Brother DCP-L5650DN Setup Guidance

Open the Brother DCP-L5650DN printer box and verify the printer components

  • Find protective tapes and covers over the Brother DCP L5650DN printer box and remove them.
  • Open the box and locate the printer and its components.

The printer components are:

  • Drum unit & Toner Cartridge assembly
  • AC Power cable
  • Basic User’s Guide
  • Printer software CD
  • Telephone Line cord
  • Quick Setup Guide
  • Product Safety Guide

Take out the packing components & install the drum unit and toner cartridge assembly

  • Prefer an even surface and place the Brother DCP-L5650DN Setup on it.
  • Check for packing materials inside and outside the machine and remove them.
  • Remove the drum unit & toner cartridge assembly from the printer.
  • Take out the orange colored plastic from the drum unit.
  • Re-fix the drum unit & toner cartridge assembly into the Brother DCP L5650DN printer.

Locate the paper tray of the machine with compatible sheets

  • Extend the paper tray of the Brother DCP L5650DN printer to its maximum limit.
  • Take a stack of enough sheets and tap on a flat surface.
  • Place the sheets in the paper tray.
  • Insert the tray into the Brother DCP L5650DN printer.

Execute the power connection of the Brother DCP-L5650DN machine

  • Find the AC power provided in the printer box and unpack it.
  • Attach one end of the cable to the Brother DCP-L5650DN printer and another end to an electrical outlet directly.
  • Do not connect the cable to a surge protector as it may produce power fluctuations.
  • Connect the telephone line cable if needed.

Install the printer software & Execute the connection of the Brother DCP-L5650DN printer.

  • Download the printer driver.
  • Install the driver once you download it.
  • Configure the connection between your Brother DCP-L5650DN printer and computer while installing the driver.

Brother DCP-L5650DN Driver Download

The driver is the most important factor which helps to perform the operations of the Brother DCP L5650DN printer from your computer or laptop in which you have downloaded the printer driver.

Brother DCP L5650DN Driver for Windows users

Driver for Brother DCP-L5650DN Windows

Brother DCP L5650DN Driver for Mac users

Driver for DCP-L5650DN Printer

Brother DCP-L5650DN Manual Download

Download the softcopy of the Brother DCP L5650DN printer’s manual on your Mac or Windows computer by using the below given Manual Download button. The manual file is in the PDF format.

manual for DCP-L5650DN Printer

The hardcopy of the manual can also be found in the printer box.

Brother DCP-L5650DN Driver Installation

  • The Brother DCP L5650DN printer driver installation can be processed after downloading it. You can download the driver by using the Driver Download buttons on this page.
  • After downloading the Brother DCP-L5650DN Setup software, double-click driver file to begin the installation process.
  • Continue with the instructions on the screen to execute the installation process.

How to Print on Brother DCP-L5650DN Setup?

  • Make sure that you have downloaded the recent version of the Brother printer driver is installed on your computer.
  • On your computer’s display, double-click the Brother DCP L5650DN printer software to open the print command window.
  • Choose your Brother printer and select Printing Properties or Preferences button.
  • The printer driver window displays on the screen.
  • Ensure that you have loaded suitable and compatible sheets in the paper tray of the Brother DCP L5650DN printer.
  • Use the Paper Size drop-down list to configure the paper size.
  • Choose either Portrait or Landscape option in the Orientation field.
  • Specify the number of copies you need to print in the Copies field.
  • Select the Media Type drop-down list, choose the type of sheets which you have loaded in the paper tray of the Brother machine.
  • Change the other print configuration if required. Tap OK to begin the print function.

Guide: Brother DCP-L5650DN Toner Installation

  • Before you begin the toner installation process, ensure that the Brother DCP-L5650DN printer is powered on.
  • Open the access cover at the front of the Brother machine.
  • Take out the toner cartridge & drum unit assembly from the Brother DCP L5650DN printer.
  • Remove the drum unit with toner cartridge from the printer.
  • Take a new toner cartridge and unpack it. Also, remove the protective cover of the cartridge.
  • Insert the cartridge into the drum unit.
  • Fix the drum unit into the Brother DCP L5650DN setup.
  • Clean the corona wire of the drum unit and close the access cover and complete the toner installation process.

How to Copy on Brother DCP-L5650DN Printer?

  • Ensure that you have loaded suitable sheets in the paper tray of the Brother DCP L5650DN printer.
  • Place your document either on the scanner glass or in the ADF of the printer for scanning.

Note:If you use the scanner glass for placing the document for scanning, make sure that the document is positioned with their printed side facing up. For ADF (Automatic Document Feeder), position the document to be scanned with their printed side facing down.

  • Tap the Copy icon on the control panel of the Brother DCP L5650DN printer.
  • Change the other copy settings if needed.
  • Tap Start to begin the scan process.

Brother DCP-L5650DN Duplex Printing Guidance

  • Open the print command window by using the Brother DCP-L5650DN printer software on your computer or laptop.
  • Choose the name & model of your printer.
  • Select the Printing Properties or Preferences button.
  • "Now" the printer driver window displays on the screen.
  • Choose the Portrait or Landscape option in the Orientation field.
  • Select the 2-Sided option by using the 2-Sided/Booklet drop-down list.
  • Click the 2-Sided Settings button.
  • Choose any one option under the 2-Sided Type menu.
  • Click the checkbox near Binding Offset and tap OK.
  • Follow the instructions on the display and complete the duplex printing process.

Guide: Brother DCP-L5650DN Default Password

Brother DCP-l5650DN printer’s default passkey is intipass. The passkey is used to secure your Brother DCP-L5650DN printer with a new one.

Steps: Reset Brother DCP-L5650DN

  • Resetting the Brother DCP-L5650DN printer is the most common solution for any issues that occur with it.
  • Refer to the simple & quick steps in the following steps to reset the Brother DCP-L5650DN setup.
  • Tap the Settings icon or key on the front panel of the Brother DCP-L5650DN printer.
  • Go to All Settings --> Initial Setup --> Reset.
  • Use the arrow keys to select the reset type.
  • Press the OK button for 2 seconds.
  • Now the Brother DCP-L5650DN printer restarts after resetting by itself.
Brother DCP-L5650DN Setup

Guide: Brother DCP-L5650DN Toner Reset

  • Open the access door at the front of the Brother DCP-L5650DN setup and keep it opened.
  • Hold the Back button until the Machine Info message displays on the panel.
  • Press the Cancel and Secure buttons at the same time.
  • Use the up and down arrow keys to select the toner cartridge which you need to reset. Tap OK. Tap the Up arrow button to begin the reset process.
  • Close the access cover and complete the toner reset process.

Guide: Brother DCP-L5650DN Drum Reset

  • Begin the Brother DCP-L5650DN toner reset process by powering it up.
  • Tap the Settings icon or key on the front panel of the machine.
  • Select Settings --> All Settings --> Machine Info. --> Parts Life.
  • Hold the Drum option until the message on the touchscreen changes.
  • Tap Yes to begin the drum reset process.
  • Tap the Home button to close the reset menu on the front panel of the Brother DCP L5650DN setup.
printer setup support