Complete Guidance for Canon MX492 Setup

  1. Remove the wrappers over the Canon Pixma MX492 printer box and open it.
  2. Take out the printer components from the box and keep them aside.
  3. Prefer a flat surface to place the Canon MX492 Setup.
  4. Remove the printer from the protective cover.
  5. Peel off the orange-colored tapes on the printer.
  6. Plug the power cable and turn on the Canon MX492 printer.
  7. Configure the settings on the control panel of the printer.
  8. Pull the input tray of the printer.
  9. Slide out the paper guides outward.
  10. Load suitable sheets in the tray and fix them by adjusting the paper width guides.
  11. Close the tray. Follow the instructions on the panel of the printer to complete the Canon Pixma MX492 printer setup.
Canon MX492 Setup

Canon MX492 Driver Download & Install

Install the software for the Canon MX492 printer once you download it. Click the Driver file to begin the installation process. Follow the prompts or guidelines on the screen for computerizing the driver.

Windows

Driver for Canon MX492 Printer

Mac

Driver for Canon MX492 Printer

Canon Mx492 User Manual Download

If you are in search of instructions to set up the hardware and software of the Canon MX492 setup, use its manual. Use the Manual Download button given below to download a softcopy of the manual for free.

User Manual for Canon MX492 Printer

How to Check Ink Levels in Canon MX492 Printer?

  • Open the Canon Pixma MX492 printer software which you have installed on your computer.
  • Click the Maintenance tab and select View Printer Status.
  • Choose the Ink Details option.
  • Now the ink level of the printer’s cartridge appears on the screen.

Steps: Canon MX492 Wireless Setup

  • Begin the wireless connection process by turning on the Canon MX492 setup.
  • Tap the Setup key on the panel of the printer.
  • Locate the Wireless LAN Setup option by using the arrow keys. Tap OK.
  • Hold the WPS key on your router.
  • Tap OK on the control panel of the printer within a few minutes.
  • Tap OK and press the Copy key.
  • The Canon MX492 printer gets connected to the router’s network successfully.

Canon MX492 Printhead Alignment Guidance

  • Open the Canon Pixma MX492 printer software on your computer.
  • Locate the Maintenance tab and select Print Head Alignment.
  • Load sheets in the paper tray of the machine.

Note : You can load A4 or letter-sized sheets in the tray. Locate the Align Print Head option and select it.

  • Now the Canon MX492 printer prints a print head pattern sheet.
  • Place the sheet on the platen glass of the printer and tap the Start button.
  • Now the printer begins to align the print head of the Canon MX492 setup.

Canon MX492 Print Double Sided Guidance

  • Make sure that you have launched the Canon Pixma MX492 printer software on your computer.
  • Ensure that the paper tray is loaded with print media.
  • Open the software and locate the Page Setup tab.
  • Select the tab and click Duplex Printing (Manual).
  • Choose the Normal-Size, Fit-to-Page, Scaled, or Page Layout option in the Page Layout list.
  • Set the other settings if needed.
  • Do not forget to configure the Margin Width.
  • You can use the Specify Margin option to set the margin width.
  • After setting the configurations, tap Start Printing to print on double-side of the loaded sheets.

How to Print Envelope in Canon MX492 Printer?

  • Open the access door present at the front of the Canon Pixma MX492 printer.
  • Pull the cassette and slide the guides outward.
  • Load enough envelopes in the center of the cassette with their printable side facing down.
  • After placing the envelopes, align them by using the guides.
  • Push the cassette into the Canon MX492 setup.
  • Tap OK on the control panel.
  • Configure the envelope size that you have loaded in the tray.
  • Pull the output support from the output tray.
  • Also, open the output tray extension.
  • Open the Canon Pixma printer software on your computer to select the Media Type option.
  • Locate the Quick Setup tab and select it.
  • Choose Envelope under the Commonly Used Settings option.
  • Configure the print settings to begin the printing process.

How to Print Photos in Canon Pixma MX492 Setup?

  • Firstly, load photo paper in the input tray of the Canon MX492 setup.
  • Extend the cassette of the printer to its maximum limit.
  • Load photo sheets in the center of the cassette and adjust them by using the guides.
  • Make sure that you load sheets with their printable side facing down.
  • Close the cassette. Tap OK on the printer’s panel.
  • Configure the settings on the panel.
  • Open the extension of the output tray.
  • Send the print job for printing to the printer from your computer.
  • se the Print option to print the loaded photo sheets.

Steps: Canon Mx492 Print Labels

  • Open any word application on your computer.
  • Some of the word applications are Microsoft Word, OpenOffice Writer, and WordPad.
  • Design the label for printing from the Canon MX492 setup.
  • Keep the label for printing in the paper tray of the printer.
  • Go to the File menu on your computer and select the Print option.
  • Check if the print configurations are configured correctly.
  • Tap OK to begin the printing process.

How to Scan on Canon MX492 Printer?

  • Make sure that the recent version of the Canon Pixma MX492 printer software is installed on your computer.
  • Click the Start menu on the display of your Windows system.
  • Go to Programs and select Canon Utilities.
  • Click the IJ Scan Utility option.
  • Keep your document for printing on the scan surface or the document feeder of the Canon MX492 setup.
  • Configure the settings like the Auto, Photo, Custom, Stitch, and Document.
  • Tap the Print option to begin the printing process.

Canon MX492 Scan Multiple Pages Guidance

  • Keep your original document for printing in the ADF (Auto Document Feeder) of the Canon Pixma MX492 setup.
  • On your Mac device, click the Go menu.
  • Choose Applications to double-click the Canon Utilities folder.
  • Click Scan Utility --> Canon IJ Scan Utility2.
  • Click the Settings key.
  • Locate the Document Scan option on the left pane and set the settings. Tap OK.
  • Tap the Document tile on the IJ Scan Utility screen.
  • Follow the guidelines for loading your document for scanning and tap OK to begin the scan function.
How to Scan Multiple Pages on MX492

Canon MX492 Setup Troubleshooting Guidance

Fix any issues that arise with the Canon Pixma MX492 printer by availing assistance from our well-qualified technical support team. Also, find solutions for some problems with the Canon Pixma MX492 printer in the following topics.

Fixed: Canon Pixma MX492 Not Connecting to Wifi Issue

  • Tap the Setup icon on the panel of the Canon Pixma MX492 printer.
  • Locate the Device Settings option to select it.
  • Select Wireless LAN Setup.
  • Ensure that your router is switched on and in an active state.
  • Hold the WPS button on the router for a few seconds.
  • Wait until the Canon Pixma MX492 printer gets connected to the network of the router.
  • The Connected message on the control panel of the Canon Pixma MX492 setup indicates that the connection is established successfully.

Resolved: Canon MX492 Setup not Printing Issue

  • Examine the connection between your Canon Pixma MX492 printer and computer.
  • Make sure that the ink cartridges of the Canon Pixma printer are loaded correctly.
  • Also, check if the paper tray of the printer is loaded with compatible sheets.
  • For more solutions to fix the Canon Pixma MX492 printer not printing problem, reach our well-qualified techies.

How to fix Canon Pixma MX492 not Scanning Issue?

  • Examine if the Canon Pixma MX492 printer is powered on.
  • Reconnect the Canon Pixma printer and computer.
  • Check if the scanner components are not damaged and working properly.
  • Restart the devices and check if the Canon Pixma MX492 printer not scanning issue is solved.

How to Reset Canon Pixma MX492 Printer?

  • Power up the Canon Pixma MX492 printer by using its power button.
  • Locate the Setup menu by using the navigation keys to select it.
  • Choose the Reset Settings option and click Device Settings.
  • Now the Canon MX492 setup resets to its default settings.
printer setup support