Support For Canon Pixma IP2600 Setup

The Canon Pixma IP2600 setup is uniquely designed for the user who loves to bring life to their photos. This printer prints photo with amazing print quality. Hope you bought the amazing printer to your home or office. Enjoy the printer functions after setting it up. Get easy guidelines on this page to set up your printer. Our techies are also here to guide you to configure the printer’s hardware & software.

How to Install a Canon IP2600 Printer?

Step 1: Unpack the Canon IP2600 printer

After purchasing the printer box from the manufacturer’s store, you have to unbox it.
Before you open the box, ensure that you can find the manufacturer’s seal on it.
Peel off the tapes on the printer using a knife or scissors.
Once you open the box, you can find the printer related components in it.
For easy access to the printer, prefer a flat, clean surface for placing it.
Find packing materials from inside & outside of the printer and remove them.
Configure the power connection and turn on the Canon Pixma IP2600 setup printer.

Step 2: Install the FINE ink cartridges.

The FINE ink cartridges are provided in the printer box.
Take the cartridges and remove the tapes on them.
Find the cartridge access cover and remove it.
Fix the black ink cartridge into the slot present at the left and color cartridge at the right.
You have to fix the cartridges by pushing them into the slots and close the door.

Step 3: Software setup of the Canon Pixma IP2600 printer.

Computerize the software of the Canon Pixma IP2600 setup printer by using this site or the software CD provided in the printer box.
Install the printer driver after downloading it.
Once you launch the software, you can start enjoying the Canon Pixma IP2600 printer functions.

Canon IP2600 Driver For Mac

The OS of your system has built-in printer software. You can also get compatible software from this website for free.

Canon IP2600 Driver For Windows

Use the installation CD for downloading the printer software on the Windows system. The driver helps your Windows system to communicate with your Canon Pixma IP2600 setup printer.

Canon IP2600 USB Setup

The USB setup is one of the best methods to connect your printer with a computer or laptop. Find easy guidelines in the following topics to set up the USB connection.

How to Connect Canon IP2600 Printer?

Firstly, quit all the running software on your computer.
Turn on the Canon Pixma IP2600 printer if it is powered off previously.
Do not execute the USB connection. Disconnect the cable if connected.
Computerize the Canon Pixma IP2600 printer software on your computer.
Double-click the driver file and begin to install the software.
Set the USB connection type in the connection screen.
Plug the USB cable to the ports of the Canon Pixma IP2600 setup printer and computer.
Ensure that the paper tray of the Canon Pixma IP2600 printer is loaded with enough sheets.

how to connect canon pixma ip2600 printer

How to Put Ink Cartridge In Canon IP2600?

Firstly, ensure that the Canon Pixma IP2600 printer is powered ON.

Raise the access cover of the Canon Pixma IP2600 printer.

Once you open the door, cartridge holder of the printer slides to its replacement position.

Unpack a new ink cartridge & remove the orange-colored tapes on it.

Fix the color cartridge into the slot present at the right and black at the left.

Ensure that the ink cartridges are fixed into the respective slots.

Close the door that you have opened previously.

How to Change Printer Cartridge Canon IP2600?

Hope you have bought a new ink cartridge to replace the old one.
Raise the ink cartridge access cover of the Canon Pixma IP2600 setup printer.
Locate the ink cartridge which you need to replace and remove it from the printer.
You can place the cartridge aside for recycling.
Take the new cartridge which you have bought from the manufacturer’s store and unpack it.
Find protective tapes & components on the cartridge and remove them.
Fix the cartridge into its slot and close the door.

How to Clean Ink Absorber Canon IP2600?

It is mandatory to check if the Canon Pixma IP2600 setup printer is powered off.
Raise the ink cartridge access lid of the printer.
Once you raise the lid, the ink or toner cartridge slides to its replacement position.
Remove the ink absorber from the rubber frame.
Take a bowl of soapy water.
Soak the absorber in the soapy water.
Scrub the absorber and wash it.
Take the absorber from the bowl and place it on paper towels.
Leave the absorber to dry for a few minutes and insert it into the frame.
Fix the frame into the printer and close the lid.

How to Reset Canon IP2600 Printer?

Resetting the Canon Pixma IP2600 setup printer is one of the best solutions for any problems that arise with it.
Find quick solutions in the following steps to reset the Canon Pixma IP2600 printer.
Power ON the printer using its power button.
Relax until the printer turns ON and becomes idle.
Once the printer remains silent, disconnect the power cable from the printer and power supply.
Open the access door of the Pixma printer.
Remove all the cartridges from the printer. Wait for a few minutes.
Insert the cartridges back into the printer.
Connect the power cable back to the devices.
Once you plug the power cable, the printer powers up automatically.
If the Pixma printer does not power up, press the power button to turn it on.
All the configurations of the printer reset to its default settings.

Canon IP2600 Printer Troubleshooting

You may experience difficulty to solve the ink cartridge issues with the Canon Pixma IP2600 setup printer. If so, find simple solutions on this page to solve the issue quickly. You can also reach our technical experts to avail more solutions to fix any problems related to your printer by contacting them.

Canon IP2600 Ink Cartridge Not Installed Properly

You have to check if the cartridges are inserted into the respective slots.
Open the access lid of the Pixma printer.
Take the ink cartridges out of the printer.
Check if the cartridges are in good condition.
You can replace the cartridges with a new set if they are damaged.
Make sure that the cartridges are inserted into the corresponding slots.
Close the access lid.
If the Canon Pixma IP2600 setup ink cartridge problem persists, contact our customer support for more solutions to fix the issue.

Canon IP2600 Not Printing

Check the power connection of the Canon IP2600 printer.
Do not forget to verify the connection between your printer and computer.
Wired connection
- Ensure that the USB or Ethernet cable is plugged to the corresponding ports of your Pixma printer and computer.
Wireless connection
- Verify if the devices are connected to the same network of an access point or router.
Check if the paper tray of the printer is loaded with compatible, enough sheets.
Reset the Canon Pixma IP2600 setup printer settings to its default configurations.