Canon Imageclass Mf452dw Unboxing Setup

If you want to use a new printer without any trouble, you must complete the initial setup in the first place. However, setting up a new printer without prior experience is not that hard. So, if you are looking out to set up your Canon imageCLASS MF452dw printer for the first time? No worries, you are on the right site. Just follow the below instructions carefully to complete your printer setup.

Canon Imageclass Mf452dw Unboxing Setup

Hardware Setup

Contents Inside The Box

First, check if all the below contents are available inside the printer package.

  1. Canon imageCLASS MF452dw printer
  2. Canon Genuine Toner Cartridge (Black)
  3. Power Cord
  4. Telephone Cable
  5. Starter Guide
  6. User Software DVD-ROM
  7. Warranty Card

Unpacking The Printer

  1. First, start by unboxing the printer package.
  2. Remove the power cord, starter guide, and all the remaining items from the box.
  3. Gently lift the printer out from the package.
  4. Discard the foam packing materials and remove the printer from the plastic bag.
  5. Next, dispose of all the protective tapes around the Canon imageCLASS MF452dw printer.
  6. Lift the scanner lid and discard the protective sheet from the scanner glass.
  7. Close the scanner lid.

Loading The Paper

  1. Pull out the input paper cassette from the printer.
  2. Now, slide the paper width guide as far as possible.
  3. Load the sheets into the input paper tray.
  1. Do not load the sheets more than the maximum limit.
  2. Adjust the paper width guide to the edges of the stack.
  3. Insert the input paper cassette into the printer.

Installing The Toner Cartridges

  1. The Canon imageCLASS MF452dw printer comes with preinstalled toner cartridge (Black).
  2. So, you don’t need to install it while setting up your printer for the first time.
  1. But, you need to replace the toner when it runs low on ink.

Connecting The Power Cord

  1. Plug the power cord into the back of the printer and a wall outlet.
  2. Hit the Power button to turn on the printer.
  3. Now, select your language on your printer screen.
  1. Choose your country or region.
  2. Next, set the current date and time.

You can complete the printer’s unboxing and hardware setup by following the above instructions.

Canon Imageclass Mf452dw Driver Download

If you wish to connect your printer to your computer, you need to download and install the driver that supports your printer. The driver will allow your printer to communicate with other devices. It will help your printer accept the data sent from the devices and complete the required tasks. You can conveniently download the compatible driver by following the instructions below.

  1. First, open the default browser on your computer and go to the Canon printer’s official support page.
  2. Here, type your printer name in the search bar at the top of the page.
  3. Otherwise, browse your printer model name by selecting the Printers section from the Product Type menu.
  4. In the next window, choose your device name from the list.
  5. Now, select your printer’s model number from the list.
  6. In the next window, click on the Drivers & Downloads button at the top of the page.
  7. Below the Drivers & Downloads category, choose your operating system with the version from the drop-down list and select your language.
  1. Choose the respective driver file below the Recommended Drivers section and click the Select button.
  2. Click Download below the selected driver file.
  3. Now, the driver file will start to download on your computer.
  4. After completing the driver download, launch the executable file.
  5. Follow the on-screen prompts and finish the driver installation on your computer.

With all the above instructions, you can download the printer driver on your computer.

Canon Imageclass Mf452dw Driver Install

To install the Canon imageCLASS MF452dw printer driver, you can either use the installation CD or run the downloaded driver file on your computer. It includes a simple step to install and complete the printer setup using the driver installation CD. Perform the below steps to install the driver on your computer.

  1. First, check if your printer is turned on.
  2. If you have the driver installation CD that came with your printer package, insert it into your computer’s CD-ROM drive and start the installation process.
  3. In case you have downloaded the driver from the official support page, launch the executable file and start the installation process on your computer.
  4. In the Setup Wizard window, select your language from the drop-down list and click the Next button to proceed.
  1. Now, accept the CANON SOFTWARE LICENSE AGREEMENT and click the Yes button.
  2. Select the connection method you want to use and click the Next button.
  3. Perform the on-screen instructions on your printer screen to complete the connection setup.
  4. Select the drivers you wish to install on your computer and click the Next button.
  5. Follow the on-screen prompts and complete the printer driver installation.

You can complete the Canon imageCLASS MF452dw printer driver installation on your computer by performing the above instructions.

Canon Imageclass Mf452dw Wireless Setup

If you want to connect your printer to the network, use the wireless setup method. It is a quick and easy way to connect your machine. Using the wireless feature, you can connect your printer to your computer or other devices without a cable.

Using The Ssid Method

  1. First, check if your router supports the WPS push button.
  2. Make sure to turn on your printer.
  3. Now, go to the Canon imageCLASS MF452dw printer’s control panel and tap the Home icon.
  4. Press the Menu button and select the Preferences option.
  5. Here, tap on the Network option.
  6. If you see the System Manager Login screen, enter your System Manager ID and PIN into the respective fields. Then, press the Log In button.
  7. Select the “Wireless LAN Settings” option from the list.
  8. Tap the Yes button to enable the wireless LAN process.
  9. Now, the printer will take some time to configure the settings.
  10. Tap the OK button.
  11. Select the “SSID Settings” option below the “Wireless LAN Settings” category.
  12. Tap the Select Access Point option on the printer screen and choose your Wi-Fi network name from the available network list.
  13. Enter your network password and tap the Apply button on the on-screen keypad.
  14. Tap on the Yes button to confirm the connection.

Using The Wps Push Button Method

  1. Check if the printer is turned on.
  2. Tap the Home icon on the Canon imageCLASS MF452dw printer’s control panel.
  3. Search for the Menu button on the home screen and select it.
  4. Choose Preferences from the list.
  5. Here, touch the Network option on the printer screen.
  6. If the Login screen prompts, enter your System Manager ID and PIN into the respective fields.
  7. Select the Wireless LAN Settings option on the printer screen.
  8. Tap the Yes button to enable the wireless LAN process.
  9. Choose the WPS Push Button Mode option from the list.
  10. Tap the Yes button to confirm.
  11. Now, press your router’s WPS button.
  12. Wait until you see the Connected message on the printer screen.

Canon Imageclass Mf452dw Usb Setup

Using the USB connection setup, you can easily connect your printer to your device and complete the installation. To do so, perform the below instructions carefully.

  1. Make sure to turn on your printer.
  2. Now, connect your printer and computer using a USB cable.
  3. Click on the Windows icon at the bottom-left corner of your computer’s main screen.
  4. Type Control Panel into the search bar at the bottom of the window.
  5. Select the Control Panel option from the search results.
  6. Here, choose the Hardware and Sound option.
  7. Select the Devices and Printers option from the list.
  8. Next, click the Add a printer option.
  9. Select your Canon imageCLASS MF452dw printer from the available list and click the Next button.
  10. The printer installation window will appear on the screen.
  11. Now, start to install your printer on your computer.

Canon Imageclass Mf452dw Print Setup

  1. Make sure to turn on your printer.
  2. Ensure to load the paper into the rear tray or the paper cassette.
  3. On your computer, open the document that you want to print.
  4. Choose the File