Guidance: Canon Printer Error Code

The Canon printer may cause some errors at times. The error occurs if there is any improper functioning of the Canon printer. So, go through the manual of your Canon printer before you set it up and perform its functions. The errors can be detected by flashing of error lights on the control panel of the Canon printer. The first and foremost solution to fix any Canon printer error code is resetting the machine. You can reset the Canon printer either by using a related option on the function panel of the machine or performing the hard reset process.

Quick Steps to Hard Reset the Canon Printer

How to Reset Canon Printer
  • Power off your Canon printer if it is turned on.
  • Wait until the printer powers off and settles.
  • Leave the printer to cool down.
  • Disconnect the power cable of the Canon printer.
  • Wait for a few minutes.
  • Check if the cable is not damaged.
  • Reconnect the cable to the power port of the Canon printer and electrical outlet directly.
  • Never plug the power cable to a surge protector as it may cause power fluctuations.
  • Make sure that the electrical outlet is providing a strong power connection.

Simple Procedure to Reset the Canon Printer using its Control Panel

Note: The procedure to reset the Canon printer by using its control panel slightly varies based on the model of the machine.

  • Turn on your Canon printer.
  • Go to Menu by using its key.
  • Find the Setup menu by using the arrow keys.
  • Navigate to the Device Settings option and tap OK to select it.
  • Choose the Reset Settings option and tap OK to reset your Canon printer.
Continue reading the blog to know more about some common errors that occur with the Canon printer and quick solutions to troubleshoot them.

Fixed: Canon Printer Error Code E5

canon-printer-error-code-e5

The Canon Printer error code E5 is the most common error of Canon printers. This error occurs due to any issues with the ink cartridges of the printer. To prevent your printer from this error, you have to make sure that the ink cartridges are compatible with the model of the machine. Also, the cartridges should be fixed into their slots properly.

Solutions for Error Code E5

  • Restore the Canon printer.
  • Configure the printer’s counter to zero.

Steps: Restore the Canon Printer

  • Disconnect the power cable of the Canon printer.
  • Wait for a few minutes.
  • Reconnect the cable by pressing the Stop/Reset button on the printer’s control panel.
  • Hold the Stop/Reset key and press the ON/OFF button.
  • Now release the Stop/Reset key and tap it for two times.
  • Leave your printer to get idle.
  • Tap the Stop/Reset key 4 times.
  • Click the ON/OFF button for 2 times and fix the error.

Configure the Printer’s Counter to Zero

  • Connect the power cable of the Canon printer if it is disconnected.
  • Hold the Stop/Reset button on the control panel of the printer.
  • Tap the ON/OFF key and release the Stop/Reset key.
  • Wait until the LED of the Canon printer starts to blink in green.
  • Now press the Stop/Reset key for 4 times.
  • The printer’s counter sets back to zero.
  • Now disconnect the power cable of the Canon printer.
  • Wait for a few minutes, connect the cable, and turn on the printer.
  • In order to get rid of the issues with the Canon printer, make sure that you use the machine properly.
  • Keep the machine away from dust and foreign particles. Also, make sure that the printer is placed in a moderate environment.
  • If you find it difficult to fix the errors with the Canon printer, check the printer’s warranty and replace it with a new one.
  • For more Canon printer error code solution contact our experts.
printer setup support