the power supply and press the ON button on the printer’s right side.
  2. When the printer turns on, make sure the Power LED lights up.

Step-3: Install the ink cartridges

  1. Keep the front cover of the printer open and let the ink cartridge holder move to its original position.
  2. Now, release the tab and open the ink cartridge cover of the black color.
  3. Unpack the black ink cartridge and remove the orange film covering the contacts.
  4. Insert the black ink cartridge in its slot and close the Cartridge Locking cover.
  5. Following that, install the other ink cartridges in the printer and lower the front cover.
  6. Wait and see if the power LED is solid green and then continue with the next step.
  7. Follow these steps to configure the canon pixma iP2770 setup.

Step-4: Feed paper

  1. Raise the paper support and move the paper guides to the ends.
  2. Neatly arrange the paper in a stack with the print side facing outwards and place it on the rear tray.
  3. Move the paper guides to the edges of the paper without folding the edges.

Step-5: Software installation

  1. Once the physical setup is done, go on to download and install the printer software.
  2. The printer software enables you to control and manage the print operations from the computer.

CANON PIXMA iP2770 DRIVER FOR WINDOWS 10

Driver for  Printer
  1. Launch a browser on your computer and visit the official Canon website.
  2. Use the search icon at the top right end to find the printer model ‘Canon Pixma IP2770’ and go to the printer’s support page.
  3. Now, click the Drivers & Downloads tab and choose Windows 10 (x32 or x64) as the Operating System.
  4. You can find the available drivers in the Drivers section. Click the Select button and then click Download.
  5. When the driver installer download is complete, save it on the desktop.
  6. Open the driver installer file to run the installation and click Yes in the User Account Control box.
  7. Follow the guided instructions to complete the installation.
  8. Perform these steps to configure the canon pixma iP2770 setup.

CANON PIXMA iP2770 DRIVER FOR WINDOWS 7

Driver for  Printer

You can download the printer driver for Windows 7 in a similar way as Windows 10. Read the below steps to download and install the Canon printer driver on Windows 7.

  1. Enter the official Canon website URL on a web browser and press Enter.
  2. Once the webpage opens up, find the printer model and access its support page.
  3. Go to the Drivers & Downloads section, click the Operating System menu, and select Windows 7 (x32 or x64).
  4. When the list of drivers shows up, click the Select button of the driver you want to download and select Download.
  5. Save the driver file and then double-click it to start the installation.
  6. Read the instructions and select the choices accordingly. Complete the driver installation and close the window.

CANON PIXMA iP2770 DRIVER FOR MAC

Driver for Printer
  1. Go to the Canon website and navigate to the printer’s support page.
  2. Select the Drivers & Downloads tab and choose the appropriate Mac version from the Operating System drop-down menu.
  3. The drivers supporting Mac will be listed. Select the driver you want and download it.
  4. After downloading, open the driver to install it on your Mac.
  5. Select the Easy Install button in the printer setup window and click Install on the next screen.
  6. When the printer software prompts, connect the USB cable between the printer and computer.
  7. Complete the installation with the help of the instructions on the screen.
  8. Proceed these steps to configure the canon pixma iP2770 setup.
CANON PIXMA iP2770 SETUP

HOW TO INSTALL CANON PIXMA iP2770 WITHOUT CD?

  1. If you don’t have the installation CD, then you can download the printer driver from the official website and install it on your computer. Carry out the instructions given below to install Canon Pixma iP2770 without the CD.
  2. Go to the Canon webpage from a web browser and search the printer model.
  3. Under Drivers & Downloads, download the suitable driver and save it on the computer.
  4. Run the installer file.
  5. Click Easy Install, select Install, read the instruction, and connect the USB cable when prompted by the installation wizard.
  6. If the installer asks for the User Registration number, open the front cover of the printer and locate the user registration number.
  7. Click the Exit button once the installation is complete.

CANON PIXMA iP2770 MANUAL DOWNLOAD

User Manual for Brother MFC-L2690DW Setup
  1. Visit the official Canon website and find the printer model to open its support page.
  2. Select the Manuals tab, choose the Language, and find the manuals below Guides & Manuals.
  3. Click the Select button of the manuals you wish to download.
  4. The User Manuals (Mac and Windows) are not available in PDF format. Instead, you can download it and use it as an on-screen manual.
  5. Using these steps to configure the canon pixma iP2770 setup.

HOW TO CHANGE CARTRIDGE CANON PIXMA iP2770?

When the ink level in the cartridge is very low, the print fades out. So, replace the used ink cartridge with a new one. You can get the genuine FINE ink cartridge from the Canon store.

  1. Keep the printer turned on and open the front cover.
  2. Wait until the cartridge holder moves to its original position.
  3. Open the ink cartridge locking cover and remove the old cartridge.
  4. Now, unpack the new ink cartridge, remove the protective film, and insert the ink cartridge into its slot.
  5. Close the cartridge locking cover firmly and lower the printer’s front cover to close it.

CANON PIXMA iP2770 WIRELESS PRINTING

The Canon Pixma iP2770 printer does not support wireless printing. It only supports the USB connection for which you have to install the printer software.

HOW TO TEST PRINT CANON PIXMA iP2770?

You can test the printer by printing without a computer.

  1. Turn on the printer and feed the paper in the rear tray.
  2. Hold the power button for 2 to 5 seconds and release it when the power light blinks fast.
  3. Now, the printer will print the test page.

HOW TO CONVERT CANON PIXMA iP2770 TO CISS?

CISS is the Continuous ink supply system, which is suitable for the inkjet printers to provide continuous ink for the printer system. The manufacturer uses FINE ink cartridges, which you have to replace every time it gets depleted.

  1. To convert the Canon Pixma iP2770 printer to CISS, you need CISS supplies, scissors, and paper towels.
  2. Drill a hole at the assigned position on the ink cartridge. The hole position varies on each cartridge.
  3. Put the sleeve in the hole and insert the hose into the hole.
  4. Next, use the suction tool to bring up the ink into the cartridge.
  5. Install the cartridges in their slots and make sure the hoses do not interfere while closing the cartridge locking cover.
  6. Tape the hoses to hold them together and then check if the cartridge holder can move freely.
  7. By following these steps to configure the canon pixma iP2770 setup.

CANON PIXMA iP2770 SCAN SETUP

You cannot perform the scan operation on the Canon Pixma iP2770 printer.

CANON PIXMA iP2770 SCANNER DRIVER 

There is no scanning feature on the Canon Pixma iP2770 printer, so there is no need for a scanning driver.

CANON PIXMA iP2770 SCAN SETUP

CANON PIXMA iP2770 TROUBLESHOOTING

When the printer does not respond to your input, then it might be facing some problems. Check if the Alarm LED of the printer is flashing orange. If so, then the printer is not ready to print. You can refer to the user manuals and on-screen manuals to resolve the printer issues. If you are finding it difficult to fix the problems, contact our technical team for more support. 

CANON PIXMA iP2770 PRINTER IS OFFLINE

The printer cannot print or perform any printer operation when it is offline. Try the following solutions to bring it back online.

  1. See if the power cord is connected to the printer and the wall socket properly.
  2. Remove the power cord from the printer and wait for some time. Then, reconnect the power cord and turn on the printer.
  3. Check if the USB cable ends are connected firmly.
  4. On the Windows system, open the Printers and Devices menu in the Control Panel window, right-click the printer name and select the See what’s printing option.
  5. Now, click the Printer menu and deselect the Use Printer Offline option.

HOW TO RESET CANON PIXMA iP2770

You can reset the printer settings to the default factory settings using the below steps. Make sure to reset only if it is necessary because resetting the printer clears the current settings and restores the default settings.

  1. Power off the printer and disconnect the power cord from the electrical socket.
  2. Press and hold the ON button, re-plug the power cord to the socket, and wait for 3 to 5 seconds.
  3. Now, press the Resume button twice and release the power button.
  4. Open the printer settings window on your computer and check the new settings.

CANON PIXMA iP2770 PAPER JAM PROBLEM

When a paper jam happens in the rear tray or output slot while you are printing, use the steps below to clear it.

  1. Stop all the printing jobs assigned to the printer from the computer and turn off the printer.
  2. Following that, carefully pull the paper stuck inside the rear tray or output slot.
  3. After removing the paper, turn on the printer, reload the paper for printing in the rear tray and press the Resume button to continue printing.
  4. By using the above steps to configure the canon pixma iP2770 setup.
CANON PIXMA iP2770 TROUBLESHOOTING
printer setup support