Brother MFC-L2710DW Setup Support

The Brother MFC-L2710DW Setup performs operations like printing, scanning, copying, and faxing. The printing speed of this printer is high when compared to other models. Once you purchase the Brother MFC-L2710DW printer from the manufacturer, you can begin the setup process. This page has complete guidelines to configure the hardware and software of the printer. You can also avail instant guidance from our technical for setting up the printer or solving any issues with it.

Remove the drum unit from the printer.
Take off the packing materials from the drum unit and fix it back into the printer.
Load the paper tray of the printer with enough sheets.
Connect the AC power cord to the corresponding ports of the printer and electricity outlet directly.
Set up the software of the Brother MFC-L2710DW Setup printer and complete the process.

Brother MFC-L2710DW Driver Install

• You can begin the Brother MFC-L2710DW Setup printer driver installation process after downloading it.
• The procedure varies depending on the OS version of a computer or laptop.
• Double-click the driver file and start the Brother MFC-L2710DW installation process.
• Accept the Terms and Conditions by ticking the checkbox next to it.
• Configure the connection between your Brother MFC-L2710DW printer and computer based on their specifications.
• Carry on with the instructions on the screen and complete the Brother MFC-L2710DW installation.

How to Connect Brother MFC-L2710DW Printer to Wifi

• Note down the network name (SSID) and passkey of the router to which you are going to connect your Brother MFC-L2710DW Setup machine.
• Tap the Menu or Settings button on the front panel of the printer.
• Press Network --> WLAN.Find the Setup Wizard option.
• When WLAN Enable? Message displays on the screen, tap the Yes button.
• Proceed with the process by tapping the OK button.
• The printer finds the network name of your router.
• Choose the SSID of your router and provide its password when the system prompts.
• Hope you have downloaded the machine’s software on your computer.Install the printer software.
• Choose the Wireless option in the Connection Type screen.
• Follow the guidelines and complete the wireless setup.

Brother MFC-L2710DW Remove Setup Password

• On the display of the Brother machine, tap the Settings icon.
• Select All Settings --> Print Reports --> Network Configuration.
• Now the Brother MFC-L2710DW Setup printer prints a Network Configuration report.
• Note down the IP address mentioned in the report.
• On your computer, open a browser.
• Type the IP address in the search field.
• Provide the password of your machine on the Login box.
• Click the Administrator tab.
• Find User Restriction function at the left pane and click it.
• Click the radio button next to Off.
• Now the Brother MFC L2710DW printer is not secured with a password.

Brother MFC-L2710DW AirPrint Setup

• The AirPrint feature is used to enjoy the functions of the printer from your Apple or Mac device.
• Make sure that the Brother MFC-L2710DW Setup printer and computer are connected to the same network of an access point or router.
• Open the document or image for printing on your Apple device.
• Find the Share icon on your device and select it.
• Make sure that the name of your printer is selected.
• Tap the Print option and start to print from your Apple device.

Brother MFC-L2710DW Cloud Print Setup

• Start the Cloud print setup by connecting your Brother MFC-L2710DW printer and computer to the same network of a router or access point.
• Ensure that the date & time are configured correctly on your printer.
• Make sure that you have a Google account.
• It is not possible to print encrypted PDF files.
• So, you have to decrypt the encrypted files for printing.
• Register your Brother MFC-L2710DW Setup printer in Google Cloud Print
• Open the Chrome browser on your computer.
• Go to Settings --> Show Advanced Settings.
• Find the Manage link under Google Cloud Print and select it.
• You can find the name of your printer.
• Click the Register button near the printer’s name.
• When a confirmation screen displays, tap the Register button.
• Tap OK on the printer’s panel.

How to Reset Toner on Brother MFC-L2710DW

• Draw the access cover at the front of the Brother MFC-L2710DW Setup printer.
• Tap the STOP / EXIT and CLEAR buttons at the same time.
• Press the Clear button again.
• Now Reset Menu appears on the screen.
• Highlight the TNR-STD option using the down directional key and tap OK.
• Tap the UP arrow and confirm the toner reset process.

How to Reset Drum on Brother MFC-L2710DW

• It is mandatory to turn on the Brother MFC-L2710DW printer to begin the drum reset process.
• Make sure that the access door at the front of the printer is closed.
• Press the OK and up arrow keys at the same time.
• Tap the Up arrow key to reset the drum unit of the Brother MFC-L2710DW Setup printer.

How to Replace Toner on Brother MFC-L2710DW

• Press the power button and begin the toner cartridge replacement process.
• Open the access cover at the front of the printer.
• You will find the toner cartridge and drum unit assembly. Remove them from the printer.
• Find the green-colored lock lever and push it down to remove the toner cartridge from the drum unit.
• Take the new cartridge which you have purchased from the manufacturer’s store.
• Unpack the cartridge. Peel off the protective cover from it.
• Fix the new toner cartridge into the drum unit.
• Once the toner cartridge is fixed properly, it produces a click sound. So, gently push the cartridge until you hear a click sound.
• You can find a corona wire inside the drum unit. Clean the wire by sliding the green-colored tab from left to right and vice versa.
• Fix the drum unit with toner cartridge into the Brother MFC-L2710DW Setup printer.
• Close the access door present at the front.

How to Print Envelopes on Brother MFC-L2710DW

• Pull down the green-colored lock levers you find at both sides of the printer.
• Open the manual feed slot door at the front of the printer.
• Slide the manual feed slot guides and fix it according to the width of the paper you use. Load one envelope in the manual feed slot.
• Open a word document on your computer. Type the content to be printed on the envelope.
• Use the Print option and open the Print Command window.
• Configure the settings that display on the screen and start to print your envelope.

How to Fax on Brother MFC-L2710DW

• Tap the Fax button on the Brother MFC-L2710DW Setup printer.
• You can utilize the scanner glass or ADF to scan the document.
• If you keep the document on the scanner glass, ensure that the document is placed with its printed side facing up.
• If you are using the ADF, check if the document is placed with its printed side faces up.
• Type the Fax number using the dial pad on the screen.
• Tap Start to begin the scan function.
• If you need to quit the process, tap the Stop / Exit button.

Brother MFC-L2710DW Scan to Mac

• The following steps explain to scan using the Brother iPrint & Scan app on your Mac system.
• Click the Finder menu bar on your computer.
• Select Go --> Applications.
• Double-click the iPrint & Scan icon.
• Ensure that the name of your machine is selected.
• If your machine name is not selected, use the Select Your Machine button and choose your printer.
• Carry on with the guidelines on the screen.
• Tap the Scan icon and follow the instructions on the display.
• The printer starts to scan your document.

Brother MFC-L2710DW Scan to PC

• Carry on with the following steps to scan using the Web Services option on your Brother MFC-L2710DW Setup printer.
• Hope you have loaded the document for scanning on the scanner glass of the Brother MFC-L2710DW printer.
• Locate the scan button on the printer and tap it.
• Use the directional keys and select the Web Service option. Tap OK.
• Select the type of scan you need to perform. Press OK.
• Configure the destination PC where you desire to save the scanned document. Tap OK.
• Tap the Start button.

• Hope you have loaded the document for scanning on the scanner glass of the printer.
• Find the Scan key on your printer and select it.
• On the printer’s display, select the Scan to PC option and tap OK.
• Find the E-mail option and select it. Press OK.
• Set the destination computer using the arrow keys. Tap OK.
• Configure the scan settings like the Scan Type, Resolution, File Type, Remove BKG. Clr, and Document size.
• Tap OK --> Start.
• The printer scans the loaded document and saves it as a file attachment.
• It installs an email app and opens a blank email message with the attached scanned file.