How to Execute Brother HL-L6300DW Setup?

The Brother HL-L6300DW Setup is a compact printer which fits your desk perfectly. This printer has a high standard of paper handling capacity. The printer prints 48 pages per minute (ppm). Start to set up the Brother HL L6300DW printer after purchasing it. Use the guidelines on this page to configure your Brother HL L6300DW printer. You can also avail the software the printer from this site for free.

How to Setup Brother HL-L6300DW

  1. Open the Brother HL L6300DW printer box and check if the printer components are present in it.
  2. The components are the software CD, AC power cable, manual (hard copy), and Drum Unit & Toner Cartridge Assembly.
  3. Take the drum unit & toner cartridge assembly and remove the packing components on it.
  4. Load the paper tray of the Brother HL L6300DW printer with compatible sheets.
  5. Unpack the AC power cord.
  6. Link the cable to the Brother HL-L6300DW Setup printer and power supply directly.
  7. Power up the Brother printer by force pressing its power button.
  8. Set your preferences on the control panel.
  9. Configure the software of the printer and complete the setup.
brother hl-l6300dw setup

Brother HL-L6300DW Driver Download

The driver of the Brother HL L6300DW printer can be obtained by clicking the Driver Download button on this page. You can also install Brother HL-L6300DW driver by using the installation CD enclosed with the printer package.

Brother HL-L6300DW Driver Mac

The Brother HL L6300DW printer software on your Mac device is in the .dmg format. Some of the versions of Mac devices have in-built printer software. You can install Brother HL-L6300DW driver of your printer in the OS of your computer or laptop. You can also make use of the Apple Update software in your system to enjoy the operations your Brother HL-L6300DW Setup printer.

Brother HL-L6300DW Driver Windows

The software CD provided in the printer package is used to install Brother HL-L6300DW driver on your Windows computer or laptop. You can also utilize the Driver Download button on this page to download the software of the Brother HL L6300DW printer.

How to Connect Brother HL-L6300DW to Wifi

  • Use the following procedure to set up the wireless connection on the Brother HL L6300DW printer if your router has a WPS button.
  • On the control panel of the Brother HL-L6300DW Setup printer, select Settings --> Network --> WLAN --> WPS.
  • When the Switch Network Interface to Wireless? screen opens, tap Yes.
  • Press OK when the Start WPS on Your Wireless Access Point or Router message displays on the screen.
  • Now find the WPS button on your router and press it.
  • Tap OK on the control panel of your printer.
  • The printer takes a few seconds to connect with your router.
  • Once the devices are connected, the Connected message displays on the screen.

Brother HL-L6300DW Wireless Setup

  • Carry on with the following steps to execute the wireless setup in the Ad-Hoc mode using a new network ID.
  • Power on your router & check if it is working correctly.
  • On the control panel of the Brother HL-L6300DW Setup printer, tap Settings --> Network --> WLAN --> Setup Wizard.
  • When the Switch Network Interface to Wireless? message displays, tap Yes.
  • Now the machine searches for the networks that are present and displays on the control panel.
  • Find the New SSID option and select it using the arrow keys.
  • Provide the network name of your router and tap OK.
  • Select the Ad-Hoc option.
  • Choose either None or WEP to set the Encryption type.
  • If you choose the WEP option, enter its password and tap OK.
  • Save the settings by tapping Yes.
  • Now the Brother HL L6300DW printer gets connected to the network of your router.

How to Reset Toner on Brother HL-L6300DW

  • Raise the toner access door and keep it opened until you complete the Brother HL-L6300DW toner reset process.
  • Power off the Brother HL-L6300DW Setup printer.
  • Press & hold the Go button and turn on the printer.
  • Once the printer powers on, release the Go button.
  • Again press the Go button for 2 times.
  • Now all the lights on the printer start to flash.
  • Tap the Go button 5 times.
  • The toner light stops flashing.
  • The paper light turns on or flashes.
  • Close the access door.
  • Now, only the ready light will flash.

Brother HL-L6300DW Drum Reset

  • It is mandatory to turn on the Brother HL L6300DW printer to perform the drum reset process.
  • On the printer’s front panel, tap Settings --> Machine Information --> Parts Life.
  • Press & hold the Drum Life option and tap Yes.
  • Tap the Home button.
  • Now the drum unit resets to its default configurations.

How to Clean Brother HL-L6300DW

  • Open the access door of the Brother HL-L6300DW Setup printer using its lever.
  • Remove the toner drum from the printer.
  • Also, remove the cartridges from the drum unit.
  • You can find a blue or green-colored tab at the top of the drum unit.
  • Slide the tab back and forth for twelve times.
  • Spin the drum unit around and check if there is no toner present.
  • If the toner present, clean it using a lint-free cloth.
  • Fix the toner cartridges and drum unit back to the printer.
  • Close the door and complete the cleaning process.

How to Print on Brother HL-L6300DW

  • Open the print command window on your Brother HL-L6300DW Setup software.
  • Choose the name and model of your printer.
  • Click the Printing Properties or Preferences button.
  • Now the printer driver window opens.
  • Ensure that you have loaded compatible sheets in the paper tray.
  • Choose the sheet size using the Paper Size drop-down list.
  • Go to the Orientation field, choose the Portrait or Landscape option to configure the orientation.
  • Set the number of copies you wish to print in the Copies field.
  • Choose the paper type using the Media Type drop-down list.
  • Configure the other settings and tap OK.

How to Reset Brother HL-L6300DW

Resetting the Brother HL-L6300DW Setup printer is the best solutions for any issues with it. Find procedure for the resetting process in the following topic.

Brother HL-L6300DW Factory Reset

On the front panel of the Brother HL L6300DW printer, tap Settings --> Reset Menu --> Factory Reset.Tap Yes.When the system prompts to reset the Brother HL L6300DW printer, tap Yes for 2 seconds.Tap the Home button.

Brother HL-L6300DW Troubleshooting

Solve any issues with the Brother HL L6300DW printer using the troubleshooting guidelines provided in the following topics. You can also avail assistance from our technical support team to fix any problems that arise with your Brother HL-L6300DW Setup printer.

Brother HL-L6300DW Replace Toner Error

  1. Disclose the access door of the toner cartridge.
  2. Wait for few minutes.
  3. Close the access cover.
  4. Tap the Secure & Lock buttons at a time.
  5. Choose the Cartridge option to reset the cartridge of the Brother HL L6300DW printer.

Brother HL-L6300DW Offline

  1. Check the power correction of the printer.
  2. Examine the connection between your Brother HL-L6300DW Setup printer.
  3. Delete all the print job on your computer.
  4. Configure your printer to its default configurations.
  5. Update the software of the Brother HL L6300DW printer.
  6. For more solutions to solve the Brother HL L6300DW printer, call our technical experts.