Brother MFC-J4310DW Setup Guidance

Unbox the Brother MFC-J4310DW printer carton and examine the printer components

Remove the cover over the Brother MFC-J4310DW printer carton and open it.
The printer components are the Starter Ink Cartridges (Black, Cyan, Yellow, Magenta), Quick Setup Guide, Telephone Line Cord, C-ROM, Product Safety Guide, and Basic User’s Guide.
Peel off the protective tape and film on the printer.
Check for the label on the control panel and peel it.

Keep plain letter / A4 paper in the paper tray of the Brother MFC-J4310DW printer

Extend the paper tray of the and take it out of the Brother MFC-j4310DW printer.
Open the door of the cover of the output paper tray.
Keep a bunch of plain letter / A4 paper in the tray.
Fix the sheets by adjusting the paper guides.
Re-fix the paper tray of the Brother MFC-j4310DW printer.

Execute the power connection of the Brother MFC-J4310DW machine

Plug the power cable of the Brother printer to a power source.
Raise the scanner lid of the Brother MFC-J4310DW setup until it locks into the open position.
Connect the telephone line cord if needed.
Close the lid.

Insert the ink cartridges

Power up the Brother MFC-j4310DW printer by force pressing its power button.
Open the access door of the ink cartridges.
Find the orange-colored protective material and remove it.
Unpack the ink cartridges and insert them into the respective ports of the printer.
Examine the print quality of the machine.

Configure your preferences and set the connection of the printer

Set the settings like the language, country on the control panel of the Brother MFC-j4310DW printer.
Launch the Brother printer software and connect the machine to your computer.

Brother MFC-J4310DW Manual Guidance

Avail the manual (softcopy) of the Brother MFC-J4310DW printer by clicking the Manual Download button present above.

Brother MFC-J4310DW Driver Installation

The installation process can be carried out after downloading the Brother MFC-J4310DW printer software. Click the printer driver file, follow the instructions, and complete the installation.

Steps: Brother MFC-J4310DW Ink Cartridge Replacement

Open the cover of the Brother MFC-J4310DW printer’s ink cartridge.
Remove the cartridge which you need to replace by using its lock lever.
Remove the cover of a new ink cartridge.
Turn the green-colored lever counterclockwise to remove the orange-colored packing material from the cartridge.
Insert the cartridge into the Brother MFC-J4310DW setup.
Use the arrow marks on the cartridge for fixing it.
Close the access door & complete the ink cartridge replacement process.

Brother MFC-J4310DW Wireless Setup

Open the Brother MFC-J4310DW printer software on your computer to install it.

Configure the wireless method during the installation process.

Proceed with the prompts on the display and complete the wireless setup.

Brother MFC-J4310DW Scanner Driver Download

Use the scan driver to perform the scan function of the Brother MFC-J4310DW setup. The file size of the scan driver is less when compared to the full feature software.

No scanner software is available for the Windows operating system. You can execute the scan function by using the full feature software for the Brother MFC-J4310DW printer which is available on this page.

How to Scan on Brother MFC-J4310DW?

The following steps explain how to scan to a USB drive or memory card.
Firstly, load your document on the respective place of the Brother MFC-J4310DW printer for scanning.
Open the cover of the printer’s media cover.
Insert the memory card or USB driver into the respective port of the Brother MFC-J4310DW setup.
Tap the Home key on the front panel of the printer.
Select Scan. Use the arrow keys to select the Scan To Media type option.
Tap Scan To Media to begin the scan function of the Brother MFC-J4310DW printer.

Guide: Brother MFC-J4310DW Firmware Update

Firmware Update Tool for Windows

If you are a Window user, make use of the Firmware Update tool to upgrade the software of the Brother MFC-J4310DW printer.

Firmware Update Tool for Mac

Are you a Mac user? Give a click on the Firmware Update Tool button to avail the software tool.

The software needs the Sun JavaVM platform to update the driver of the Brother MFC-J4310DW setup. For detailed information, call our well-qualified technical experts.

Brother MFC-J4310DW Setup Troubleshooting

Troubleshoot any problems with the Brother MFC-J4310DW printer with the help of our technical experts. Here are some quick solutions for the Brother printer not printing and offline issues.

How to Reset Brother MFC-J4310DW?

Tap the Settings icon on the top-right corner of the Brother MFC-J4310DW printer’s panel.
Use the arrow buttons to find the Initial Setup option and select it by pressing the OK button.
Select Reset.
Select the type of reset option you need to execute by using the directional keys.
Tap Yes to confirm the process.
Again press Yes for 3 seconds to restart the Brother MFC-J4310DW setup.

Solved: Brother MFC-J4310DW Offline

Examine the power connection of the Brother MFC-j4310 printer.
Do not plug the AC power cord of the Brother machine to a surge protector as it may produce power fluctuations.
Also, check the connection between your Brother MFC-J4310 setup and computer.
Go to the Devices and Printers option and check if the printer is in the online status.
If the Brother MFC-J4310 printer is in the offline status, disable it by unticking the Use the Printer Offline option.

Fixed: Brother MFC-J4310DW not Printing

Tap the Settings icon and go to the General Setup option.
Select the Ink option.
Choose Test Print --> Print quality --> Start.
Now the Brother MFC-J4310DW printer prints a Print Quality Check Sheet.
Examine the check sheet.

Tap Yes on the panel of the printer if the print quality is low.
Press Yes to clean the print head of the Brother MFC-J4310DW setup.
Once the print head is cleaned, tap Start.
The Brother machine prints a check sheet again.
If the Brother MFC-J4310DW printer not printing issue continues, reach our technical support team for more solutions.