How to Perform Brother HL L2300D Setup?

The Brother HL L2300D Setup printer has excellent paper handling capacity. This printer is suitable for performing heavy-duty. It prints 27 pages per minute. Set up the Brother HL L2300D printer after purchasing it. Make use of the guidelines provided on this site to configure your printer. You can also avail the printer’s software using this site for free.

brother hl l2300d setup

Brother HL L2300D Unboxing Setup

  1. Check the manufacturer’s seal is on the printer box.
  2. Peel off the tapes on the box using a knife.
  3. Open the box.
  4. You can find the printer materials and Brother HL L2300D Setup printer inside the box.
  5. The printer materials are the Quick Setup guide (hard copy), toner cartridge, and Brother HL L2300D installation CD.
  6. Place the printer on a flat surface.
  7. Before you begin to set up the printer, go through the Quick setup guide provided in the printer box.
  8. Take out the packing materials and tapes from the printer.
  9. Remove the orange colored protective material present inside the printer.
  1. Take out the drum unit from the printer.
  2. Unpack the toner cartridge enclosed in the printer package.
  3. Remove the orange-colored plastic from the cartridge.
  4. Insert the toner cartridge into the drum unit firmly.
  5. Fix the drum unit into the printer.
  6. Close the access cover at the front of the printer.
  7. Connect the power cable to the Brother HL L2300D printer and power socket directly.
  8. Press the power button to power up the printer.
  9. Thus the hardware setup of the Brother HL L2300D Setup printer is implemented successfully.

Brother HL-L2300D Driver Download

The software of the Brother HL L2300D printer can be downloaded on your computer by using the Brother HL L2300D Driver Download button on this page. You can also make use of the software CD given in the printer box to install the printer driver.

Brother HL-L2300D Driver Mac

The driver file extension for the Mac system is the .pkg, .dmg, or .zip format. Get the driver either from the Driver Download button on this page or the manufacturer’s site.

Brother HL-L2300D Driver Windows

The driver file for the Windows system should be in the .exe format. Click the Driver Download button and download the software of the printer for free.

How to Connect Brother HL-L2300D

Brother HL-L2300D Wireless Setup Mac

  • Make a note of the network name and password of your router to which you are going to connect your Brother printer.
  • Verify if you have installed the newest version of the Brother HL L2300D Setup printer software on your computer.
  • Open the printer application on your computer.
  • Select the Yes, I Have a USB Cable to Use For Brother HL L2300D Install option and tap Next.
  • Now the Important Notice window appears on the screen.
  • Check the network name and password of the router,
  • Connect a USB cable to the Brother HL L2300D printer and computer temporarily.
  • A list of networks displays on the screen.
  • Select the network name of your router and tap Next.
  • Type the key of the network and click Next.
  • Continue the process by tapping the Next button.
  • In the Choose The Device You Want To Install screen, select the name & model of your printer, and tap the Next button.
  • Finally, tap Finish.
  • Now add your printer name to the devices list on your Mac device and complete the setup.

How to Reset Toner Brother HL-L2300D

  • Turn off the Brother HL L2300D Setup printer to begin the Brother HL L2300D toner reset process.Take out the toner cartridge from the printer.
  • Gently tremble the cartridge and insert it back to the printer.
  • Tap the Go button on the control panel of the printer 7 times simultaneously.

How to Reset Drum on Brother HL-L2300D

  • Open the access cover at the front.
  • Find the Go button and hold it until all the LEDs on the printer light up.
  • Close the access cover.
  • Ensure that the LED of the drum unit turns off.

How to Replace Toner on Brother HL-L2300D

  • Before you replace toner of your printer, buy a new toner cartridge from the manufacturer’s store.
  • Ensure that the Brother HL L2300D Setup printer is powered on.
  • Open the access door.
  • You can find a toner cartridge and drum unit assembly.
  • Remove the drum unit assembly with the cartridge from the printer.
  • Remove the toner cartridge from the unit by pressing the green-colored lock lever gently.
  • Take the new cartridge which is purchased from the manufacturer’s store and unpack it.
  • Remove the protective cover on the cartridge.
  • Insert the cartridge into the printer.
  • Press the cartridge until it produces a click sound.
  • You can find a green or blue-colored tab on the unit.
  • Gently slide the tab to clean the corona wire which is present inside the drum unit.
  • Fix the toner cartridge and drum unit assembly into the printer.
  • Close the access door at the front.

How to Print Envelopes on Brother HL-L2300D

  • Before you start to load the envelope, press its corners to make it flat.
  • Disclose the back access door of the Brother HL L2300D Setup printer.
  • You can find two green-colored levers.
  • Gently pull down the levers to their opposite sides.
  • Open the front access door of the printer.
  • Disclose the cover of the manual feed slot.
  • Release the paper width guides.
  • Place an envelope in the manual feed until its front edge touches the paper feed roller.
  • Open any word document on your computer.
  • Type the content what you want to print on the envelope.
  • Use the Print option to print the envelope.

Brother HL-L2300D Factory Reset

  • Resetting the printer is one of the essential methods to fix any problems that arise with the Brother HL L2300D printer.
  • Carry on with the following steps to reset your printer to its default configurations.
  • Hold the power button to power up the Brother HL L2300D Setup printer if it is turned off previously.
  • Tap the Go button and turn on the printer by using the power button.
  • Keep holding the Go button until the LED of the toner, Drum unit, and paper tray turns on.
  • Now release the Go button.
  • All the LEDs will turn off.
  • Again tap the Go button for 10 times.
  • Now your Brother HL L2300D printer resets to its default configurations.

How to Clean Brother HL-L2300D

  • Open the printer by pulling the lever present at the front of the printer.
  • Remove the drum unit assembly with the toner cartridge from the printer.
  • You can find a green-colored tab on the drum unit.
  • Slide the tab for 5 to 6 times.
  • Spin the drum unit and check if it is clean.
  • Also, clean the drum unit utilizing a cotton swab dipped in distilled water or glass cleaner.
  • Leave the drum unit to dry.
  • Insert the cartridges back to the printer.
  • Also, fix the drum unit.
  • Close the door at the front and complete the cleaning process.

How to Reset Brother HL-L2300D

  • Press the power button to turn up the Brother HL L2300D Setup printer.
  • Relax until the printer turns on and remains silent.
  • Once the Brother HL L2300D printer becomes idle, disconnect the power cable from the printer and power supply.
  • Wait for a few minutes and connect the cable to the printer & power outlet directly.
  • The printer turns on and resets automatically.

Brother HL-L2300D Troubleshooting

You may face some issues with the printer at times. Do not worry if any problems arise with the Brother HL L2300D Setup printer. Find solutions for the printer problem in the below given topics. You can also avail more solutions from our techies by calling them.

Brother HL-L2300D Toner Error

  1. Fix the toner error by resetting the toner cartridge of the printer.
  2. If the toner error continues, replace the toner with a new one.
  3. It is recommended to shake the cartridge before you fix it into the printer.
  4. If the toner error persists, contact our technical experts and get more assistance.

Brother HL-L2300D Not Printing

  1. Examine if the toner cartridge of the Brother HL L2300D Setup printer is working properly.
  2. If the cartridge is in bad condition, replace it with a new one.
  3. You can purchase a new cartridge from the manufacturer’s store.
  4. Reset the toner cartridge. Delete all the print jobs if any.
  5. Remove the Brother HL L2300D printer software on your computer.
  6. Download and install the current version of the printer driver.
printer setup support