Simple Instructions For Brother HL L2340DW Setup

The Brother HL L2340DW Setup is a compact printer which required small space on your desk. The printer performs at high speed. This printer suits your home and office works. The output quality of this printer is just amazing when compared to others. Find simple and easy procedure in the following topics to set up the Brother HL L2340DW printer.

Brother HL L2340DW Unboxing Setup

  1. Check the seal on the Brother HL L2340DW printer box after purchasing it.
  2. Unseal the box using a knife.
  3. Open the box and ensure that the printer components are provided in it.
  4. Take out the components and place them aside.
  5. Now place the printer on a dust-free surface.
  6. Remove the white-colored plastic cover from the printer.
  7. Discard all the packing materials and protective tapes from inside and outside of the printer.
  8. Load the input tray with compatible sheets.
  9. Set up the Brother HL L2340DW Setup printer software on your computer and complete the setup.
brother hl l2340dw setup

Brother HL L2340DW Driver and Manual Download

Download the Brother HL L2340DW printer’s manual and driver by using the Driver Download and Manual Download buttons on this page. The manual encloses the guidelines to set up the printer. It also includes the procedure to configure the software of the Brother HL L2340DW printer.

Software Download→

Brother HL L2340DW Driver For Windows and Mac

The software of the Brother HL L2340DW printer can be obtained on your Mac or Windows system by clicking the Brother HL L2340DW Driver Download button offered this page. The Brother HL-L2340DW printer software can also be computerized from the manufacturer’s site. You can also make use of the Brother HL L2340DW installation CD provided in the printer box to obtain the software of the Brother HL L2340DW Setup printer.

Brother HL L2340DW Wifi Setup

Here are simple & quick procedure to execute the Wi-Fi setup using the control panel of the Brother HL-L2340DW printer.

How to Connect Brother HL L2340DW Printer to Wifi

  1. Make sure that your router is powered up.
  2. Do not forget to note the network name and password of the router.
  3. Ensure that the Brother HL L2340DW printer is powered on.
  4. On the control panel of the printer, tap the Brother HL L2340DW wifi setup option & tap OK.
  5. Select the WLAN option and choose Setup Wizard.
  6. Follow the procedure by tapping the OK button.
  7. When the WLAN Enable? question and select Yes.
  • Now the Brother HL L2340DW Setup printer finds the networks that are accessible and displays on the control panel.
  • Select the network name of your router using the arrow keys.
  • Enter the network’s passkey if needed.
  • You can find the Connected message when the connection is implemented successfully.Download and install the Brother HL L2340DW printer software on your computer.
  • Set the wireless connection method and complete the setup.

Brother HL L2340DW Airprint Setup

  • Link your Apple device to the Brother HL L2340DW Setup printer using the network of a router or access point.
  • Refer to the steps below to print using the AirPrint feature.
  • Use the Safari browser on your computer and open the page which you intend to print.
  • Find the Share icon on the Apple device and select Print.
  • Ensure that the Brother printer is select.
  • If the name of your printer is not selected, choose the Select Printer option and select it.
  • A list of accessible printers appears on the screen.
  • Choose your machine name.
  • Configure the desired settings like the number of pages, 2-sided printing and more.
  • Finally, click the Print option and start printing the page.

How to Reset Toner on Brother HL L2340DW

  • Open the access door present at the front of the Brother HL L2340DW Setup printer.
  • Leave the door opened until you complete the reset process.
  • Power OFF the Brother HL L2340DW printer if it is turned off previously.
  • Press the GO button and hold it.
  • Now press the power button.
  • Keep holding the GO button for 2 seconds and release it.
  • Now User Mode appears on the screen.
  • Tap the Go button for 9 times.
  • The LED of the Wi-Fi option starts to flash.
  • Tap the Go button for 5 times simultaneously.
  • Close the access cover and reset the toner.
  • Tap the OK button for 3 times to print a status page.
  • The status page indicates that the toner resets successfully.

How to Reset Drum on Brother HL L2340DW

  • Before starting the reset process, check if the Brother HL L2340DW Setup printer is turned on.
  • Raise the access door present at the front of the printer.
  • Find the OK button and keep holding it to display Drum Unit.
  • Tap the OK button.
  • Use the Up arrow key to view the Reset option.
  • Now the drum unit of the printer resets to its default configurations.
  • Close the access cover at the front and complete the reset process.

Brother HL L2340DW Factory Reset

  • Do not connect the Brother HL L2340DW printer with any network.
  • Tap the Menu button on the control panel of the Brother printer.
  • Find the Initial Setup option.
  • Follow the process by tapping the OK button.
  • Tap Reset and select the reset type.
  • For resetting the Brother HL L2340DW Setup printer to its default settings, tap 1 on the control panel.
  • To obtain more information regarding the reset process, contact our techies.

Brother HL L2340DW Firmware Update

  • Download the Firmware Update tool from the manufacturer’s site.
  • Once you download the tool, save it in the desired folder on your system.
  • Open the tool by double-clicking on it.
  • Tap Run, Save, or Cancel.
  • Click on the name of your machine and click Continue.
  • Tap the I Accept button.
  • Carry on with the process by tapping the Next button.
  • When the system prompts you to enter the password of your Brother HL L2340DW Setup printer, type it in the required field.
  • Now the printer starts to update the firmware.
  • The process takes around 15 minutes.
  • Once the update is completed, the Successfully Completed message appears on the screen.

Brother HL L2340DW Troubleshooting

Troubleshoot any problems with the Brother HL L2340DW printer using the solutions provided on this page. You can also avail guidance from our technical experts by contacting them.

Brother HL L2340DW Replace Drum Error

  1. Ensure that the Drum unit is compatible with the model of your Brother HL L2340DW Setup printer.
  2. Also, check if there are any damages found on the drum unit.
  3. If the drum unit is not in good condition, replace it with a new one.
  4. Reset the drum unit using a related option on the control panel of the Brother HL L2340 printer.
  5. For more solutions to fix the drum unit error, reach our techies by contacting them.

Brother HL L2340DW Connection Failed

  1. If you have connected the Brother to the network of a router, ensure that the router is working properly.
  2. Also, examine if the router is providing an active network connection.
  3. If you have linked your printer and computer using a USB cable, check if the cord is connected correctly.
  4. Delete the software of your Brother HL L2340DW Setup printer.
  5. Download and launch the newest version of the Brother printer software.
  6. Execute a printer operation and check if the issue is fixed.
  7. For more solutions to fix the connection issue, call our techies.

Copyright © 2020 - 2021 printer-setup.us | All Rights Reserved.

printer setup support
➤