Quick & Easy Guide for Canon MX920 Setup

Canon MX920 Setup

Canon MX920 Unboxing and Setting Up

  1. Ensure that the Canon MX920 printer is not damaged before unboxing it.
  2. Remove all the seals and tapes on the printer carton and open it.
  3. You can find the Canon MX920 setup and its components like the power cord, ink tanks, installation CD, manual, connection cable, and plain sheets.
  4. Keep the Canon MX920 printer on your desk carefully.
  5. Extend the paper output tray to its maximum position.
  6. "Raise" the document cover at the top of the Canon MX920 printer.
  7. Take out the protective material and peel off the orange-colored tape from the Canon MX920 printer.
  8. Close the cover. Unpack the power cable and connect it to the electrical port at the back of the printer and power supply.
  9. Tap the ON key of the Canon MX920 printer. Choose your language and press OK.
  1. "Raise" the document cover. Find the ink cover and open it.
  2. Remove the protective wrappers over the ink tanks.
  3. Take out the orange-colored cap from the tanks. Insert the tanks into the respective slots. Make sure that the shade of the ink tanks matches the slots.
  4. Close the document and ink cartridge covers. Make sure that the output tray of the printer is opened.
  5. Open the cassette of the Canon MX920 printer. Load the plain sheets into the cassette. Pull the paper output support and output tray.
  6. The Canon MX920 printer prints an alignment sheet and aligns the ink tanks. Set up the software for the Canon MX920 printer and complete the unboxing process.

Canon Pixma MX920 Driver Download Guide

Before downloading the software for the Canon MX920 printer, set up its hardware. Configure the hardware of the printer by availing the guidelines provided in the previous topic.

Pixma MX920 Driver for Windows

Driver for Canon Pixma MX920 Printer
  • Printer driver file name: mp68-win-mx920-1_01-ea32_2.exe.
  • Driver file version: 1.01.
  • Size of the driver file: 38.54 MB.
  • Date of launch: 29th January in the year 2016.

Pixma MX920 Driver for Mac

Driver for Canon Pixma MX920 Printer
  • Driver file name: mcpd-mac-mx920-16_20_0_0-ea21_3.dmg.
  • Date of release: 2nd September in the year 2018.
  • Version of the driver file: 16.20.0.0.
  • File size: 15.88 MB.

Canon MX920 Manual Download

Manual for Canon MX920 Printer

Canon MX920 Driver Installation

  • The installation process can be carried out after downloading the software of the Canon MX920 setup.
  • Open the driver file and follow the guidelines to install the Canon printer software on your computer.
  • After installing the printer software, you can enjoy all the operations of the Canon MX920 printer.
how to load paper in canon pixma mx920

Canon MX920 Scanner Driver Download

There is no Canon MX920 scanner driver to be downloaded on the Windows operating system. Utilize the full feature software of the printer to execute the scan function. If your system is installed with the Mac operating system, click the Scanner Driver Download button to download the scanner software.

Canon MX920 Scanner Driver Download

Canon MX920 Wireless Setup Guidance

Canon MX920 Wireless Setup
  1. On the control panel of the Canon MX920 setup, tap the Menu key.
  2. Locate the WLAN Setup icon and select it by using the OK button.
  3. Highlight the Standard Setup option and press OK.
  4. Make sure that your router is in an active state.
  5. Choose the network name of the router when displays on the printer’s control panel.
  6. Specify the passkey of the network when the system prompts.
  7. Connect your computer to the same network of the router and complete the wireless setup.

Canon MX920 Print Photos Steps

  • Power up the Canon MX920 printer by using its power key.
  • Load suitable photo sheets into the input tray of the Canon MX920 printer.
  • Tap the Menu key on the control panel of the Canon MX920 setup.
  • "Highlight" the Photo option and press OK.
  • Select Online Album Print.
  • Choose the photo which you desire to print by using the directional buttons.
  • Set up the print settings like the Print Quality, Type, Print Quality, Border, Photo Fix, Print Date, and more.
  • Tap the Color key to begin the printing process.

Steps: Canon MX920 Scan to PC

  • Place your document for scanning either on the platen or in the ADF (Automatic Document Feeder) of the Canon MX920 printer.
  • Click the Go menu and click Applications.
  • Locate the Canon Utilities folder and double-click on it.
  • Click IJ Scan Utility. Select the Settings key.
  • Configure the settings like the Resolution, Paper Size, and more. Tap OK.
  • Choose the Photo or Document tile.
  • Begin the scan function by using the Scan key.

Canon MX920 Scan to PDF Guide

  • Raise the document tray of the Canon MX920 printer.
  • Keep your original document for scanning on the ADF (Automatic Document Feeder) of the printer.
  • Click the Finder menu on your Mac device which is connected to the Canon MX920 setup.
  • Select Applications and double-click on the Canon Utilities folder.
  • Click the Settings key.
  • Select the Document Scan option on the left pane.
  • Set up the Scan options like the Select Source, Color Mode, Paper Size, and Resolution.
  • Set the Data Format as PDF.
  • Tap OK after configuring the settings.
  • Select the Document tile to begin the scanning process.
  • Follow the guidelines on the display to complete the Scan to PDF function.
Canon MX920 Scan to PDF Guide

Canon MX920 Setup Troubleshooting

Fix any issues with the Canon MX920 printer by obtaining guidance from our well-qualified technical support team. The following topics have solutions for the offline, paper jam, not printing in black, will not scan, and not connecting to computer issues with the Canon MX920 printer.

Fixed: Canon MX920 Offline Error

  • Check if the power cable of the Canon MX920 printer is connected properly.
  • Disable the Firewall feature on your computer if enabled.
  • On the control panel of the Canon MX920 setup, tap Setup.
  • Select Device Settings --> LAN Settings --> Confirm LAN Settings --> WLAN Settings List.
  • Note down the IP address that displays on the screen.
  • On the display of your computer, click the Start.
  • Select Control Panel --> Printers.
  • Right-click on the name of your printer and select Properties.
  • Go to the Ports tab and select the Add Port key.
  • Select Standard TCP/IP Port --> New Port.
  • Specify the IP address which you have noted.
  • Click Next --> Finish.

Fixed: Canon MX920 Paper Jam Issue

  • Power off the Canon MX920 printer if it is turned on.
  • Disconnect the power cable of the Canon MX920 Setup.
  • Raise the document and ink covers.
  • Check for jammed sheets under the print head holder and remove them if any.
  • Do not tear the jammed sheets while removing it.
  • Close the covers which you have opened previously.
  • For more solutions to fix the paper jam issue with the Canon MX 920 printer, call our well-qualified techies.

canon MX920 won't Print Black

  • Turn on the Canon MX920 printer by using its power button.
  • Make sure that the paper tray of the Canon printer is loaded with compatible sheets.
  • Raise the paper output tray and its extension.
  • Tap the Tools / Wrench icon on the control panel of the Canon MX920 setup.
  • Find the Maintenance Menu using the directional key and select it.
  • Choose the Deep Cleaning option.
  • Confirm the process by selecting the Yes key.
  • Wait until the printer completes the cleaning process.
  • The printer takes around 180 seconds to complete the cleaning process.
  • Tap OK when the pattern print configuration message displays on the screen.

Fixed: Canon mx920 won't scan Issue

  • Make sure that the Canon MX 920 printer is powered on.
  • Reconnect your printer and computer.
  • Use the IJ Scan Utility software to execute the scan function of the printer.
  • Avail the recent version of the Scan Utility software from this site for free.
  • You can also obtain the Scan Utility software tool from the manufacturer’s site for free.
  • Make sure that you have placed your document for scanning on the platen or ADF properly.

Solved: Canon MX920 won't Connect to Computer

  • Check if the Canon MX 920 printer and computer are connected to the same network of a router or access point.
  • Disconnect the devices.
  • Wait for a few minutes and reconnect the devices.
  • Use a USB cable to connect the devices.
  • For more solutions to solve the Canon MX920 setup will not connect to computer problems, call our well-qualified technical experts.

Canon MX920 Print Head Removal

  • The following steps explain to reset the print head of the Canon MX 920 printer.
  • Open the output tray by using its sides.
  • Raise the document and ink covers.
  • Wait until the print head holder moves to its replacement position.
  • Wait until the holder settles at its place.
  • Remove the ink tanks from the printer by using their tabs.
  • Hold the Stop key on the control panel of the Canon MX 920 printer until the print head carriage slides to the replacement position.
  • Raise the inner cover and push it down. Pull the carriage tray.
  • Remove the print head from the Canon MX920 setup.
  • Take a new print head and unpack it.
  • Fix the print head into the Canon MX 920 printer and close the inner door.
  • Re-fix the ink tanks into their slots. Close the ink and document cover.

Canon MX920 PrintHead Cleaning Guide

  • Refer to the following steps to clean the print head of the Canon MX920 setup.
  • Open the Canon printer software on your computer.
  • Go to the Maintenance tab and click Cleaning.
  • Choose the ink group which you need to clean on the Print Head Cleaning dialog box.
  • Select Initial Check Items to check the selected options before the cleaning process.
  • Make sure that the Canon MX 920 printer is powered on.
  • Tap Execute. Now the printer starts to clean the print head.
  • Now the Nozzle Check dialog box appears on the screen.
  • Click the Print Check Pattern option.
  • Now the Canon MX 920 printer prints the Print Check Pattern sheet.
  • See the ink pattern on the sheet and check if the print head is cleaned properly.

How to Factory Reset Canon MX920?

  • Tap the Menu key on the control panel of the Canon MX920 setup.
  • Locate the Setup icon and select it by pressing the OK key.
  • Use the arrow keys to find the Reset option and select it.
  • Tap Yes when the panel displays the Reset Setting? message.
Canon MX920 factory reset
printer setup support