Brother HL-4570cdw Setup Guide

Brother HL-4570cdw Setup
  • Unpack the Brother HL-4570cdw setup from the carton and also remove the other accessories that came along with it.
  • Remove the protective tapes surrounding the printer, open the front panel of the printer and make sure to remove the packaging material present inside.
  • Pull out the drum unit from the inside of the printer and remove the packaging rolls.
  • Take out the toner cartridges from the sealed packaging and insert them by pushing in until you hear them click.
  • Pull the paper tray out of the printer and move the paper guides to the corners of the tray. Insert a stack of paper. Make sure not to exceed the tray limit.
  • Take out the power cord from the sealed packaging, connect it to the power source, and connect the other end to the rear end of the printer.
  • Press the Power button to turn ON the Brother HL-4570cdw setup.
  • Press the + or the – buttons on the printer to select the language of your choice.
  • After completing the hardware setup of the printer, proceed to install the printer software on your computer and connect the printer to it.

Brother HL-4570cdw Driver Download

Driver for Printer
  1. You can download the driver for the Brother HL 4570CDW from the official Brother support page.
  2. Open the default browser on your Windows or Mac computer.
  3. Enter the URL for the Brother Printer Support in the address bar and press the Enter button.
  4. On the printer support page, click the Downloads tab on the left pane.
  5. Choose the operating system and click the OK button.
  6. Select the driver from the list of drivers and click the Download button.

Brother HL-4570cdw Manual Download

User Manual
  1. You can download the user’s manual for the Brother HL-4570cdw setup from the Official Brother support page.
  2. Enter the support page URL in the address bar of the browser and press the Enter button.
  3. On the printer’s support page, click the Manuals tab on the left pane.
  4. Select the required user manual from the list provided and click the Download button.

Install Brother HL-4570cdw Driver Software

  1. You can either download the printer driver or use the installation CD to install the driver on your computer.
  2. Double-click the driver installer to begin the installation.
  3. The Epson installer page will now open.
  4. Click on the Install Printer Driver button.
  1. Press the Yes button in the setup wizard to accept the license agreement.
  2. Choose the type of connection and follow the on-screen instructions.
  3. The driver installation for the Brother HL 4570CDW printer will be completed.

Brother HL-4570cdw Wireless Setup

The Brother HL-4570cdw setup supports the Wi-Fi Protected Setup feature. Before proceeding with the WPS setup, you will have to make sure your printer is within the connectivity range of the router.

  1. If your router has a WPS button, connecting the printer to your wireless network is easy.
  2. Use the + or - keys on the Control panel to select the Network option. Press OK.
  3. Now, select the WLAN > WPS/AOSS > WLAN Enble? options.
  1. When the printer LCD shows the message Press Key or rtr, press the WPS button on the router.
  2. You will now see the printer light blinking rapidly, indicating that the printer is finding the wireless connection.
  3. The light will turn solid once the connection is secure.

Guide: Brother HL-4570cdw Replace Fuser

  • Select the power button and turn off the Brother HL-4570cdw setup.
  • Open the front cover of the printer.
  • Make sure to loosen the screws on either side of the printer to release the fuser unit.
  • Hold the fuser unit on both the sides and gently lift it from the printer.
  • You have to make sure to remove the oil bottle and the Fuser cleaner from the unit.
  • Take out the new fuser unit from the sealed packaging, then gently install it by holding the handle on either side.
  • Screw the fuser unit.
  • Move the unit to level with the positions.
  • Insert the Oil bottle and the Fuser cleaner back into respective slots.
  • Close the front cover of the printer.
  • Finally, press the Power switch and turn the printer on.

Brother HL-4570cdw Firmware Update

  • You can download the new Firmware from the official Brother support page.
  • Open the default browser on your computer and enter the URL for the Brother Support page. Then press the Enter button.
  • Go to the Brother HL-4570cdw setup’s page and click the Downloads tab on the left pane.
  • Choose the operating system and click the OK button.
  • Scroll down to the Firmware section and click the Download button.
  • Perform a double-click on the downloaded Firmware file and run the installation.
  • Follow the instructions on the installer and complete the firmware update process.

Brother HL-4570cdw DRUM Replacement

  • Before you replace the drum unit, you need to make sure the printer is turned on.
  • Open the front cover of the printer.
  • Hold the handle on the sides of the drum unit and slide it out of the printer.
  • Turn the green level lock counter-clockwise on the left side of the Brother HL-4570cdw to let go of the drum.
  • You will find cartridges attached to the drum unit. Gently remove the cartridges from the drum unit.
  • Take out the new drum unit and insert the toner cartridges into their respective slots.
  • Place the drum unit into the slot and screw the green level lock to the side and then gently push it back into the printer.
  • Now close the front cover of the printer.

How To Clean Brother HL-4570cdw Setup?

  • Turn off the Brother printer.
  • Make sure to remove all the wires connected to the printer.
  • Pull out the paper tray from the printer and keep it aside.
  • Take out a lint-free cloth. This will remove the dust and wipe the exteriors.
  • Wipe the paper tray with another lint-free cloth and remove the dust particles accumulated inside.
  • Take the paper tray and then insert it back into the printer.
  • Connect all the cables, connect the power cord to the power source, then turn on the printer.

How To Reset Toner On Brother HL-4570cdw?

  • Open the front panel of the Brother HL-4570cdw setup.
  • You will now have to press the Cancel button and the Secure button at the same time until you see the Reset menu appear on the Control panel display.
  • Now press the OK button and use the navigation button to select the Toner Reset option.
  • Press the OK button again.

Steps: Brother HL-4570cdw Factory Reset

  • Make sure the Brother printer is turned on.
  • Press the + or the – button on the printer to select the Reset Menu option.
  • Now again, press the + or the – button on the printer to select the Factory Reset option.
  • Press the OK button.
  • Press the + or – button and select the Reset option.

How To Reset DRUM Counter On Brother HL-4570cdw?

  • Make sure the Brother HL-4570cdw setup is turned on.
  • You will now have to work on the settings on the printer Control panel.
  • Press the + button on the printer Control panel and then select the Machine Info.
  • Press the OK button.
  • Press the + button on the printer Control Panel and find the option Reset Parts Life, then press the OK button.
  • Press the + button on the printer Control panel to find the Drum Unit option. Press the OK button.
  • Press the + button on the Control panel to select the option Reset Drum Counter.

Brother HL-4570cdw Setup Troubleshooting

The Brother HL 4570CDW printer has quite a few problems as other printers and there are some troubleshooting steps to get rid of the errors. The most common printer issues are related to paper, printing, printer connection, toner cartridges, etc. On this page, we have provided the troubleshooting steps for few printer issues.

Guide: Brother HL-4570cdw Offline

  • Initially, check if the Brother HL-4570cdw setup is turned on.
  • For a printer connected over a wireless network, check if the router is turned on.
  • Make sure to check the printer control panel if there are any errors displayed.
  • Print out a network configuration page to see if the printer is still connected to the wireless network. If disconnected, the printer might go off.
  • If the printer is connected to a Windows compute, go to Settings > Devices & Printers. Then right-click your printer and select it as the default printer.
  • Make sure that the Use printer offline option is not selected.
  • Clear the pending print jobs in the print queue.
Brother HL-4570cdw Says Offline

BBrother HL-4570cdw Printing Issues

  • Ensure that the Brother HL-4570cdw setup is connected firmly to the power source.
  • See if the toner cartridges are properly installed in the drum unit inside the printer.
  • Make sure the cable connected to the printer is not broken. Replace the cable if it is damaged.
  • Make sure there are no paper jams. Make sure to have the paper placed evenly in the paper tray to print without any issues.

Fixed: Brother HL-4570cdw Paper Jam

  • Paper jams usually happen in 5 places in the Brother HL 4570CDW printer.
  • Jam in the paper tray- Pull out the paper tray, make sure the papers are properly placed inside, and then remove the jammed paper.
  • Jam in Tray 2- Remove the second tray from the printer and remove the jammed paper and fragments of paper from the tray.
  • Jam in the duplexer- Make sure the printer is turned on and let it cool for a couple of minutes. Pull the paper tray and then remove the jammed paper that is stuck inside the rollers.
  • Jam at the rear end of the printer- Open the back cover of the Brother printer, see if there are any jammed paper present inside. Remove the jammed paper from the rear end.
  • Jam inside the printer- Open the front panel of the Brother HL-4570cdw setup and pull out the drum unit. See if there is any jammed paper present.

Copyright © 2021 - 2022 printer-setup.us | All Rights Reserved.

printer setup support
➤