Brother PT-2100 Label Maker Guidance

  • Remove the wrappers over the Brother PT-2100 label printer box and open it.
  • You can find the PT-2100 labeler with its components.
  • The components are the TZ tape cassette, CD-ROM, USB cord, AC adaptor, user’s manual, and software installation guide.
  • "Open" the battery door of the PT-2100 printer.
  • Remove the batteries from their slots if present. Close the door.
  • "Plug" one end of the AC adaptor into the port of the printer which is marked as DC IN 9-9.5V.
  • "Connect" the other terminal of the printer to a power supply directly.
  • "Remove" the cover of the tape cassette.
  • "Check" for cardboard stopper on the cassette and remove it.
  • Tighten the ribbon of tape if it is loose.
  • "Make sure" that the end of the tape is not bent and passes through its guide.
  • "Open" the door of the tape compartment and fix the tape into it.
  • Make sure that the end of the tape should face the tape exit slot. Press the cassette firmly until it produces a click sound.
  • Close the cover of the tape compartment.
  • Press the power key of the Brother PT-2100 Label Maker to turn it on.
Brother PT-2100 Label Maker

Brother PT-2100 Driver Download

https://support.brother.com/g/b/downloadhowto.aspx?c=as_ot&lang=en&prod=2100eas&os=10010&dlid=dlfp001935_000&flang=178&type3=347

Windows

  • The driver in the Driver Download button includes all the Brother PT-2100 label maker related software and documents.
  • The software was released on 7th November in the year 2017.
  • The version of the driver is 1.0.004.
Driver for Brother PT-2100 Windows

Additional Brother PT-2100 label printer drivers

  • Printer Driver Information Cleanup Tool,
  • P-touch Editor 5.x,
  • P-touch Update software.

You can obtain the supplementary software from the manufacturer’s site for free.

Mac

If you are Mac user, utilize the built-in printer software to enjoy the functions of the Brother PT-2100 label printer.

Brother pt-2100 manual download

driver for Brother PT-2100 Printer

Use the Manual Download button to download the manual of the Brother PT-2100 Setup.

Brother PT-2100 Driver Installation

  • The below provided steps explain how to install the Brother PT-2100 Label Maker on the Windows operating system.
  • Switch on your computer and log in as an Administrator.
  • Download the Brother PT-2100 printer software on your computer by using the Driver Download button given on this page.
  • Open the driver file after downloading it.
  • Choose the desired language and select Standard or Custom.
  • Go through the license agreement and accept the terms & conditions by ticking the checkbox on the screen.
  • Specify the User Name & Company Name if required. Click Next.
  • Choose the destination to install the Brother PT-2100 printer driver. Tap Next.
  • Continue the procedure by pressing the Next button.
  • Power on the Brother PT-2100 label printer when the Connect your P-touch to the PC by Using a USB cord message appears on the screen.
  • Connect the square-shaped end of the label printer’s USB cord to the USB port of the labeler and the other end to the PC.
  • Once the labeler is detected, the driver will get installed automatically.
  • Register your printer and complete the Brother PT-2100 driver installation process.

How to Connect Brother PT-2100 to PC?

  • Connect your Brother PT-2100 Setup and computer by using a USB cable.
  • Hold the Wi-Fii button on the control panel of the printer for a second.
  • Open the label printer software on your computer.
  • Go to Communication Settings and select Infrastructure and Wireless Direct in the General tab.
  • Set the Communication Mode as Infrastructure under the Wireless Settings option. Click Apply to configure the settings.
  • Close all the windows on your computer.
  • Open Devices and Printers and click Add a Printer.
  • Select Add a Network, Wireless or Bluetooth Printer and click Next.
  • Choose The Printer that I Want Isn’t Listed and click Next.
  • Click Add a Printer Using a TCP/IP Address or Hostname and tap Next.
  • Set the Device Type as TCP/IP Device.
  • Specify the IP address of your Brother PT-2100 label printer.
  • Follow the instructions and tap Finish to configure the Wi-Fi setup successfully.

Brother PT-2100 Wifi Setup Guidance

The Wi-Fi connection method is the easiest way to connect the Brother PT-2100 printer and computer. Refer to the following topic to connect the Brother label printer to computer wirelessly.

Brother PT-2100 Print Vertical Guide

  • Tap the Text button on the front panel of the Brother PT-2100 Label Maker
  • Use the up or down arrow key to select the Style option.
  • Select the VRT option.
  • Tap OK or Enter key to set the configurations.

Brother PT-2100 Firmware Update Guidance

  • Update the software of the Brother PT-2100 setup using the firmware update tool.
  • You can obtain the tool by clicking the button present below for free.
  • The provided software tool is compatible with the Windows 7 and later versions.
Firmware Driver for Brother PT2100

Double-click the downloaded file & follow the instructions to update the firmware of your Brother PT-2100 setup.

Brother PT-2100 Printer Troubleshooting Guidance

Fixing the issues with the Brother PT-2100 Label Maker is not rocket science. Solve any issues with the printer by availing assistance from our well-qualified technical support.

Fixed: Brother PT-2100 Cutter Error

  • Turn off the Brother PT-2100 Label Maker by using its power key.
  • Raise the door of the tape compartment and remove the cassette tape from the printer.
  • Check the cassette tape compartment where the tape comes out of the machine.
  • Remove the piece of labels or other foreign materials if any.
  • Insert the cassette tape back into the printer and close the door.
  • Power on the Brother PT-2100 printer by force pressing its power button.
  • Tap the Feed/Cut key. Now the label printer feeds and cuts off an inch blank label.

Solved: Brother PT-2100 Offline

  • Make sure that the tape size of the tape cassette suits the model of the label machine.
  • Reinstall the Brother pt-2100 label printer software on your computer.
  • Examine the power connection of the Brother label printer.
  • For more solution to troubleshoot the offline problem with the Brother PT-2100 setup, call our technical experts.

Brother PT-2100 not Printing Guidance

  • Make sure that the tape cassette of the Brother PT-2100 label printer is inserted correctly.
  • Also, ensure that the tape width of the cassette suits the model of your label printer.
  • Use the latest version of the Brother PT-2100 printer software to execute its functions.
  • You can obtain the driver by using the Driver Download button on this page.

How to Change Font Size on Brother PT-2100?

  • Tap the Font key on the control panel of the Brother PT-2100 Label Maker.
  • Use the arrow keys to find the Current Size Selection option.
  • Change the size by using the directional buttons.
  • Tap OK to configure the settings.
printer setup support