Canon ImageClass MF4350d is a multifunction monochrome laserjet printer. It can perform all printer operations like print, scan, copy, and fax. Read the below steps for the Canon ImageClass MF4350d setup.

Step-1: Unpack the printer

  1. Take out the printer from the carton and place it on a flat surface.
  2. Look for the other printer accessories such as document feeder tray, toner cartridge, power cord, telephone cable in the box and keep them safe for later use.
  3. Remove all the packaging materials from the printer.

Step-2: Install the toner cartridge

  1. Unpack the toner cartridge and gently shake it multiple times to distribute the toner in it.
  2. Place the cartridge on a table and pull out the tab to unseal it.
  3. Next, use both hands to hold the front side operation panel and lift the scanning platform.
  4. Stop raising the scanning platform when it stops with a clicks sound.
  5. Hold the small gripper at the front right side and open the toner cover.
  6. Now, take the toner cartridge by its handle and carefully Canon Imageclass mf4350d Setup install it inside the printer.
  7. Again hold the small gripper and close the toner cover.
  8. Following that, lower the scanning platform.

Step-3: Feed paper in the cassette

  1. Slowly pull down the paper feeding tray and remove the dust cover from the inside.
  2. Move the paper guide rails outwards and then slide the paper guides according to the paper size you are feeding.
  3. Neatly arrange the paper in the paper feeding tray with its print side facing up.
  4. Shift the paper guide rail to align with the paper size.
  5. Now, fix the dust cover inside the printer.
  6. Take the document feeder tray provided with the printer and attach it to the document feeder.

Step-4: Power connection

  1. Use the power cord to connect to the printer’s power socket.
  2. Connect the other end of the power cord to a wall outlet.
  3. Press the main switch on the printer’s side panel to turn it on.
  4. Once the printer display turns on, if you see any error message, again arrange the printer part that appears in the error message.

Step-5: Fax connection

  1. Connect the telephone line cable from the wall jack to the telephone line jack on the printer’s rear side.
  2. Attach a telephone to the printer’s external device jack to use it as an answering machine.
  3. Configure the fax settings on the operational panel.


Canon Imageclass mf4350d Driver

You should Canon Imageclass mf4350d Setup install the printer driver on your computer for easy printer operation management. 

  1. Enter the printer model name in the search box on our page and choose the OS version.
  2. Click the driver download link to download the printer driver.
  3. Otherwise, visit the official Canon website on a web browser and go to the printer’s support page.
  4. Click the Drivers & Downloads tab and select the Operating System from the drop-down menu.
  5. Under Drivers, select the driver and click the Download button.


User Manual for Canon Imageclass mf4350d Setup

The user manual booklets are provided during the printer purchase, and they are available online in PDF format as well.

  1. Open a browser window on the computer and go to the official Canon webpage.
  2. Search for the printer model using the search icon and go to its support page.
  3. Select Manuals, click the Select button of the manual you want to download, and continue with the download.


Installing the printer driver on the computer helps to connect the printer to a computer.

  1. Download the printer driver and open it to start the installation. Or else, insert the installation CD and open the setup file to run it.
  2. When the setup welcome screen appears, click the Next button.
  3. Carefully read the Canon license agreement and click Yes to accept it. Then, proceed with the installation.
  1. On the following screen, choose a connection type and click Next.
  2. Continue with the guided instructions to complete the driver installation.
  3. Once the Canon Imageclass mf4350d Setup, installation is complete, click Exit.


Whenever the toner level is very low, there is a need to replace it with a new one.

  1. Raise the scanning platform by holding the front side of the operational panel until you hear a click sound.
  2. Using the gripper, lift the toner cover to open it.
  3. Remove the used toner cartridge from the printer.
  4. Take out the new cartridge and then rock it slowly to distribute the toner evenly.
  5. Place it on a stable surface and pull out the tab to unlock the seal.
  6. Hold the cartridge by the handle and insert it inside the printer.
  7. Make sure the toner cartridge fits properly and then close the toner cover.
  8. Following that, lower the scanning platform.


  1. Once you connect the telephone cable from the wall jack to the printer’s telephone line port, press the Menu button on the operational panel.
  2. Use the navigation keys to highlight Fax Settings and press OK to select it.
  3. Next, select User Settings and choose Unit Telephone.
  4. Enter your Fax number, including the spaces, and press OK.
  5. Now, you have to select Unit Name and enter a name for your Fax machine.
  6. Press the Stop or Reset button to return to the standby mode. 


Scan using operational panel

  1. Connect the scanner and the computer using a USB cable.
  2. Make sure that you have installed the printer driver on the computer before starting to scan.
  3. Open the scanner document cover and place the document on the platen glass.
  4. Press the Scan button and use the navigation keys to view the USB Scanning menu on the display panel.
  5. Now, press the Start button to start scanning.
  6. If the screen prompts to select a scanning tool, choose “MF Toolbox Ver4.9.”

Scan using a network-connected computer

  1. You have to install the Network Scanner driver on the computer to perform this scan.
  2. After placing the document on the scanner, press the Scan button and then choose Network Scanning.
  3. Launch the Network ScanGear tool on the computer and configure the scan settings on the main screen.
  4. Click Scan to start scanning.


  1. The latest printer firmware is available on the official Canon website under Firmware, which is under Drivers & Downloads.
  2. Download the printer firmware and save it on the computer.
  3. On the operational panel, press Menu, select Tab Selection, and finally choose Settings/Adj.
  4. Next, use the up and down navigation keys to highlight Printer Info and press OK to select it.
  5. Select System Info and view the printer’s firmware version.
  6. Ensure that the printer and computer are connected.
  7. Now, open the firmware file to unzip it and then install the firmware update tool.
  8. Continue to update the firmware and again check if the firmware version has been changed.


When the printer faces an issue, the error message related to the issues is displayed on the printer’s display panel. Try to resolve the error by referring to the printer’s user manuals. If you cannot fix the Canon Imageclass mf4350d Setup problem, contact our technical team for more support.


If you find that the printer is in the offline mode, then try out the below steps to bring it back online.

  1. Check the USB cable connection and tighten the cable ends to secure the connection.
  2. Check the power connection to the printer and replace the power cord if required.
  3. For Windows computer, open Devices and Printer in the Settings window to view all the connected printers. Right-click the printer name and disable Use Printer Offline or enable Use Printer Online.


If a paper jam occurs inside the Canon printer, follow the below steps to clear it.

  1. Take out the dust cover from the paper feeding tray and then remove the paper in the tray.
  2. Open the printer’s rear cover, raise the scanning platform, and open the printer cover.
  3. Hold the toner cartridge using its handle and slowly remove it.
  4. Now, you can find the paper stuck inside. Use both the hands to remove the paper.
  5. If you find the paper jammed in the rear side, carefully take it out.
  6. Insert the toner cartridge inside the printer and see that it is set properly.
  7. Following that, close the printer cover, scanning platform, and rear cover in the same order.


  1. Make sure to use the latest MF scanner driver on the computer. If you are using an old one, uninstall it and download the new MF driver version. Perform the installation and retry to scan.
  2. If the driver installation has not been done properly, the scanner won’t respond. Remove the corrupted printer driver and install the new printer driver.
  3. If the connection between the scanner and computer is not secure, the scanner does not work. Tighten the USB cable and check the network settings.


Hard resetting the printer would clear all the printer settings and restore it to the default factory settings.

  1. Press the down arrow key on the operational panel and select Reset.
  2. From the reset options, highlight the Soft Reset menu and press the OK button until you see the “Hard Reset” message.
  3. Release the button and hold it for another 3 seconds.
  4. If the “Hard Reset” message appears, it means the hard reset has been completed.


The following solutions will help if you are facing problems with the Fax setup.

  1. Canon Imageclass mf4350d Setup Install the printer driver properly on the computer because the incorrect installation might cause the fax issue.
  2. Check the telephone line cable connection and secure the ends to fix the problem.
  3. Open the Fax settings and verify if they are correct. Also, check the entered Fax numbers.
printer setup support