How to Do Brother MFC-L2707DW Setup?

The Brother MFC-L2707DW Setup printer prints and copies quickly. This printer can print around 30 pages per minute. Find complete procedure on this page to set up your printer and enjoy its features. Even our technical experts are here to solve any problems that occur with your Brother MFC-L2707DW printer. You can also get guidance from our experts by contacting them to configure your Brother printer.

brother mfc-l2707dw setup

How to Setup Brother MFC-L2707DW Printer

Step 1: Unpack the Brother MFC-L2702DW printer and check its components

  • Open the Brother MFC-L2702DW printer box.
  • You can find the printer components inside the box.
  • The printer components are the Drum unit, AC power cord, printer setup manual (hard copy), CD-ROM, toner cartridge, and telephone line wire.

Step 2: Take off the packing materials and install the toner cartridge.

  • Take the Brother MFC-L2707DW Setup printer out of the box and place it on a flat surface.
  • You can find packing materials and tapes on the printer.
  • Remove all the packing components from the printer.
  • Open the access cover and remove the drum unit from the printer.
  • Remove the orange-colored protective components from the drum unit and fix it back into the printer.

Step 3: Load the input tray.

  • Take a stack of good quality sheet and tap on a flat surface.
  • Extend the paper tray.
  • Place the sheets on the paper tray and fix them by adjusting the paper width guides.
  • Close the paper tray.

Step 4: Execute the power connection.

  • You can find the AC power cord enclosed with the printer package.
  • Unpack the cable.
  • Connect the cable to the respective port of the Brother MFC-L2707DW Setup printer and power supply directly.

Step 5: Power up the printer.

  • Press the power button and turn on the printer.
  • Set your preferences on the display.
  • Download and install the software of the Brother MFC-L2707DW printer.
brother mfc-l2707dw first time setup

Brother MFC-L2707DW Driver and Manual Download

Are you finding the software of the Brother MFC-L2707DW printer? Make one easy click on the Brother MFC-L2702DW Driver Download button provided on this site and get the recently released Brother MFC-L2707DW printer software computerized on your computer or laptop. You can also make use of the Manual Download button on this site to download the softcopy of the printer’s manual. You can find the printer’s warranty and set up procedure in the manual. The driver and manual are supplied on this site for free.

Brother MFC-L2707DW For Windows and Mac

Specific Brother MFC-L2707DW printer software for the Windows and Mac OS are provided on this site for free. Go to the Brother MFC-L2702DW Driver page using the Read More button on this page to get the software downloaded on your computer. You can also avail the Brother MFC-L2707DW Setup printer driver by using the installation CD provided in the printer box.

How to Install Brother MFC-L2707DW

Begin the installation process once you download the software of the Brother MFC-L2707DW printer. You can also install Brother MFC-L2702DW driver from the software CD directly. Some of the recently manufactured Mac systems do not contain a disc drive. So, you have to launch the software by using the Driver Download button on this page.

How to Connect Brother MFC-L2707DW to Wifi

  • Firstly, gather the SSID and encryption key of your router’s network to which you are going to connect the Brother MFC-L2707DW printer.
  • Make sure that the power cord of the Brother printer is connected properly.
  • Also, check if the Brother MFC-L2707DW Setup printer is powered ON.
  • Find the Menu button on the front panel of the printer and tap it.
  • Select the Network option. Tap OK.
  • Utilize the arrow keys to select the options.
  • Select WLAN --> OK --> Setup Wizard --> OK --> WLAN Enable? --> Yes.
  • The machine displays the networks that are active.
  • Find the network name (SSID) of your router and select it.
  • Provide the encryption passkey when the system prompts and tap OK.
  • Once the Brother machine gets connected with the network of your router, the Connected Printing message displays on the printer’s LCD.

Brother MFC-L2707DW Replace Toner

  • Unbox the new toner cartridge that you have purchased from the manufacturer’s store.
  • Remove the protective cover of the cartridge.
  • You can find orange-colored plastic material on the printer.
  • Open the scanner unit at the printer’s top.
  • Open the drum access door of the printer.
  • Remove the drum unit from the printer.
  • Take the toner cartridge out of the printer.
  • Remove the plastic material from the new toner cartridge.
  • Fix the cartridge into the drum unit.
  • Insert the entire drum unit into the printer.
  • Close the access door and scanner unit.

Brother MFC-L2707DW Scan to Email

  • Find the IP address of your printer and note it down.
  • Open an internet browser on your computer.
  • Type the Brother MFC-L2707DW Setup printer’s IP address on the address bar and click the Search button.
  • Find the Network tab and select it.
  • Click the Protocol option.
  • Tick the checkbox next to POP3/SMTP.
  • Select Advanced Setting.
  • Fill all the credentials and tap Submit.
  • The E-mail server setup is executed successfully.
  • Now you can scan to email using the Brother MFC-L2707DW printer.

Brother MFC-L2707DW Toner Reset

  • Open the toner cartridge access door at the front of the Brother MFC-L2707DW Setup printer and keep the door opened until you complete the toner reset process.
  • Press and hold the OK button for a few seconds.
  • Press * --> 0 --> 0 on the front panel of the printer.
  • Close the access door at the front and complete the reset process.

Brother MFC-L2707DW Drum Reset

  • You can reset the drum unit of the Brother MFC-L2707DW printer after replacing it.
  • Open the access door at the front of the Brother printer.
  • Hold the OK button for two seconds.
  • Tap the 1 key to reset the drum unit of the Brother MFC-L2707DW printer.

Brother MFC-L2707DW Mobile Printing

  • Gather the network name and password (network key) of your router.
  • Connect the Brother MFC-L2707DW Setup printer with the network of your router by using the guidelines provided in the previous topic.
  • Link your mobile to the same router.
  • Open the Play Store application on your mobile.
  • Download and install the iPrint & Scan application.
  • Open the application and print your documents or images.
  • For more instructions about the Mobile printing feature, call our technical experts and avail more guidance.

Brother MFC-L2707DW Fax Setup

  • Unpack the telephone cord provided in the printer package.
  • Connect an end of the cable to the respective port of the printer and the other end to the phone-line socket.
  • Once the printer’s panel, tap Menu --> 0 --> 1 --> 1.
  • Type the last two digits of the year, month, and day.
  • Continue the process by tapping the OK button.
  • Choose the 12th Clock or 24th Clock option.
  • Tap the OK button.
  • Tap Stop or Exit and complete the Fax setup.

Brother MFC-L2707DW Troubleshooting

Fix any problems with the Brother MFC-L2707DW printer using the solutions available in the following topics. You can also avail solutions from our technical experts by contacting them.

Brother MFC-L2707DW Not Printing

  1. Ensure that the Brother MFC-L2707DW Setup printer is turned on.
  2. Also, ensure that there is no error displays on the printer’s LCD.
  3. Examine the connection between your Brother MFC-L2707DW printer and computer.
  4. Check for any problems with the software of the Brother printer by using a third-party tool.
  5. Delete the printer software on your computer.
  6. Download and install the existing printer software.
  7. Check the printer’s IP address on your computer.
  8. If you are using a router for connecting your printer and computer, ensure that the router is providing an active internet connection.

Brother MFC-L2707DW Printer Offline

  1. Examine if the Brother MFC-L2707DW Setup printer is in an active state.
  2. Inspect the link between your printer and computer.
  3. Click the Start menu on your computer.
  4. Type Control Panel on the search field and click it in the result.
  5. Select Hardware and Sound --> Devices & Printers.
  6. Find the printer icon with the name of your printer.
  7. Right-click on the icon.
  8. Select See What’s Printing --> Printer.
  9. Locate the Cancel All Documents option and select it.
  10. Also, verify the status of your printer.
  11. Ensure that the printer software on your computer is compatible with the model of your printer.
printer setup support