Brother MFC-J6930DW Setup

The Brother MFC-J6930DW printer delivers documents with high-quality. This printer has multiple connectivity options. This page encloses guidelines to configure the Brother MFC-J6930DW printer. It also includes solutions to fix any issues regarding the Brother machine. You can also call our experts and avail guidance to set up the Brother MFC-J6930CW printer. Our experts also troubleshoot any issues that are related to the Brother machine.

Unpack the Brother MFC-J6930DW printer.
Make sure to load the paper tray of the printer with suitable sheets.
Execute the power connection of the Brother machine.
Use the power button and turn on the machine.
Install the ink cartridges into the printer.
Set up the telephone line cord.
Configure the software of the Brother MFC-J6930DW printer and complete the unboxing setup.

Brother MFC-J6930DW Driver For Windows and Mac

The extension of the Brother MFC-J6930DW printer driver file for the Windows operating system is in the .exe format. The driver file format for Mac OS is in the .dmg or .pkg format.

How to Connect Brother MFC-J6930DW

• Hope you have downloaded the software for the Brother MFC-J6930DW printer.
• Install the software.
• Carry with the instructions on the screen.
• Set the Wireless connection when the system prompts.
• Enable the Wireless option on your Brother MFC-J6930DW printers.
• Connect your machine to the network of a router which has an active internet connection.
• Configure the other settings on your computer while installing it.

Brother MFC-J6930DW Reset Password

• Ensure that the Brother MFC-J6930DW printer is in an ideal state.
• Disconnect all the cables from the printer, if connected.
• Tap the Menu or Menu / Set button on the front panel of the Brother MFC-J6930DW printer.
• Choose LAN or Network --> Set or OK.
• Choose the options by using the navigation keys.
• Select the Factory Reset option and tap OK.
• Choose Reset --> Yes.
• Now the Brother machine restarts by itself.
• Reconnect the cables and complete the reset process.

Brother MFC-J6930DW Toner Reset

• Power off the Brother MFC-J6930DW machine and wait for a few minutes.
• Turn on the Brother machine.
• You can find a lid at the top of the machine.
• Raise the lid and open it.
• Tap the Cancel and Print buttons at a time and press the plus (+) button.
• Scroll and select the ink cartridge which you need to reset.
• Tap OK or Enter and complete the toner reset process.

How to Load A3 Paper In Brother MFC-J6930DW

• Extend the paper tray of the Brother MFC-J6930DW printer and remove it.
• Keep the tray on a flat surface.
• You can find green-colored slides.
• Gently slide the slider to the left and pull the tray until it locks into its place.
• Adjust the paper width guide & paper length guide according to the size of the A3 paper.
• Take a bunch of A3 paper and tap on an even surface.
• Make sure that the sheets are not curled and wrinkled.
• Load the sheets in the paper tray with the printed side facing down.
• Ascertain that the paper length guide touches the edges of the sheets.
• Fix the sheets by sliding the paper width and length guides.
• Ensure that the sheets are below the maximum paper mark.
• Insert the paper tray into the Brother MFC-J6930DW printer.
• Pull the paper support and unfold its flap.
• Configure the paper size in the printer’s panel and complete the setup.

How to Print 11*17 On Brother MFC-J6930DW

• Begin you begin the printing process, ensure that you have installed the software of the Brother MFC-J6930DW printer.
• Open the print command window using the printer software.
• Ascertain that the name of your printer is selected.
• Ascertain that suitable sheets are loaded in the paper tray of the Brother MFC-J6930DW machine.
• Set the paper size as 11*17.
• Configure the other print settings and tap OK.
• Now you can start printing your document.

How to Print Double Sided On Brother MFC-J6930DW

• Open the print command window on your system by using the software of the Brother machine.
• Go to the File menu and select the Print option.
• Choose your printer name and select the Printing Properties or Preferences option.
• Select the Portrait or Landscape option in Orientation.
• Click on the 2-Sided or Booklet drop-down list and select the 2-Sided option.
• Configure the other settings and start the printing process.

• Open the access cover present at the back of the Brother MFC-J6930DW printer.
• Now you can find two green-colored lock levers inside the printer.
• Slide one lever to the left and other to the right.
• Open the access door of the manual feed slot at the front.
• Slide the guides of the manual feed slot according to the size of the envelopes.
• Load an envelope in the slot.

• Open the printer software on your computer and set the Paper Size, Paper Source, and Media Type.
• Send the content to be printed on the envelope from your computer to the printer.
• Tap the Print option to start the printing process.
• Once the printing is done, load the next envelope and print it in the same way as explained in the previous steps.
• Close the cover of the manual feed slot and complete the printing process.