1. Unbox the printer and take out all the printer accessories. Accessories present inside the box:
2. Canon genuine toner cartridges(included with the printer)
3. Power cord, Phone cable, Software CD/DVD-ROM, Getting Started Guide, Warranty Card
4. Removeall the protective materials and packing tapes from the inside and outside of the Canon imageCLASS D1650 printer.
5. Pull the paper drawer out from the printer, insert some plain paper with their print side facingdown in the paper drawer, and push the paper drawer back into the printer.
6. Note: The paper should not be loaded more than the maximum mark.
7. Connect the power cord between the rear side of the printer and the power source.
8. Install the printer software on your computer.
9. Make sure to establish a proper connection between the printer and the computer.

CANON IMAGECLASS D1650 DRIVER INSTALLATION

Once done with downloading the Canon imageCLASS D1650 printer driver from the manufacturer website, install it on your Windows computer by performing the simple steps given here.

1. Click the Next option when you see the ‘Welcome to the Setup Wizard for the MF drivers’ message on the screen.
2. If needed, read and review the content in the License Agreement window.
3. To accept the Canon software’s license agreement, select the Yes option.
4. As soon as the ‘Select the Type of Connection’ window opens, select the radio button beside your preferred connection type and click the Next option.
5. Continue with the on-screen guidelines until you see the ‘Print Test Page’ window.
6. If you wish to print a test page, select the Canon imageCLASS D1650 printer and click the Exit option.
7. Use the following steps we can execute the Canon imageCLASS D1650 setup.

CANON IMAGECLASS D1650 SCANNER DRIVER

1. The manufacturer recommends the user to install the MF Drivers file for the Canon imageCLASS D1650 printer.
2. This comprehensive file contains the software that are listed here.
3. Generic Plus UFR II
4. Generic Plus PCL6
5. Generic Plus PS3
6. Generic FAX
7. ScanGear
8. You can also use the MF Scan Utility to set up the scan settings on your computer.
9. You have to download and install the recommended driver file to perform the Canon imageCLASS D1650 printer functions on your computer.

CANON IMAGECLASS D1650 WIRELESS SETUP

You can set up the Canon imageCLASS D1650 printer over a wireless network using the WPS Push Button mode, WPS PIN Code mode, or selecting a wireless router from the control panel.

Here are the steps to set up the Canon imageCLASS D1650 printer over a wireless network using the control panel.

1. On the home screen of the Canon imageCLASS D1650 printer, go to Menu and select the Preferences option followed by the Network option.
2. After selecting the Wireless LAN Settings option, you will see a prompt on the LCD panel of the printer.
3. To continue with the wireless setup, select the OK option.
4. Select the SSID Settings option followed by the Select Access Point option.
5. The LCD panel of the printer will show a list of available wireless networks.
6. Choose the SSID or the network name of your wireless router and select the Next option.
7. Now, you have to type the password of the wireless router and select the Apply option followed by the Yes option.
8. Check if the Connected message is displayedon the Canon imageCLASS D1650 printer’s LCD panel.
9. If so, itindicates that the wireless network connection has been established successfully.
10. Using these steps we can execute the Canon imageCLASS D1650 setup.

CANON IMAGECLASS D1650 PRINT SETUP

To print from your computer, you have to download and install the latest version of the Canon imageCLASS D1650 printer driver.

1. Make sure that the printer and the computer are connected to each other.
2. Open a document that you want to print and launch the Print dialog window on the screen.
3. Choose the Canon imageCLASS D1650 printer and click the Preferences or Properties option.
4. In the Printing Preferences dialog window, click the Basic Settings tab and fill the required fields.
5. Once done, click the OK option followed by the Print or OK option.
6. This will print the document on the Canon imageCLASS D1650 printeraccording to the selected print settings.

CANON IMAGECLASS D1650 OFFLINE

1. When you see the Printer is Offline message on the computer screen, proceed with the following instructions to resolve the
2. Check if the Canon imageCLASS D1650 printer is powered up.
3. If not, hold the Power button to turn on the printer.
4. Also, check if the connection between the printer and your computer is secure at both ends.
5. Change the printer status from offline to online.The steps for this are as follows:

Step 1

1. Windows 10 - Select the Settings option from the Start menu and click the Select Devices option.
2. Windows 8 - Once you navigate to the Start menu, choose the Settings option.
3. Click the Control Panel option and then select the Hardware and Sound option followed by the Devices and Printers option.
4. Windows 7 - You have to select the Devices and Printers option from the Start menu.
5. Windows Vista - Select Control Panel -> Hardware and Sound.
6. Windows XP - Click the Start icon and select Control Panel -> Printers and Other Hardware -> Printers and Faxes.

Step 2

1. Search for the Canon imageCLASS D1650 printer, right-clickon its icon and select the Use Printer Online option.
2. This will change the printer status to online.
3. By using these steps we can execute the Canon imageCLASS D1650 setup.

CANON IMAGECLASS D1650 PAPER JAM ERROR

If the Paper Jammed message appears on the LCD panel of the Canon imageCLASS D1650 printer, select the Next option and proceed with the following instructions to resolve it.

Paper jammed in the feeder unit:

1. Open the Canon imageCLASS D1650 printer’s feeder cover, remove theoriginal document, and raise the feeder tray.
2. Pull the original document and then close the feeder cover.
3. Also, remove the jammed paper from the lower sideof the printer’s feeder unit.
4. Place the original document again.
5. Check if the error has been resolved. If not, try to remove the jammed paper inside the Canon imageCLASS D1650 printer as per the steps given here.

Paper jammed inside the printer:

CANON IMAGECLASS D1650 DEFAULT PASSWORD

You can set a new password on the Canon imageCLASS D1650 printer as per the steps given below.

1. Go to Menu on the home screen of the printer and select the following options.
2. Management Settings
3. User Management
4. System Manager Information Settings
5. System Manager ID and PIN
6. Mention the Manager ID and its password. If prompted, enter the password again for confirmation.
7. Finally, select the Apply option.
8. By utilizing these steps we can execute the Canon imageCLASS D1650 setup.